Work out your fence
The block size is Median of 2609 house lots in Belmore. The metres are an estimate; change them to match your property.
Belmore 2192 · Canterbury-Bankstown · New South Wales
A standard fence costs $170–$220/m installed. Your half of a typical dividing fence is about $7,760–$10,110.
Your 50/50 share · treated pine paling
$7,760–$10,110
94 m on a typical block · Wider-area fencers’ prices (3 fencers)
The block size is Median of 2609 house lots in Belmore. The metres are an estimate; change them to match your property.
| Fence | Price per metre | Your 50/50 share | Whole dividing fence | Front fence |
|---|---|---|---|---|
| Treated pine palingMost commondividing, frontWider-area fencers’ prices (3 fencers) | $170–$220/m | $7,760–$10,110 | $15,510–$20,210 | $2,060–$2,690 |
| Colorbond steeldividing, frontWider-area fencers’ prices (4 fencers) | $130–$170/m | $6,060–$7,760 | $12,130–$15,510 | $1,610–$2,060 |
| Chain wire / chain linkdividingNational range (few local prices yet) | $30–$150/m | $1,410–$7,050 | $2,820–$14,100 | $380–$1,880 |
| PVC / vinylfront, dividingNational range (few local prices yet) | $40–$90/m | $1,880–$4,230 | $3,760–$8,460 | $500–$1,130 |
| Timber picketfrontNational range (few local prices yet) | $60–$350/m | $2,730–$16,450 | $5,450–$32,900 | $730–$4,380 |
| Aluminium slat / pool fencingpool, front, screen, dividingNational range (few local prices yet) | $80–$400/m | $3,760–$18,800 | $7,520–$37,600 | $1,000–$5,000 |
| Tubular metalfront, poolNational range (few local prices yet) | $180–$350/m | $8,460–$16,450 | $16,920–$32,900 | $2,250–$4,380 |
| Hardwood paling / lapped and cappeddividing, frontNSW median of fencers’ prices | $180–$320/m | $8,650–$14,850 | $17,300–$29,700 | $2,300–$3,950 |
| Semi-frameless glasspool, frontNational range (few local prices yet) | $200–$280/m | $9,400–$12,930 | $18,800–$25,850 | $2,500–$3,440 |
| Timber slat / horizontal slat screenscreen, front, dividingNational range (few local prices yet) | $250–$450/m | $11,750–$21,150 | $23,500–$42,300 | $3,130–$5,630 |
| Frameless glasspoolNational range (few local prices yet) | $280–$700+/m | $12,930–$32,900+ | $25,850–$65,800+ | $3,440–$8,750+ |
| Wrought iron / cast ironfrontNational range (few local prices yet) | $450–$1,000/m | $21,150–$47,000 | $42,300–$94,000 | $5,630–$12,500 |
| Brick, stone or rendered masonryfront, dividingNational range (few local prices yet) | $500–$1,200+/m | $23,500–$56,400+ | $47,000–$112,800+ | $6,250–$15,000+ |
| Sandstone and timberfrontNational range (few local prices yet) | $800–$1,200/m | $37,600–$56,400 | $75,200–$112,800 | $10,000–$15,000 |
Grey price-source rows use a state or national fallback. A national range is indicative and may have few local prices.
Old fence removal and disposal usually adds $20–$40 per metre, typically about $30. That’s around 20% of a typical Colorbond or paling price (usually 15–25%).
Rocky or hard ground usually adds $15–$45 per metre, typically about $25. That’s around 15% of a typical Colorbond or paling rate (usually 10–25%). Very hard ground sits at the high end.
A plinth or sleeper under the fence, for a small level change or to close the gap at the bottom, usually adds $10–$30 per metre, typically about $20.
Slopes, retaining, trees and tight access are confirmed by your fencer. Extras are calculated separately and do not compound.
Canterbury-Bankstown fence rules · Read the full rules
We’ve checked some of Canterbury-Bankstown’s pages, not all. Where there’s no council rule on file we show the New South Wales rule. Check with council before you build.
A treated pine paling fence is $170–$220/m. Your typical 50/50 share for 94 m is $7,760–$10,110.
Neighbours generally split a sufficient dividing fence 50/50. If you want a higher standard, you pay the extra.
Up to 1.2 m in most residential zones without approval. A higher front fence needs a complying development certificate or a DA.
Yes. Removal is an optional per-metre extra. The fencer confirms the final cost and any licensed asbestos work.
Block-size source: NSW Cadastre (Lot layer) and NSW Administrative Boundaries (Suburb, LGA) © Spatial Services, NSW Department of Customer Service (CC BY 4.0). Last updated 17 Nov 2026. Cadastre: Vicmap © Department of Transport and Planning (Vic), NSW Spatial Services, Queensland Government (QSpatial), theLIST © State of Tasmania and ACTmapi, used under CC BY 4.0. SA, WA and NT block sizes are typical-block assumptions.
Your typical 50/50 share in Belmore is $7,760–$10,110.
| Fencer | Fence | Height | Published rate | Source |
|---|---|---|---|---|
| Glovers Fencing | Colorbond | 1.8 m | $120–$140 | gloversfencing.com.au · checked 16 Nov 2026 |
Price research is available in how we price.