Work out your fence
The block size is Median of 2298 house lots in Seymour. The metres are an estimate; change them to match your property.
Seymour 3660 · Mitchell · Victoria
A standard fence costs $110–$160/m installed. Your half of a typical dividing fence is about $5,280–$7,620.
Your 50/50 share · treated pine paling
$5,280–$7,620
95.2 m on a typical block · Wider-area fencers’ prices (7 fencers)
The block size is Median of 2298 house lots in Seymour. The metres are an estimate; change them to match your property.
| Fence | Price per metre | Your 50/50 share | Whole dividing fence | Front fence |
|---|---|---|---|---|
| Treated pine palingMost commondividing, frontWider-area fencers’ prices (7 fencers) | $110–$160/m | $5,280–$7,620 | $10,570–$15,230 | $2,050–$2,960 |
| Colorbond steeldividing, frontWider-area fencers’ prices (8 fencers) | $120–$180/m | $5,660–$8,710 | $11,330–$17,420 | $2,200–$3,390 |
| Chain wire / chain linkdividingNational range (few local prices yet) | $30–$150/m | $1,430–$7,140 | $2,860–$14,280 | $560–$2,780 |
| PVC / vinylfront, dividingNational range (few local prices yet) | $40–$90/m | $1,900–$4,280 | $3,810–$8,570 | $740–$1,670 |
| Timber picketfrontNational range (few local prices yet) | $60–$350/m | $2,760–$16,660 | $5,520–$33,320 | $1,070–$6,480 |
| Hardwood paling / lapped and cappeddividing, frontNational range (few local prices yet) | $80–$220/m | $3,810–$10,470 | $7,620–$20,940 | $1,480–$4,070 |
| Tubular metalfront, poolNational range (few local prices yet) | $180–$350/m | $8,570–$16,660 | $17,140–$33,320 | $3,330–$6,480 |
| Semi-frameless glasspool, frontNational range (few local prices yet) | $200–$280/m | $9,520–$13,090 | $19,040–$26,180 | $3,700–$5,090 |
| Timber slat / horizontal slat screenscreen, front, dividingNational range (few local prices yet) | $250–$450/m | $11,900–$21,420 | $23,800–$42,840 | $4,630–$8,330 |
| Frameless glasspoolNational range (few local prices yet) | $280–$700+/m | $13,090–$33,320+ | $26,180–$66,640+ | $5,090–$12,950+ |
| Aluminium slat / pool fencingpool, front, screen, dividingWider-area fencers’ prices (4 fencers) | $310–$590/m | $14,900–$28,180 | $29,800–$56,360 | $5,790–$10,950 |
| Wrought iron / cast ironfrontNational range (few local prices yet) | $450–$1,000/m | $21,420–$47,600 | $42,840–$95,200 | $8,330–$18,500 |
| Brick, stone or rendered masonryfront, dividingNational range (few local prices yet) | $500–$1,200+/m | $23,800–$57,120+ | $47,600–$114,240+ | $9,250–$22,200+ |
| Sandstone and timberfrontNational range (few local prices yet) | $800–$1,200/m | $38,080–$57,120 | $76,160–$114,240 | $14,800–$22,200 |
Grey price-source rows use a state or national fallback. A national range is indicative and may have few local prices.
Old fence removal and disposal usually adds $20–$40 per metre, typically about $30. That’s around 20% of a typical Colorbond or paling price (usually 15–25%).
Rocky or hard ground usually adds $15–$45 per metre, typically about $25. That’s around 15% of a typical Colorbond or paling rate (usually 10–25%). Very hard ground sits at the high end.
A plinth or sleeper under the fence, for a small level change or to close the gap at the bottom, usually adds $10–$30 per metre, typically about $20.
Slopes, retaining, trees and tight access are confirmed by your fencer. Extras are calculated separately and do not compound.
Mitchell fence rules · Read the full rules
We’ve checked some of Mitchell’s pages, not all. Where there’s no council rule on file we show the Victoria rule. Check with council before you build.
A treated pine paling fence is $110–$160/m. Your typical 50/50 share for 95.2 m is $5,280–$7,620.
Neighbours usually split a sufficient dividing fence 50/50. If you want something better, you pay the difference.
Up to 1.5 m within 3 m of the street (2 m on a declared main road), unless your planning zone sets a lower limit, sometimes 1.2 m.
Yes. Removal is an optional per-metre extra. The fencer confirms the final cost and any licensed asbestos work.
Block-size source: Vicmap Property, Vicmap Admin and road casements © Department of Transport and Planning, CC BY 4.0. Last updated 17 Nov 2026. Cadastre: Vicmap © Department of Transport and Planning (Vic), NSW Spatial Services, Queensland Government (QSpatial), theLIST © State of Tasmania and ACTmapi, used under CC BY 4.0. SA, WA and NT block sizes are typical-block assumptions.
Your typical 50/50 share in Seymour is $5,280–$7,620.
| Fencer | Fence | Height | Published rate | Source |
|---|---|---|---|---|
| No local source rows are published yet. | ||||
Price research is available in how we price.