Work out your fence
The block size is Median of 2 house lots in Fern Hill. The metres are an estimate; change them to match your property.
Fern Hill 3458 · Hepburn · Victoria
A standard fence costs $120–$150/m installed. Your half of a typical dividing fence is about $4,510–$5,840.
Your 50/50 share · treated pine paling
$4,510–$5,840
75.8 m on a typical block · VIC median of fencers’ prices
The block size is Median of 2 house lots in Fern Hill. The metres are an estimate; change them to match your property.
| Fence | Price per metre | Your 50/50 share | Whole dividing fence | Front fence |
|---|---|---|---|---|
| Treated pine palingMost commondividing, frontVIC median of fencers’ prices | $120–$150/m | $4,510–$5,840 | $9,020–$11,670 | $2,330–$3,020 |
| Colorbond steeldividing, frontVIC median of fencers’ prices | $140–$180/m | $5,190–$6,710 | $10,380–$13,420 | $2,690–$3,470 |
| Chain wire / chain linkdividingNational range (few local prices yet) | $30–$150/m | $1,140–$5,690 | $2,270–$11,370 | $590–$2,940 |
| PVC / vinylfront, dividingNational range (few local prices yet) | $40–$90/m | $1,520–$3,410 | $3,030–$6,820 | $780–$1,760 |
| Timber picketfrontNational range (few local prices yet) | $60–$350/m | $2,200–$13,270 | $4,400–$26,530 | $1,140–$6,860 |
| Hardwood paling / lapped and cappeddividing, frontNational range (few local prices yet) | $80–$220/m | $3,030–$8,340 | $6,060–$16,680 | $1,570–$4,310 |
| Tubular metalfront, poolNational range (few local prices yet) | $180–$350/m | $6,820–$13,270 | $13,640–$26,530 | $3,530–$6,860 |
| Semi-frameless glasspool, frontNational range (few local prices yet) | $200–$280/m | $7,580–$10,420 | $15,160–$20,850 | $3,920–$5,390 |
| Timber slat / horizontal slat screenscreen, front, dividingNational range (few local prices yet) | $250–$450/m | $9,480–$17,060 | $18,950–$34,110 | $4,900–$8,820 |
| Frameless glasspoolNational range (few local prices yet) | $280–$700+/m | $10,420–$26,530+ | $20,850–$53,060+ | $5,390–$13,720+ |
| Aluminium slat / pool fencingpool, front, screen, dividingVIC median of fencers’ prices | $350–$510/m | $13,270–$19,330 | $26,530–$38,660 | $6,860–$10,000 |
| Wrought iron / cast ironfrontNational range (few local prices yet) | $450–$1,000/m | $17,060–$37,900 | $34,110–$75,800 | $8,820–$19,600 |
| Brick, stone or rendered masonryfront, dividingNational range (few local prices yet) | $500–$1,200+/m | $18,950–$45,480+ | $37,900–$90,960+ | $9,800–$23,520+ |
| Sandstone and timberfrontNational range (few local prices yet) | $800–$1,200/m | $30,320–$45,480 | $60,640–$90,960 | $15,680–$23,520 |
Grey price-source rows use a state or national fallback. A national range is indicative and may have few local prices.
Old fence removal and disposal usually adds $20–$40 per metre, typically about $30. That’s around 20% of a typical Colorbond or paling price (usually 15–25%).
Rocky or hard ground usually adds $15–$45 per metre, typically about $25. That’s around 15% of a typical Colorbond or paling rate (usually 10–25%). Very hard ground sits at the high end.
A plinth or sleeper under the fence, for a small level change or to close the gap at the bottom, usually adds $10–$30 per metre, typically about $20.
Slopes, retaining, trees and tight access are confirmed by your fencer. Extras are calculated separately and do not compound.
Hepburn fence rules · Read the full rules
A treated pine paling fence is $120–$150/m. Your typical 50/50 share for 75.8 m is $4,510–$5,840.
Neighbours usually split a sufficient dividing fence 50/50. If you want something better, you pay the difference.
Up to 1.5 m within 3 m of the street (2 m on a declared main road), unless your planning zone sets a lower limit, sometimes 1.2 m.
Yes. Removal is an optional per-metre extra. The fencer confirms the final cost and any licensed asbestos work.
Block-size source: Vicmap Property, Vicmap Admin and road casements © Department of Transport and Planning, CC BY 4.0. Last updated 17 Nov 2026. Cadastre: Vicmap © Department of Transport and Planning (Vic), NSW Spatial Services, Queensland Government (QSpatial), theLIST © State of Tasmania and ACTmapi, used under CC BY 4.0. SA, WA and NT block sizes are typical-block assumptions.
Your typical 50/50 share in Fern Hill is $4,510–$5,840.
| Fencer | Fence | Height | Published rate | Source |
|---|---|---|---|---|
| No local source rows are published yet. | ||||
Price research is available in how we price.