Work out your fence
The block size is Median of 18 house lots in Boambee. The metres are an estimate; change them to match your property.
Boambee 2450 · Coffs Harbour · New South Wales
A standard fence costs $150–$200/m installed. Your half of a typical dividing fence is about $7,800–$10,540.
Your 50/50 share · treated pine paling
$7,800–$10,540
105.4 m on a typical block · NSW median of fencers’ prices
The block size is Median of 18 house lots in Boambee. The metres are an estimate; change them to match your property.
| Fence | Price per metre | Your 50/50 share | Whole dividing fence | Front fence |
|---|---|---|---|---|
| Treated pine palingMost commondividing, frontNSW median of fencers’ prices | $150–$200/m | $7,800–$10,540 | $15,600–$21,080 | $2,960–$4,000 |
| Colorbond steeldividing, frontNSW median of fencers’ prices | $130–$160/m | $6,590–$8,330 | $13,180–$16,650 | $2,500–$3,160 |
| Chain wire / chain linkdividingNational range (few local prices yet) | $30–$150/m | $1,580–$7,910 | $3,160–$15,810 | $600–$3,000 |
| PVC / vinylfront, dividingNational range (few local prices yet) | $40–$90/m | $2,110–$4,740 | $4,220–$9,490 | $800–$1,800 |
| Timber picketfrontNational range (few local prices yet) | $60–$350/m | $3,060–$18,450 | $6,110–$36,890 | $1,160–$7,000 |
| Aluminium slat / pool fencingpool, front, screen, dividingNational range (few local prices yet) | $80–$400/m | $4,220–$21,080 | $8,430–$42,160 | $1,600–$8,000 |
| Tubular metalfront, poolNational range (few local prices yet) | $180–$350/m | $9,490–$18,450 | $18,970–$36,890 | $3,600–$7,000 |
| Hardwood paling / lapped and cappeddividing, frontNSW median of fencers’ prices | $180–$320/m | $9,700–$16,650 | $19,390–$33,310 | $3,680–$6,320 |
| Semi-frameless glasspool, frontNational range (few local prices yet) | $200–$280/m | $10,540–$14,490 | $21,080–$28,990 | $4,000–$5,500 |
| Timber slat / horizontal slat screenscreen, front, dividingNational range (few local prices yet) | $250–$450/m | $13,180–$23,720 | $26,350–$47,430 | $5,000–$9,000 |
| Frameless glasspoolNational range (few local prices yet) | $280–$700+/m | $14,490–$36,890+ | $28,990–$73,780+ | $5,500–$14,000+ |
| Wrought iron / cast ironfrontNational range (few local prices yet) | $450–$1,000/m | $23,720–$52,700 | $47,430–$105,400 | $9,000–$20,000 |
| Brick, stone or rendered masonryfront, dividingNational range (few local prices yet) | $500–$1,200+/m | $26,350–$63,240+ | $52,700–$126,480+ | $10,000–$24,000+ |
| Sandstone and timberfrontNational range (few local prices yet) | $800–$1,200/m | $42,160–$63,240 | $84,320–$126,480 | $16,000–$24,000 |
Grey price-source rows use a state or national fallback. A national range is indicative and may have few local prices.
Old fence removal and disposal usually adds $20–$40 per metre, typically about $30. That’s around 20% of a typical Colorbond or paling price (usually 15–25%).
Rocky or hard ground usually adds $15–$45 per metre, typically about $25. That’s around 15% of a typical Colorbond or paling rate (usually 10–25%). Very hard ground sits at the high end.
A plinth or sleeper under the fence, for a small level change or to close the gap at the bottom, usually adds $10–$30 per metre, typically about $20.
Slopes, retaining, trees and tight access are confirmed by your fencer. Extras are calculated separately and do not compound.
Coffs Harbour fence rules · Read the full rules
A treated pine paling fence is $150–$200/m. Your typical 50/50 share for 105.4 m is $7,800–$10,540.
Neighbours generally split a sufficient dividing fence 50/50. If you want a higher standard, you pay the extra.
Up to 1.2 m in most residential zones without approval. A higher front fence needs a complying development certificate or a DA.
Yes. Removal is an optional per-metre extra. The fencer confirms the final cost and any licensed asbestos work.
Block-size source: NSW Cadastre (Lot layer) and NSW Administrative Boundaries (Suburb, LGA) © Spatial Services, NSW Department of Customer Service (CC BY 4.0). Last updated 17 Nov 2026. Cadastre: Vicmap © Department of Transport and Planning (Vic), NSW Spatial Services, Queensland Government (QSpatial), theLIST © State of Tasmania and ACTmapi, used under CC BY 4.0. SA, WA and NT block sizes are typical-block assumptions.
Your typical 50/50 share in Boambee is $7,800–$10,540.
| Fencer | Fence | Height | Published rate | Source |
|---|---|---|---|---|
| No local source rows are published yet. | ||||
Price research is available in how we price.