Work out your fence
The block size is the median of 43 house lots in Blackwood. The metres are an estimate; change them to match your property.
Blackwood 3458 · Moorabool · Victoria
A standard fence costs $120–$150/m installed. Your half of a typical dividing fence is about $6,350–$8,220.
Your 50/50 share · treated pine paling
$6,350–$8,220
106.8 m on a typical block · VIC median of fencers’ prices
The block size is the median of 43 house lots in Blackwood. The metres are an estimate; change them to match your property.
| Fence | Per metre | Your share | Whole fence | Front fence |
|---|---|---|---|---|
| Treated pine palingMost commondividing, frontVIC median of fencers’ prices | $120–$150/m | $6,350–$8,220 | $12,710–$16,450 | $2,630–$3,400 |
| Colorbond steeldividing, frontVIC median of fencers’ prices | $140–$180/m | $7,320–$9,450 | $14,630–$18,900 | $3,030–$3,910 |
| Chain wire / chain linkdividingNational price | $30–$150/m | $1,600–$8,010 | $3,200–$16,020 | $660–$3,320 |
| PVC / vinylfront, dividingNational price | $40–$90/m | $2,140–$4,810 | $4,270–$9,610 | $880–$1,990 |
| Timber picketfrontNational price | $60–$350/m | $3,100–$18,690 | $6,190–$37,380 | $1,280–$7,740 |
| Hardwood paling / lapped and cappeddividing, frontNational price | $80–$220/m | $4,270–$11,750 | $8,540–$23,500 | $1,770–$4,860 |
| Tubular metalfront, poolNational price | $180–$350/m | $9,610–$18,690 | $19,220–$37,380 | $3,980–$7,740 |
| Semi-frameless glasspool, frontNational price | $200–$280/m | $10,680–$14,690 | $21,360–$29,370 | $4,420–$6,080 |
| Timber slat / horizontal slat screenscreen, front, dividingNational price | $250–$450/m | $13,350–$24,030 | $26,700–$48,060 | $5,530–$9,950 |
| Frameless glasspoolNational price | $280–$700+/m | $14,690–$37,380+ | $29,370–$74,760+ | $6,080–$15,470+ |
| Aluminium slat / pool fencingpool, front, screen, dividingVIC median of fencers’ prices | $350–$510/m | $18,690–$27,230 | $37,380–$54,470 | $7,740–$11,270 |
| Wrought iron / cast ironfrontNational price | $450–$1,000/m | $24,030–$53,400 | $48,060–$106,800 | $9,950–$22,100 |
| Brick, stone or rendered masonryfront, dividingNational price | $500–$1,200+/m | $26,700–$64,080+ | $53,400–$128,160+ | $11,050–$26,520+ |
| Sandstone and timberfrontNational price | $800–$1,200/m | $42,720–$64,080 | $85,440–$128,160 | $17,680–$26,520 |
Rows marked National price use the national range because we have fewer than 2 local fencer prices for that type. See published prices.
Old fence removal and disposal usually adds $20–$40 per metre, typically about $30. That’s around 20% of a typical Colorbond or paling price (usually 15–25%).
Rocky or hard ground usually adds $15–$45 per metre, typically about $25. That’s around 15% of a typical Colorbond or paling rate (usually 10–25%). Very hard ground sits at the high end.
A plinth or sleeper under the fence, for a small level change or to close the gap at the bottom, usually adds $10–$30 per metre, typically about $20.
Slopes, retaining, trees and tight access are confirmed by your fencer. Extras are calculated separately and do not compound.
Moorabool fence rules · Read the full rules
A treated pine paling fence is $120–$150/m. Your typical 50/50 share for 106.8 m is $6,350–$8,220.
Neighbours usually split a sufficient dividing fence 50/50. If you want something better, you pay the difference.
Up to 1.5 m within 3 m of the street (2 m on a declared main road), unless your planning zone sets a lower limit, sometimes 1.2 m.
Yes. Removal is an optional per-metre extra. The fencer confirms the final cost and any licensed asbestos work.
Block-size source: Vicmap Property, Vicmap Admin and road casements © Department of Transport and Planning, CC BY 4.0. Last updated 17 Nov 2026. Cadastre: Vicmap © Department of Transport and Planning (Vic), NSW Spatial Services, Queensland Government (QSpatial), theLIST © State of Tasmania and ACTmapi, used under CC BY 4.0. SA, WA and NT block sizes are typical-block assumptions.
Your typical 50/50 share in Blackwood is $6,350–$8,220.