Work out your fence
The block size is the median of 231 house lots in Bonville. The metres are an estimate; change them to match your property.
Bonville 2450 · Coffs Harbour · New South Wales
A standard fence costs $150–$200/m installed. Your half of a typical dividing fence is about $6,170–$8,340.
Your 50/50 share · treated pine paling
$6,170–$8,340
83.4 m on a typical block · NSW median of fencers’ prices
The block size is the median of 231 house lots in Bonville. The metres are an estimate; change them to match your property.
| Fence | Per metre | Your share | Whole fence | Front fence |
|---|---|---|---|---|
| Treated pine palingMost commondividing, frontNSW median of fencers’ prices | $150–$200/m | $6,170–$8,340 | $12,340–$16,680 | $2,660–$3,600 |
| Colorbond steeldividing, frontNSW median of fencers’ prices | $130–$160/m | $5,210–$6,590 | $10,430–$13,180 | $2,250–$2,840 |
| Chain wire / chain linkdividingNational price | $30–$150/m | $1,250–$6,260 | $2,500–$12,510 | $540–$2,700 |
| PVC / vinylfront, dividingNational price | $40–$90/m | $1,670–$3,750 | $3,340–$7,510 | $720–$1,620 |
| Timber picketfrontNational price | $60–$350/m | $2,420–$14,600 | $4,840–$29,190 | $1,040–$6,300 |
| Aluminium slat / pool fencingpool, front, screen, dividingNational price | $80–$400/m | $3,340–$16,680 | $6,670–$33,360 | $1,440–$7,200 |
| Tubular metalfront, poolNational price | $180–$350/m | $7,510–$14,600 | $15,010–$29,190 | $3,240–$6,300 |
| Hardwood paling / lapped and cappeddividing, frontNSW median of fencers’ prices | $180–$320/m | $7,670–$13,180 | $15,350–$26,350 | $3,310–$5,690 |
| Semi-frameless glasspool, frontNational price | $200–$280/m | $8,340–$11,470 | $16,680–$22,940 | $3,600–$4,950 |
| Timber slat / horizontal slat screenscreen, front, dividingNational price | $250–$450/m | $10,430–$18,770 | $20,850–$37,530 | $4,500–$8,100 |
| Frameless glasspoolNational price | $280–$700+/m | $11,470–$29,190+ | $22,940–$58,380+ | $4,950–$12,600+ |
| Wrought iron / cast ironfrontNational price | $450–$1,000/m | $18,770–$41,700 | $37,530–$83,400 | $8,100–$18,000 |
| Brick, stone or rendered masonryfront, dividingNational price | $500–$1,200+/m | $20,850–$50,040+ | $41,700–$100,080+ | $9,000–$21,600+ |
| Sandstone and timberfrontNational price | $800–$1,200/m | $33,360–$50,040 | $66,720–$100,080 | $14,400–$21,600 |
Rows marked National price use the national range because we have fewer than 2 local fencer prices for that type. See published prices.
Old fence removal and disposal usually adds $20–$40 per metre, typically about $30. That’s around 20% of a typical Colorbond or paling price (usually 15–25%).
Rocky or hard ground usually adds $15–$45 per metre, typically about $25. That’s around 15% of a typical Colorbond or paling rate (usually 10–25%). Very hard ground sits at the high end.
A plinth or sleeper under the fence, for a small level change or to close the gap at the bottom, usually adds $10–$30 per metre, typically about $20.
Slopes, retaining, trees and tight access are confirmed by your fencer. Extras are calculated separately and do not compound.
Coffs Harbour fence rules · Read the full rules
A treated pine paling fence is $150–$200/m. Your typical 50/50 share for 83.4 m is $6,170–$8,340.
Neighbours generally split a sufficient dividing fence 50/50. If you want a higher standard, you pay the extra.
Up to 1.2 m in most residential zones without approval. A higher front fence needs a complying development certificate or a DA.
Yes. Removal is an optional per-metre extra. The fencer confirms the final cost and any licensed asbestos work.
Block-size source: NSW Cadastre (Lot layer) and NSW Administrative Boundaries (Suburb, LGA) © Spatial Services, NSW Department of Customer Service (CC BY 4.0). Last updated 17 Nov 2026. Cadastre: Vicmap © Department of Transport and Planning (Vic), NSW Spatial Services, Queensland Government (QSpatial), theLIST © State of Tasmania and ACTmapi, used under CC BY 4.0. SA, WA and NT block sizes are typical-block assumptions.
Your typical 50/50 share in Bonville is $6,170–$8,340.