Work out your fence
The block size is the median of 920 house lots in Daylesford. The metres are an estimate; change them to match your property.
Daylesford 3460 · Hepburn · Victoria
A standard fence costs $120–$150/m installed. Your half of a typical dividing fence is about $5,710–$7,390.
Your 50/50 share · treated pine paling
$5,710–$7,390
96 m on a typical block · VIC median of fencers’ prices
The block size is the median of 920 house lots in Daylesford. The metres are an estimate; change them to match your property.
| Fence | Per metre | Your share | Whole fence | Front fence |
|---|---|---|---|---|
| Treated pine palingMost commondividing, frontVIC median of fencers’ prices | $120–$150/m | $5,710–$7,390 | $11,420–$14,780 | $2,270–$2,940 |
| Colorbond steeldividing, frontVIC median of fencers’ prices | $140–$180/m | $6,580–$8,500 | $13,150–$16,990 | $2,620–$3,380 |
| Chain wire / chain linkdividingNational price | $30–$150/m | $1,440–$7,200 | $2,880–$14,400 | $570–$2,870 |
| PVC / vinylfront, dividingNational price | $40–$90/m | $1,920–$4,320 | $3,840–$8,640 | $760–$1,720 |
| Timber picketfrontNational price | $60–$350/m | $2,780–$16,800 | $5,570–$33,600 | $1,110–$6,690 |
| Hardwood paling / lapped and cappeddividing, frontNational price | $80–$220/m | $3,840–$10,560 | $7,680–$21,120 | $1,530–$4,200 |
| Tubular metalfront, poolNational price | $180–$350/m | $8,640–$16,800 | $17,280–$33,600 | $3,440–$6,690 |
| Semi-frameless glasspool, frontNational price | $200–$280/m | $9,600–$13,200 | $19,200–$26,400 | $3,820–$5,250 |
| Timber slat / horizontal slat screenscreen, front, dividingNational price | $250–$450/m | $12,000–$21,600 | $24,000–$43,200 | $4,780–$8,600 |
| Frameless glasspoolNational price | $280–$700+/m | $13,200–$33,600+ | $26,400–$67,200+ | $5,250–$13,370+ |
| Aluminium slat / pool fencingpool, front, screen, dividingVIC median of fencers’ prices | $350–$510/m | $16,800–$24,480 | $33,600–$48,960 | $6,690–$9,740 |
| Wrought iron / cast ironfrontNational price | $450–$1,000/m | $21,600–$48,000 | $43,200–$96,000 | $8,600–$19,100 |
| Brick, stone or rendered masonryfront, dividingNational price | $500–$1,200+/m | $24,000–$57,600+ | $48,000–$115,200+ | $9,550–$22,920+ |
| Sandstone and timberfrontNational price | $800–$1,200/m | $38,400–$57,600 | $76,800–$115,200 | $15,280–$22,920 |
Rows marked National price use the national range because we have fewer than 2 local fencer prices for that type. See published prices.
Old fence removal and disposal usually adds $20–$40 per metre, typically about $30. That’s around 20% of a typical Colorbond or paling price (usually 15–25%).
Rocky or hard ground usually adds $15–$45 per metre, typically about $25. That’s around 15% of a typical Colorbond or paling rate (usually 10–25%). Very hard ground sits at the high end.
A plinth or sleeper under the fence, for a small level change or to close the gap at the bottom, usually adds $10–$30 per metre, typically about $20.
Slopes, retaining, trees and tight access are confirmed by your fencer. Extras are calculated separately and do not compound.
Hepburn fence rules · Read the full rules
A treated pine paling fence is $120–$150/m. Your typical 50/50 share for 96 m is $5,710–$7,390.
Neighbours usually split a sufficient dividing fence 50/50. If you want something better, you pay the difference.
Up to 1.5 m within 3 m of the street (2 m on a declared main road), unless your planning zone sets a lower limit, sometimes 1.2 m.
Yes. Removal is an optional per-metre extra. The fencer confirms the final cost and any licensed asbestos work.
Block-size source: Vicmap Property, Vicmap Admin and road casements © Department of Transport and Planning, CC BY 4.0. Last updated 17 Nov 2026. Cadastre: Vicmap © Department of Transport and Planning (Vic), NSW Spatial Services, Queensland Government (QSpatial), theLIST © State of Tasmania and ACTmapi, used under CC BY 4.0. SA, WA and NT block sizes are typical-block assumptions.
Your typical 50/50 share in Daylesford is $5,710–$7,390.