Who pays for a dividing fence?
Neighbours usually split a sufficient dividing fence 50/50. If you want something better, you pay the difference.
Source: Official source · checked 17 Nov 2026
Victoria · local fence rules · checked 17 Nov 2026
Most fences here don’t need council approval: front fences up to 1.5 m and side or rear fences up to 2 m. Neighbours split a dividing fence 50/50.
We’ve checked some of Maribyrnong’s pages, not all. Where there’s no council rule on file we show the Victoria rule. Check with council before you build.
Neighbours usually split a sufficient dividing fence 50/50. If you want something better, you pay the difference.
Source: Official source · checked 17 Nov 2026
Up to 1.5 m within 3 m of the street (2 m on a declared main road), unless your planning zone sets a lower limit, sometimes 1.2 m.
Source: Official source · checked 17 Nov 2026
Side and rear fences under 2 m, more than 3 m from the front boundary, usually need no building permit. Masonry front fences over 1.2 m often do.
The Maribyrnong Planning Scheme applies a Neighbourhood Character Overlay in 4 mapped areas; some schedules control front fence height or style.Source ↗ · checked 16 Nov 2026
Source: Official source · checked 17 Nov 2026
Any pool or spa that can hold more than 30 cm of water needs a compliant barrier and must be registered with council. Barriers are re-inspected every 4 years.
Source: Official source · checked 17 Nov 2026
No designated Bushfire Prone Area is mapped in Maribyrnong. Check your address on VicPlan.
No Bushfire Management Overlay areas are mapped in the Maribyrnong Planning Scheme in the state overlay layer.Source ↗ · checked 16 Nov 2026
No designated Bushfire Prone Area polygon is recorded for Maribyrnong in the state BPA layer.Source ↗ · checked 16 Nov 2026
Source: Official source · checked 17 Nov 2026
The Maribyrnong planning scheme maps 201 Heritage Overlay areas. A planning permit is often needed to build or change a front fence there. A Neighbourhood Character Overlay can also control front fence height or style.
The Maribyrnong Planning Scheme has 201 Heritage Overlay areas mapped. In a Heritage Overlay a planning permit is often required to build or change a front fence; check the property and the overlay schedule.Source ↗ · checked 16 Nov 2026
Source: Official source · checked 17 Nov 2026
Yarraville has the most published lot data in Maribyrnong.
| Fence | Price per metre | Your 50/50 share |
|---|---|---|
| Treated pine paling in Yarraville | $140–$150/m | $6,000–$6,330 |
| Colorbond steel in Yarraville | $170–$180/m | $7,000–$7,370 |
Side and rear fences under 2 m, more than 3 m from the front boundary, usually need no building permit. Masonry front fences over 1.2 m often do.
Neighbours usually split a sufficient dividing fence 50/50. If you want something better, you pay the difference.
Any pool or spa that can hold more than 30 cm of water needs a compliant barrier and must be registered with council. Barriers are re-inspected every 4 years.
No designated Bushfire Prone Area is mapped in Maribyrnong. Check your address on VicPlan.
Treated pine paling is $140–$150/m. Your half of a typical dividing fence is $6,000–$6,330.
Email [email protected]. Check the council website for current contact details.
Compare local quotes with the typical price in Yarraville.
Rule headings use published category labels. Official sources should be checked before building. General information only. These are estimates, not quotes, and not legal, planning, building or financial advice. Check your own title, council and neighbour situation before you build.