Work out your fence
The block size is Median of 6 house lots in Dunnstown. The metres are an estimate; change them to match your property.
Dunnstown 3352 · Moorabool · Victoria
A standard fence costs $120–$150/m installed. Your half of a typical dividing fence is about $5,210–$6,750.
Your 50/50 share · treated pine paling
$5,210–$6,750
87.6 m on a typical block · VIC median of fencers’ prices
The block size is Median of 6 house lots in Dunnstown. The metres are an estimate; change them to match your property.
| Fence | Price per metre | Your 50/50 share | Whole dividing fence | Front fence |
|---|---|---|---|---|
| Treated pine palingMost commondividing, frontVIC median of fencers’ prices | $120–$150/m | $5,210–$6,750 | $10,420–$13,490 | $2,340–$3,030 |
| Colorbond steeldividing, frontVIC median of fencers’ prices | $140–$180/m | $6,000–$7,750 | $12,000–$15,510 | $2,700–$3,490 |
| Chain wire / chain linkdividingNational range (few local prices yet) | $30–$150/m | $1,310–$6,570 | $2,630–$13,140 | $590–$2,960 |
| PVC / vinylfront, dividingNational range (few local prices yet) | $40–$90/m | $1,750–$3,940 | $3,500–$7,880 | $790–$1,770 |
| Timber picketfrontNational range (few local prices yet) | $60–$350/m | $2,540–$15,330 | $5,080–$30,660 | $1,140–$6,900 |
| Hardwood paling / lapped and cappeddividing, frontNational range (few local prices yet) | $80–$220/m | $3,500–$9,640 | $7,010–$19,270 | $1,580–$4,330 |
| Tubular metalfront, poolNational range (few local prices yet) | $180–$350/m | $7,880–$15,330 | $15,770–$30,660 | $3,550–$6,900 |
| Semi-frameless glasspool, frontNational range (few local prices yet) | $200–$280/m | $8,760–$12,050 | $17,520–$24,090 | $3,940–$5,420 |
| Timber slat / horizontal slat screenscreen, front, dividingNational range (few local prices yet) | $250–$450/m | $10,950–$19,710 | $21,900–$39,420 | $4,930–$8,870 |
| Frameless glasspoolNational range (few local prices yet) | $280–$700+/m | $12,050–$30,660+ | $24,090–$61,320+ | $5,420–$13,790+ |
| Aluminium slat / pool fencingpool, front, screen, dividingVIC median of fencers’ prices | $350–$510/m | $15,330–$22,340 | $30,660–$44,680 | $6,900–$10,050 |
| Wrought iron / cast ironfrontNational range (few local prices yet) | $450–$1,000/m | $19,710–$43,800 | $39,420–$87,600 | $8,870–$19,700 |
| Brick, stone or rendered masonryfront, dividingNational range (few local prices yet) | $500–$1,200+/m | $21,900–$52,560+ | $43,800–$105,120+ | $9,850–$23,640+ |
| Sandstone and timberfrontNational range (few local prices yet) | $800–$1,200/m | $35,040–$52,560 | $70,080–$105,120 | $15,760–$23,640 |
Grey price-source rows use a state or national fallback. A national range is indicative and may have few local prices.
Old fence removal and disposal usually adds $20–$40 per metre, typically about $30. That’s around 20% of a typical Colorbond or paling price (usually 15–25%).
Rocky or hard ground usually adds $15–$45 per metre, typically about $25. That’s around 15% of a typical Colorbond or paling rate (usually 10–25%). Very hard ground sits at the high end.
A plinth or sleeper under the fence, for a small level change or to close the gap at the bottom, usually adds $10–$30 per metre, typically about $20.
Slopes, retaining, trees and tight access are confirmed by your fencer. Extras are calculated separately and do not compound.
Moorabool fence rules · Read the full rules
A treated pine paling fence is $120–$150/m. Your typical 50/50 share for 87.6 m is $5,210–$6,750.
Neighbours usually split a sufficient dividing fence 50/50. If you want something better, you pay the difference.
Up to 1.5 m within 3 m of the street (2 m on a declared main road), unless your planning zone sets a lower limit, sometimes 1.2 m.
Yes. Removal is an optional per-metre extra. The fencer confirms the final cost and any licensed asbestos work.
Block-size source: Vicmap Property, Vicmap Admin and road casements © Department of Transport and Planning, CC BY 4.0. Last updated 17 Nov 2026. Cadastre: Vicmap © Department of Transport and Planning (Vic), NSW Spatial Services, Queensland Government (QSpatial), theLIST © State of Tasmania and ACTmapi, used under CC BY 4.0. SA, WA and NT block sizes are typical-block assumptions.
Your typical 50/50 share in Dunnstown is $5,210–$6,750.
| Fencer | Fence | Height | Published rate | Source |
|---|---|---|---|---|
| No local source rows are published yet. | ||||
Price research is available in how we price.