Work out your fence
The block size is the median of 3,170 house lots in Blackburn South. The metres are an estimate; change them to match your property.
Blackburn South 3130 · Whitehorse · Victoria
A standard fence costs $140–$150/m installed. Your half of a typical dividing fence is about $6,500–$6,860.
Your 50/50 share · treated pine paling
$6,500–$6,860
90.3 m on a typical block · Wider-area fencers’ prices (4 fencers)
The block size is the median of 3,170 house lots in Blackburn South. The metres are an estimate; change them to match your property.
| Fence | Per metre | Your share | Whole fence | Front fence |
|---|---|---|---|---|
| Treated pine palingMost commondividing, frontWider-area fencers’ prices (4 fencers) | $140–$150/m | $6,500–$6,860 | $13,000–$13,730 | $2,510–$2,640 |
| Colorbond steeldividing, frontWider-area fencers’ prices (3 fencers) | $170–$180/m | $7,590–$7,990 | $15,170–$15,980 | $2,920–$3,080 |
| Chain wire / chain linkdividingNational price | $30–$150/m | $1,350–$6,770 | $2,710–$13,550 | $520–$2,610 |
| PVC / vinylfront, dividingNational price | $40–$90/m | $1,810–$4,060 | $3,610–$8,130 | $700–$1,570 |
| Timber picketfrontNational price | $60–$350/m | $2,620–$15,800 | $5,240–$31,610 | $1,010–$6,090 |
| Hardwood paling / lapped and cappeddividing, frontNational price | $80–$220/m | $3,610–$9,930 | $7,220–$19,870 | $1,390–$3,830 |
| Tubular metalfront, poolNational price | $180–$350/m | $8,130–$15,800 | $16,250–$31,610 | $3,130–$6,090 |
| Semi-frameless glasspool, frontNational price | $200–$280/m | $9,030–$12,420 | $18,060–$24,830 | $3,480–$4,790 |
| Timber slat / horizontal slat screenscreen, front, dividingNational price | $250–$450/m | $11,290–$20,320 | $22,580–$40,640 | $4,350–$7,830 |
| Frameless glasspoolNational price | $280–$700+/m | $12,420–$31,610+ | $24,830–$63,210+ | $4,790–$12,180+ |
| Aluminium slat / pool fencingpool, front, screen, dividingVIC median of fencers’ prices | $350–$510/m | $15,800–$23,030 | $31,610–$46,050 | $6,090–$8,870 |
| Wrought iron / cast ironfrontNational price | $450–$1,000/m | $20,320–$45,150 | $40,640–$90,300 | $7,830–$17,400 |
| Brick, stone or rendered masonryfront, dividingNational price | $500–$1,200+/m | $22,580–$54,180+ | $45,150–$108,360+ | $8,700–$20,880+ |
| Sandstone and timberfrontNational price | $800–$1,200/m | $36,120–$54,180 | $72,240–$108,360 | $13,920–$20,880 |
Rows marked National price use the national range because we have fewer than 2 local fencer prices for that type. See published prices.
Old fence removal and disposal usually adds $20–$40 per metre, typically about $30. That’s around 20% of a typical Colorbond or paling price (usually 15–25%).
Rocky or hard ground usually adds $15–$45 per metre, typically about $25. That’s around 15% of a typical Colorbond or paling rate (usually 10–25%). Very hard ground sits at the high end.
A plinth or sleeper under the fence, for a small level change or to close the gap at the bottom, usually adds $10–$30 per metre, typically about $20.
Slopes, retaining, trees and tight access are confirmed by your fencer. Extras are calculated separately and do not compound.
Whitehorse fence rules · Read the full rules
A treated pine paling fence is $140–$150/m. Your typical 50/50 share for 90.3 m is $6,500–$6,860.
Neighbours usually split a sufficient dividing fence 50/50. If you want something better, you pay the difference.
Up to 1.5 m within 3 m of the street (2 m on a declared main road), unless your planning zone sets a lower limit, sometimes 1.2 m.
Yes. Removal is an optional per-metre extra. The fencer confirms the final cost and any licensed asbestos work.
Block-size source: Vicmap Property, Vicmap Admin and road casements © Department of Transport and Planning, CC BY 4.0. Last updated 17 Nov 2026. Cadastre: Vicmap © Department of Transport and Planning (Vic), NSW Spatial Services, Queensland Government (QSpatial), theLIST © State of Tasmania and ACTmapi, used under CC BY 4.0. SA, WA and NT block sizes are typical-block assumptions.
Your typical 50/50 share in Blackburn South is $6,500–$6,860.