Work out your fence
The block size is the median of 10 house lots in Langwarrin South. The metres are an estimate; change them to match your property.
Langwarrin South 3911 · Frankston · Victoria
A standard fence costs $140–$150/m installed. Your half of a typical dividing fence is about $8,930–$9,420.
Your 50/50 share · treated pine paling
$8,930–$9,420
124 m on a typical block · Wider-area fencers’ prices (4 fencers)
The block size is the median of 10 house lots in Langwarrin South. The metres are an estimate; change them to match your property.
| Fence | Per metre | Your share | Whole fence | Front fence |
|---|---|---|---|---|
| Treated pine palingMost commondividing, frontWider-area fencers’ prices (4 fencers) | $140–$150/m | $8,930–$9,420 | $17,860–$18,850 | $2,400–$2,540 |
| Colorbond steeldividing, frontWider-area fencers’ prices (3 fencers) | $170–$180/m | $10,420–$10,970 | $20,830–$21,950 | $2,810–$2,960 |
| Chain wire / chain linkdividingNational price | $30–$150/m | $1,860–$9,300 | $3,720–$18,600 | $500–$2,510 |
| PVC / vinylfront, dividingNational price | $40–$90/m | $2,480–$5,580 | $4,960–$11,160 | $670–$1,500 |
| Timber picketfrontNational price | $60–$350/m | $3,600–$21,700 | $7,190–$43,400 | $970–$5,850 |
| Hardwood paling / lapped and cappeddividing, frontNational price | $80–$220/m | $4,960–$13,640 | $9,920–$27,280 | $1,340–$3,670 |
| Tubular metalfront, poolNational price | $180–$350/m | $11,160–$21,700 | $22,320–$43,400 | $3,010–$5,850 |
| Semi-frameless glasspool, frontNational price | $200–$280/m | $12,400–$17,050 | $24,800–$34,100 | $3,340–$4,590 |
| Timber slat / horizontal slat screenscreen, front, dividingNational price | $250–$450/m | $15,500–$27,900 | $31,000–$55,800 | $4,180–$7,520 |
| Frameless glasspoolNational price | $280–$700+/m | $17,050–$43,400+ | $34,100–$86,800+ | $4,590–$11,690+ |
| Aluminium slat / pool fencingpool, front, screen, dividingVIC median of fencers’ prices | $350–$510/m | $21,700–$31,620 | $43,400–$63,240 | $5,850–$8,520 |
| Wrought iron / cast ironfrontNational price | $450–$1,000/m | $27,900–$62,000 | $55,800–$124,000 | $7,520–$16,700 |
| Brick, stone or rendered masonryfront, dividingNational price | $500–$1,200+/m | $31,000–$74,400+ | $62,000–$148,800+ | $8,350–$20,040+ |
| Sandstone and timberfrontNational price | $800–$1,200/m | $49,600–$74,400 | $99,200–$148,800 | $13,360–$20,040 |
Rows marked National price use the national range because we have fewer than 2 local fencer prices for that type. See published prices.
Old fence removal and disposal usually adds $20–$40 per metre, typically about $30. That’s around 20% of a typical Colorbond or paling price (usually 15–25%).
Rocky or hard ground usually adds $15–$45 per metre, typically about $25. That’s around 15% of a typical Colorbond or paling rate (usually 10–25%). Very hard ground sits at the high end.
A plinth or sleeper under the fence, for a small level change or to close the gap at the bottom, usually adds $10–$30 per metre, typically about $20.
Slopes, retaining, trees and tight access are confirmed by your fencer. Extras are calculated separately and do not compound.
Frankston fence rules · Read the full rules
A treated pine paling fence is $140–$150/m. Your typical 50/50 share for 124 m is $8,930–$9,420.
Neighbours usually split a sufficient dividing fence 50/50. If you want something better, you pay the difference.
Up to 1.5 m within 3 m of the street (2 m on a declared main road), unless your planning zone sets a lower limit, sometimes 1.2 m.
Yes. Removal is an optional per-metre extra. The fencer confirms the final cost and any licensed asbestos work.
Block-size source: Vicmap Property, Vicmap Admin and road casements © Department of Transport and Planning, CC BY 4.0. Last updated 17 Nov 2026. Cadastre: Vicmap © Department of Transport and Planning (Vic), NSW Spatial Services, Queensland Government (QSpatial), theLIST © State of Tasmania and ACTmapi, used under CC BY 4.0. SA, WA and NT block sizes are typical-block assumptions.
Your typical 50/50 share in Langwarrin South is $8,930–$9,420.