Work out your fence
The block size is the median of 4,563 house lots in Yarraville. The metres are an estimate; change them to match your property.
Yarraville 3013 · Maribyrnong · Victoria
A standard fence costs $140–$150/m installed. Your half of a typical dividing fence is about $6,000–$6,330.
Your 50/50 share · treated pine paling
$6,000–$6,330
83.3 m on a typical block · Wider-area fencers’ prices (4 fencers)
The block size is the median of 4,563 house lots in Yarraville. The metres are an estimate; change them to match your property.
| Fence | Per metre | Your share | Whole fence | Front fence |
|---|---|---|---|---|
| Treated pine palingMost commondividing, frontWider-area fencers’ prices (4 fencers) | $140–$150/m | $6,000–$6,330 | $12,000–$12,660 | $2,040–$2,160 |
| Colorbond steeldividing, frontWider-area fencers’ prices (3 fencers) | $170–$180/m | $7,000–$7,370 | $13,990–$14,740 | $2,390–$2,510 |
| Chain wire / chain linkdividingNational price | $30–$150/m | $1,250–$6,250 | $2,500–$12,500 | $430–$2,130 |
| PVC / vinylfront, dividingNational price | $40–$90/m | $1,670–$3,750 | $3,330–$7,500 | $570–$1,280 |
| Timber picketfrontNational price | $60–$350/m | $2,420–$14,580 | $4,830–$29,160 | $820–$4,970 |
| Hardwood paling / lapped and cappeddividing, frontNational price | $80–$220/m | $3,330–$9,160 | $6,660–$18,330 | $1,140–$3,120 |
| Tubular metalfront, poolNational price | $180–$350/m | $7,500–$14,580 | $14,990–$29,160 | $2,560–$4,970 |
| Semi-frameless glasspool, frontNational price | $200–$280/m | $8,330–$11,450 | $16,660–$22,910 | $2,840–$3,910 |
| Timber slat / horizontal slat screenscreen, front, dividingNational price | $250–$450/m | $10,410–$18,740 | $20,830–$37,490 | $3,550–$6,390 |
| Frameless glasspoolNational price | $280–$700+/m | $11,450–$29,160+ | $22,910–$58,310+ | $3,910–$9,940+ |
| Aluminium slat / pool fencingpool, front, screen, dividingVIC median of fencers’ prices | $350–$510/m | $14,580–$21,240 | $29,160–$42,480 | $4,970–$7,240 |
| Wrought iron / cast ironfrontNational price | $450–$1,000/m | $18,740–$41,650 | $37,490–$83,300 | $6,390–$14,200 |
| Brick, stone or rendered masonryfront, dividingNational price | $500–$1,200+/m | $20,830–$49,980+ | $41,650–$99,960+ | $7,100–$17,040+ |
| Sandstone and timberfrontNational price | $800–$1,200/m | $33,320–$49,980 | $66,640–$99,960 | $11,360–$17,040 |
Rows marked National price use the national range because we have fewer than 2 local fencer prices for that type. See published prices.
Old fence removal and disposal usually adds $20–$40 per metre, typically about $30. That’s around 20% of a typical Colorbond or paling price (usually 15–25%).
Rocky or hard ground usually adds $15–$45 per metre, typically about $25. That’s around 15% of a typical Colorbond or paling rate (usually 10–25%). Very hard ground sits at the high end.
A plinth or sleeper under the fence, for a small level change or to close the gap at the bottom, usually adds $10–$30 per metre, typically about $20.
Slopes, retaining, trees and tight access are confirmed by your fencer. Extras are calculated separately and do not compound.
Maribyrnong fence rules · Read the full rules
We’ve checked some of Maribyrnong’s pages, not all. Where there’s no council rule on file we show the Victoria rule. Check with council before you build.
A treated pine paling fence is $140–$150/m. Your typical 50/50 share for 83.3 m is $6,000–$6,330.
Neighbours usually split a sufficient dividing fence 50/50. If you want something better, you pay the difference.
Up to 1.5 m within 3 m of the street (2 m on a declared main road), unless your planning zone sets a lower limit, sometimes 1.2 m.
Yes. Removal is an optional per-metre extra. The fencer confirms the final cost and any licensed asbestos work.
Block-size source: Vicmap Property, Vicmap Admin and road casements © Department of Transport and Planning, CC BY 4.0. Last updated 17 Nov 2026. Cadastre: Vicmap © Department of Transport and Planning (Vic), NSW Spatial Services, Queensland Government (QSpatial), theLIST © State of Tasmania and ACTmapi, used under CC BY 4.0. SA, WA and NT block sizes are typical-block assumptions.
Your typical 50/50 share in Yarraville is $6,000–$6,330.