Work out your fence
The block size is the median of 3 house lots in Kilmore East. The metres are an estimate; change them to match your property.
Kilmore East 3764 · Mitchell · Victoria
A standard fence costs $110–$160/m installed. Your half of a typical dividing fence is about $6,450–$9,300.
Your 50/50 share · treated pine paling
$6,450–$9,300
116.2 m on a typical block · Wider-area fencers’ prices (7 fencers)
The block size is the median of 3 house lots in Kilmore East. The metres are an estimate; change them to match your property.
| Fence | Per metre | Your share | Whole fence | Front fence |
|---|---|---|---|---|
| Treated pine palingMost commondividing, frontWider-area fencers’ prices (7 fencers) | $110–$160/m | $6,450–$9,300 | $12,900–$18,590 | $2,080–$2,990 |
| Colorbond steeldividing, frontWider-area fencers’ prices (8 fencers) | $120–$180/m | $6,910–$10,630 | $13,830–$21,260 | $2,230–$3,420 |
| Chain wire / chain linkdividingNational price | $30–$150/m | $1,740–$8,720 | $3,490–$17,430 | $560–$2,810 |
| PVC / vinylfront, dividingNational price | $40–$90/m | $2,320–$5,230 | $4,650–$10,460 | $750–$1,680 |
| Timber picketfrontNational price | $60–$350/m | $3,370–$20,340 | $6,740–$40,670 | $1,080–$6,550 |
| Hardwood paling / lapped and cappeddividing, frontNational price | $80–$220/m | $4,650–$12,780 | $9,300–$25,560 | $1,500–$4,110 |
| Tubular metalfront, poolNational price | $180–$350/m | $10,460–$20,340 | $20,920–$40,670 | $3,370–$6,550 |
| Semi-frameless glasspool, frontNational price | $200–$280/m | $11,620–$15,980 | $23,240–$31,960 | $3,740–$5,140 |
| Timber slat / horizontal slat screenscreen, front, dividingNational price | $250–$450/m | $14,530–$26,150 | $29,050–$52,290 | $4,680–$8,420 |
| Frameless glasspoolNational price | $280–$700+/m | $15,980–$40,670+ | $31,960–$81,340+ | $5,140–$13,090+ |
| Aluminium slat / pool fencingpool, front, screen, dividingWider-area fencers’ prices (4 fencers) | $310–$590/m | $18,190–$34,400 | $36,370–$68,790 | $5,850–$11,070 |
| Wrought iron / cast ironfrontNational price | $450–$1,000/m | $26,150–$58,100 | $52,290–$116,200 | $8,420–$18,700 |
| Brick, stone or rendered masonryfront, dividingNational price | $500–$1,200+/m | $29,050–$69,720+ | $58,100–$139,440+ | $9,350–$22,440+ |
| Sandstone and timberfrontNational price | $800–$1,200/m | $46,480–$69,720 | $92,960–$139,440 | $14,960–$22,440 |
Rows marked National price use the national range because we have fewer than 2 local fencer prices for that type. See published prices.
Old fence removal and disposal usually adds $20–$40 per metre, typically about $30. That’s around 20% of a typical Colorbond or paling price (usually 15–25%).
Rocky or hard ground usually adds $15–$45 per metre, typically about $25. That’s around 15% of a typical Colorbond or paling rate (usually 10–25%). Very hard ground sits at the high end.
A plinth or sleeper under the fence, for a small level change or to close the gap at the bottom, usually adds $10–$30 per metre, typically about $20.
Slopes, retaining, trees and tight access are confirmed by your fencer. Extras are calculated separately and do not compound.
Mitchell fence rules · Read the full rules
We’ve checked some of Mitchell’s pages, not all. Where there’s no council rule on file we show the Victoria rule. Check with council before you build.
A treated pine paling fence is $110–$160/m. Your typical 50/50 share for 116.2 m is $6,450–$9,300.
Neighbours usually split a sufficient dividing fence 50/50. If you want something better, you pay the difference.
Up to 1.5 m within 3 m of the street (2 m on a declared main road), unless your planning zone sets a lower limit, sometimes 1.2 m.
Yes. Removal is an optional per-metre extra. The fencer confirms the final cost and any licensed asbestos work.
Block-size source: Vicmap Property, Vicmap Admin and road casements © Department of Transport and Planning, CC BY 4.0. Last updated 17 Nov 2026. Cadastre: Vicmap © Department of Transport and Planning (Vic), NSW Spatial Services, Queensland Government (QSpatial), theLIST © State of Tasmania and ACTmapi, used under CC BY 4.0. SA, WA and NT block sizes are typical-block assumptions.
Your typical 50/50 share in Kilmore East is $6,450–$9,300.