Work out your fence
The block size is Median of 1124 house lots in Belfield. The metres are an estimate; change them to match your property.
Belfield 2191 · Canterbury-Bankstown · New South Wales
A standard fence costs $170–$220/m installed. Your half of a typical dividing fence is about $8,130–$10,600.
Your 50/50 share · treated pine paling
$8,130–$10,600
98.6 m on a typical block · Wider-area fencers’ prices (3 fencers)
The block size is Median of 1124 house lots in Belfield. The metres are an estimate; change them to match your property.
| Fence | Price per metre | Your 50/50 share | Whole dividing fence | Front fence |
|---|---|---|---|---|
| Treated pine palingMost commondividing, frontWider-area fencers’ prices (3 fencers) | $170–$220/m | $8,130–$10,600 | $16,270–$21,200 | $2,010–$2,620 |
| Colorbond steeldividing, frontWider-area fencers’ prices (4 fencers) | $130–$170/m | $6,360–$8,130 | $12,720–$16,270 | $1,570–$2,010 |
| Chain wire / chain linkdividingNational range (few local prices yet) | $30–$150/m | $1,480–$7,400 | $2,960–$14,790 | $370–$1,830 |
| PVC / vinylfront, dividingNational range (few local prices yet) | $40–$90/m | $1,970–$4,440 | $3,940–$8,870 | $490–$1,100 |
| Timber picketfrontNational range (few local prices yet) | $60–$350/m | $2,860–$17,260 | $5,720–$34,510 | $710–$4,270 |
| Aluminium slat / pool fencingpool, front, screen, dividingNational range (few local prices yet) | $80–$400/m | $3,940–$19,720 | $7,890–$39,440 | $980–$4,880 |
| Tubular metalfront, poolNational range (few local prices yet) | $180–$350/m | $8,870–$17,260 | $17,750–$34,510 | $2,200–$4,270 |
| Hardwood paling / lapped and cappeddividing, frontNSW median of fencers’ prices | $180–$320/m | $9,070–$15,580 | $18,140–$31,160 | $2,240–$3,860 |
| Semi-frameless glasspool, frontNational range (few local prices yet) | $200–$280/m | $9,860–$13,560 | $19,720–$27,120 | $2,440–$3,360 |
| Timber slat / horizontal slat screenscreen, front, dividingNational range (few local prices yet) | $250–$450/m | $12,330–$22,190 | $24,650–$44,370 | $3,050–$5,490 |
| Frameless glasspoolNational range (few local prices yet) | $280–$700+/m | $13,560–$34,510+ | $27,120–$69,020+ | $3,360–$8,540+ |
| Wrought iron / cast ironfrontNational range (few local prices yet) | $450–$1,000/m | $22,190–$49,300 | $44,370–$98,600 | $5,490–$12,200 |
| Brick, stone or rendered masonryfront, dividingNational range (few local prices yet) | $500–$1,200+/m | $24,650–$59,160+ | $49,300–$118,320+ | $6,100–$14,640+ |
| Sandstone and timberfrontNational range (few local prices yet) | $800–$1,200/m | $39,440–$59,160 | $78,880–$118,320 | $9,760–$14,640 |
Grey price-source rows use a state or national fallback. A national range is indicative and may have few local prices.
Old fence removal and disposal usually adds $20–$40 per metre, typically about $30. That’s around 20% of a typical Colorbond or paling price (usually 15–25%).
Rocky or hard ground usually adds $15–$45 per metre, typically about $25. That’s around 15% of a typical Colorbond or paling rate (usually 10–25%). Very hard ground sits at the high end.
A plinth or sleeper under the fence, for a small level change or to close the gap at the bottom, usually adds $10–$30 per metre, typically about $20.
Slopes, retaining, trees and tight access are confirmed by your fencer. Extras are calculated separately and do not compound.
Canterbury-Bankstown fence rules · Read the full rules
We’ve checked some of Canterbury-Bankstown’s pages, not all. Where there’s no council rule on file we show the New South Wales rule. Check with council before you build.
A treated pine paling fence is $170–$220/m. Your typical 50/50 share for 98.6 m is $8,130–$10,600.
Neighbours generally split a sufficient dividing fence 50/50. If you want a higher standard, you pay the extra.
Up to 1.2 m in most residential zones without approval. A higher front fence needs a complying development certificate or a DA.
Yes. Removal is an optional per-metre extra. The fencer confirms the final cost and any licensed asbestos work.
Block-size source: NSW Cadastre (Lot layer) and NSW Administrative Boundaries (Suburb, LGA) © Spatial Services, NSW Department of Customer Service (CC BY 4.0). Last updated 17 Nov 2026. Cadastre: Vicmap © Department of Transport and Planning (Vic), NSW Spatial Services, Queensland Government (QSpatial), theLIST © State of Tasmania and ACTmapi, used under CC BY 4.0. SA, WA and NT block sizes are typical-block assumptions.
Your typical 50/50 share in Belfield is $8,130–$10,600.
| Fencer | Fence | Height | Published rate | Source |
|---|---|---|---|---|
| Glovers Fencing | Colorbond | 1.8 m | $120–$140 | gloversfencing.com.au · checked 16 Nov 2026 |
Price research is available in how we price.