Work out your fence
The block size is the median of 2 house lots in Porcupine Ridge. The metres are an estimate; change them to match your property.
Porcupine Ridge 3461 · Hepburn · Victoria
A standard fence costs $120–$150/m installed. Your half of a typical dividing fence is about $3,750–$4,850.
Your 50/50 share · treated pine paling
$3,750–$4,850
63 m on a typical block · VIC median of fencers’ prices
The block size is the median of 2 house lots in Porcupine Ridge. The metres are an estimate; change them to match your property.
| Fence | Per metre | Your share | Whole fence | Front fence |
|---|---|---|---|---|
| Treated pine palingMost commondividing, frontVIC median of fencers’ prices | $120–$150/m | $3,750–$4,850 | $7,500–$9,700 | $2,150–$2,790 |
| Colorbond steeldividing, frontVIC median of fencers’ prices | $140–$180/m | $4,320–$5,580 | $8,630–$11,150 | $2,480–$3,200 |
| Chain wire / chain linkdividingNational price | $30–$150/m | $950–$4,730 | $1,890–$9,450 | $540–$2,720 |
| PVC / vinylfront, dividingNational price | $40–$90/m | $1,260–$2,840 | $2,520–$5,670 | $720–$1,630 |
| Timber picketfrontNational price | $60–$350/m | $1,830–$11,030 | $3,650–$22,050 | $1,050–$6,340 |
| Hardwood paling / lapped and cappeddividing, frontNational price | $80–$220/m | $2,520–$6,930 | $5,040–$13,860 | $1,450–$3,980 |
| Tubular metalfront, poolNational price | $180–$350/m | $5,670–$11,030 | $11,340–$22,050 | $3,260–$6,340 |
| Semi-frameless glasspool, frontNational price | $200–$280/m | $6,300–$8,660 | $12,600–$17,330 | $3,620–$4,980 |
| Timber slat / horizontal slat screenscreen, front, dividingNational price | $250–$450/m | $7,880–$14,180 | $15,750–$28,350 | $4,530–$8,150 |
| Frameless glasspoolNational price | $280–$700+/m | $8,660–$22,050+ | $17,330–$44,100+ | $4,980–$12,670+ |
| Aluminium slat / pool fencingpool, front, screen, dividingVIC median of fencers’ prices | $350–$510/m | $11,030–$16,070 | $22,050–$32,130 | $6,340–$9,230 |
| Wrought iron / cast ironfrontNational price | $450–$1,000/m | $14,180–$31,500 | $28,350–$63,000 | $8,150–$18,100 |
| Brick, stone or rendered masonryfront, dividingNational price | $500–$1,200+/m | $15,750–$37,800+ | $31,500–$75,600+ | $9,050–$21,720+ |
| Sandstone and timberfrontNational price | $800–$1,200/m | $25,200–$37,800 | $50,400–$75,600 | $14,480–$21,720 |
Rows marked National price use the national range because we have fewer than 2 local fencer prices for that type. See published prices.
Old fence removal and disposal usually adds $20–$40 per metre, typically about $30. That’s around 20% of a typical Colorbond or paling price (usually 15–25%).
Rocky or hard ground usually adds $15–$45 per metre, typically about $25. That’s around 15% of a typical Colorbond or paling rate (usually 10–25%). Very hard ground sits at the high end.
A plinth or sleeper under the fence, for a small level change or to close the gap at the bottom, usually adds $10–$30 per metre, typically about $20.
Slopes, retaining, trees and tight access are confirmed by your fencer. Extras are calculated separately and do not compound.
Hepburn fence rules · Read the full rules
A treated pine paling fence is $120–$150/m. Your typical 50/50 share for 63 m is $3,750–$4,850.
Neighbours usually split a sufficient dividing fence 50/50. If you want something better, you pay the difference.
Up to 1.5 m within 3 m of the street (2 m on a declared main road), unless your planning zone sets a lower limit, sometimes 1.2 m.
Yes. Removal is an optional per-metre extra. The fencer confirms the final cost and any licensed asbestos work.
Block-size source: Vicmap Property, Vicmap Admin and road casements © Department of Transport and Planning, CC BY 4.0. Last updated 17 Nov 2026. Cadastre: Vicmap © Department of Transport and Planning (Vic), NSW Spatial Services, Queensland Government (QSpatial), theLIST © State of Tasmania and ACTmapi, used under CC BY 4.0. SA, WA and NT block sizes are typical-block assumptions.
Your typical 50/50 share in Porcupine Ridge is $3,750–$4,850.