Work out your fence
The block size is the median of 3,609 house lots in Frankston South. The metres are an estimate; change them to match your property.
Frankston South 3199 · Frankston · Victoria
A standard fence costs $140–$150/m installed. Your half of a typical dividing fence is about $6,840–$7,220.
Your 50/50 share · treated pine paling
$6,840–$7,220
95 m on a typical block · Wider-area fencers’ prices (4 fencers)
The block size is the median of 3,609 house lots in Frankston South. The metres are an estimate; change them to match your property.
| Fence | Per metre | Your share | Whole fence | Front fence |
|---|---|---|---|---|
| Treated pine palingMost commondividing, frontWider-area fencers’ prices (4 fencers) | $140–$150/m | $6,840–$7,220 | $13,680–$14,440 | $2,710–$2,860 |
| Colorbond steeldividing, frontWider-area fencers’ prices (3 fencers) | $170–$180/m | $7,980–$8,410 | $15,960–$16,820 | $3,160–$3,330 |
| Chain wire / chain linkdividingNational price | $30–$150/m | $1,430–$7,130 | $2,850–$14,250 | $560–$2,820 |
| PVC / vinylfront, dividingNational price | $40–$90/m | $1,900–$4,280 | $3,800–$8,550 | $750–$1,690 |
| Timber picketfrontNational price | $60–$350/m | $2,760–$16,630 | $5,510–$33,250 | $1,090–$6,580 |
| Hardwood paling / lapped and cappeddividing, frontNational price | $80–$220/m | $3,800–$10,450 | $7,600–$20,900 | $1,500–$4,140 |
| Tubular metalfront, poolNational price | $180–$350/m | $8,550–$16,630 | $17,100–$33,250 | $3,380–$6,580 |
| Semi-frameless glasspool, frontNational price | $200–$280/m | $9,500–$13,060 | $19,000–$26,130 | $3,760–$5,170 |
| Timber slat / horizontal slat screenscreen, front, dividingNational price | $250–$450/m | $11,880–$21,380 | $23,750–$42,750 | $4,700–$8,460 |
| Frameless glasspoolNational price | $280–$700+/m | $13,060–$33,250+ | $26,130–$66,500+ | $5,170–$13,160+ |
| Aluminium slat / pool fencingpool, front, screen, dividingVIC median of fencers’ prices | $350–$510/m | $16,630–$24,230 | $33,250–$48,450 | $6,580–$9,590 |
| Wrought iron / cast ironfrontNational price | $450–$1,000/m | $21,380–$47,500 | $42,750–$95,000 | $8,460–$18,800 |
| Brick, stone or rendered masonryfront, dividingNational price | $500–$1,200+/m | $23,750–$57,000+ | $47,500–$114,000+ | $9,400–$22,560+ |
| Sandstone and timberfrontNational price | $800–$1,200/m | $38,000–$57,000 | $76,000–$114,000 | $15,040–$22,560 |
Rows marked National price use the national range because we have fewer than 2 local fencer prices for that type. See published prices.
Old fence removal and disposal usually adds $20–$40 per metre, typically about $30. That’s around 20% of a typical Colorbond or paling price (usually 15–25%).
Rocky or hard ground usually adds $15–$45 per metre, typically about $25. That’s around 15% of a typical Colorbond or paling rate (usually 10–25%). Very hard ground sits at the high end.
A plinth or sleeper under the fence, for a small level change or to close the gap at the bottom, usually adds $10–$30 per metre, typically about $20.
Slopes, retaining, trees and tight access are confirmed by your fencer. Extras are calculated separately and do not compound.
Frankston fence rules · Read the full rules
A treated pine paling fence is $140–$150/m. Your typical 50/50 share for 95 m is $6,840–$7,220.
Neighbours usually split a sufficient dividing fence 50/50. If you want something better, you pay the difference.
Up to 1.5 m within 3 m of the street (2 m on a declared main road), unless your planning zone sets a lower limit, sometimes 1.2 m.
Yes. Removal is an optional per-metre extra. The fencer confirms the final cost and any licensed asbestos work.
Block-size source: Vicmap Property, Vicmap Admin and road casements © Department of Transport and Planning, CC BY 4.0. Last updated 17 Nov 2026. Cadastre: Vicmap © Department of Transport and Planning (Vic), NSW Spatial Services, Queensland Government (QSpatial), theLIST © State of Tasmania and ACTmapi, used under CC BY 4.0. SA, WA and NT block sizes are typical-block assumptions.
Your typical 50/50 share in Frankston South is $6,840–$7,220.