Work out your fence
The block size is Median of 2 house lots in Dean. The metres are an estimate; change them to match your property.
Dean 3363 · Hepburn · Victoria
A standard fence costs $120–$150/m installed. Your half of a typical dividing fence is about $5,160–$6,680.
Your 50/50 share · treated pine paling
$5,160–$6,680
86.8 m on a typical block · VIC median of fencers’ prices
The block size is Median of 2 house lots in Dean. The metres are an estimate; change them to match your property.
| Fence | Price per metre | Your 50/50 share | Whole dividing fence | Front fence |
|---|---|---|---|---|
| Treated pine palingMost commondividing, frontVIC median of fencers’ prices | $120–$150/m | $5,160–$6,680 | $10,330–$13,370 | $2,280–$2,960 |
| Colorbond steeldividing, frontVIC median of fencers’ prices | $140–$180/m | $5,950–$7,680 | $11,890–$15,360 | $2,630–$3,400 |
| Chain wire / chain linkdividingNational range (few local prices yet) | $30–$150/m | $1,300–$6,510 | $2,600–$13,020 | $580–$2,880 |
| PVC / vinylfront, dividingNational range (few local prices yet) | $40–$90/m | $1,740–$3,910 | $3,470–$7,810 | $770–$1,730 |
| Timber picketfrontNational range (few local prices yet) | $60–$350/m | $2,520–$15,190 | $5,030–$30,380 | $1,110–$6,720 |
| Hardwood paling / lapped and cappeddividing, frontNational range (few local prices yet) | $80–$220/m | $3,470–$9,550 | $6,940–$19,100 | $1,540–$4,220 |
| Tubular metalfront, poolNational range (few local prices yet) | $180–$350/m | $7,810–$15,190 | $15,620–$30,380 | $3,460–$6,720 |
| Semi-frameless glasspool, frontNational range (few local prices yet) | $200–$280/m | $8,680–$11,940 | $17,360–$23,870 | $3,840–$5,280 |
| Timber slat / horizontal slat screenscreen, front, dividingNational range (few local prices yet) | $250–$450/m | $10,850–$19,530 | $21,700–$39,060 | $4,800–$8,640 |
| Frameless glasspoolNational range (few local prices yet) | $280–$700+/m | $11,940–$30,380+ | $23,870–$60,760+ | $5,280–$13,440+ |
| Aluminium slat / pool fencingpool, front, screen, dividingVIC median of fencers’ prices | $350–$510/m | $15,190–$22,130 | $30,380–$44,270 | $6,720–$9,790 |
| Wrought iron / cast ironfrontNational range (few local prices yet) | $450–$1,000/m | $19,530–$43,400 | $39,060–$86,800 | $8,640–$19,200 |
| Brick, stone or rendered masonryfront, dividingNational range (few local prices yet) | $500–$1,200+/m | $21,700–$52,080+ | $43,400–$104,160+ | $9,600–$23,040+ |
| Sandstone and timberfrontNational range (few local prices yet) | $800–$1,200/m | $34,720–$52,080 | $69,440–$104,160 | $15,360–$23,040 |
Grey price-source rows use a state or national fallback. A national range is indicative and may have few local prices.
Old fence removal and disposal usually adds $20–$40 per metre, typically about $30. That’s around 20% of a typical Colorbond or paling price (usually 15–25%).
Rocky or hard ground usually adds $15–$45 per metre, typically about $25. That’s around 15% of a typical Colorbond or paling rate (usually 10–25%). Very hard ground sits at the high end.
A plinth or sleeper under the fence, for a small level change or to close the gap at the bottom, usually adds $10–$30 per metre, typically about $20.
Slopes, retaining, trees and tight access are confirmed by your fencer. Extras are calculated separately and do not compound.
Hepburn fence rules · Read the full rules
A treated pine paling fence is $120–$150/m. Your typical 50/50 share for 86.8 m is $5,160–$6,680.
Neighbours usually split a sufficient dividing fence 50/50. If you want something better, you pay the difference.
Up to 1.5 m within 3 m of the street (2 m on a declared main road), unless your planning zone sets a lower limit, sometimes 1.2 m.
Yes. Removal is an optional per-metre extra. The fencer confirms the final cost and any licensed asbestos work.
Block-size source: Vicmap Property, Vicmap Admin and road casements © Department of Transport and Planning, CC BY 4.0. Last updated 17 Nov 2026. Cadastre: Vicmap © Department of Transport and Planning (Vic), NSW Spatial Services, Queensland Government (QSpatial), theLIST © State of Tasmania and ACTmapi, used under CC BY 4.0. SA, WA and NT block sizes are typical-block assumptions.
Your typical 50/50 share in Dean is $5,160–$6,680.
| Fencer | Fence | Height | Published rate | Source |
|---|---|---|---|---|
| No local source rows are published yet. | ||||
Price research is available in how we price.