Victoria · local fence rules · checked 17 Nov 2026

Fence rules in Whitehorse.

Most fences here don’t need council approval: front fences up to 1.5 m and side or rear fences up to 2 m. Neighbours split a dividing fence 50/50.

Who pays for a dividing fence?

Neighbours usually split a sufficient dividing fence 50/50. If you want something better, you pay the difference.

Source: Official source · checked 17 Nov 2026

Front fence height limits

Up to 1.5 m within 3 m of the street (2 m on a declared main road), unless your planning zone sets a lower limit, sometimes 1.2 m.

Source: Official source · checked 17 Nov 2026

When you need approval

Side and rear fences under 2 m, more than 3 m from the front boundary, usually need no building permit. Masonry front fences over 1.2 m often do.

Read the council’s wording
Council page: "Building Permit A front fence is defined as any fence (including side fences) within 3m from the front boundary." "If your front fence is within 3m of the front boundary, call the Building Department on 9262 6303 to determine the front fence height controls for your property and building permit requirements." "Building Permit If you want to exceed the maximum permissible height of 2m for a side or rear boundary fence a Building Permit is required, before any works are undertaken associated with the fence."
Source ↗ · checked 16 Nov 2026
Read the council’s wording
The Whitehorse Planning Scheme applies a Neighbourhood Character Overlay in 1 mapped areas; some schedules control front fence height or style.
Source ↗ · checked 16 Nov 2026

Source: Official source · checked 17 Nov 2026

Pool fence rules

Any pool or spa that can hold more than 30 cm of water needs a compliant barrier and must be registered with council. Barriers are re-inspected every 4 years.

Read the council’s wording
Council page: "All pools and spas must be registered with your local Council."
Source ↗ · checked 16 Nov 2026

Source: Official source · checked 17 Nov 2026

Fences in bushfire-prone areas

About 5% of Whitehorse is a designated Bushfire Prone Area. Building work there needs at least BAL 12.5. The Bushfire Management Overlay also applies in parts, which can trigger a planning permit. Check your address on VicPlan.

Read the council’s wording
The Whitehorse Planning Scheme applies the Bushfire Management Overlay (BMO) to 2 mapped areas. Buildings and works in the BMO generally need a planning permit; fencing materials may be constrained.
Source ↗ · checked 16 Nov 2026
Read the council’s wording
Parts of Whitehorse are a designated Bushfire Prone Area: about 291 ha, roughly 4.5% of the municipality (BPA map LEGL./13-137, gazetted 08/08/2013). Building work in a BPA needs a minimum BAL 12.5 under AS 3959; the BAL is assessed per site.
Source ↗ · checked 16 Nov 2026

Source: Official source · checked 17 Nov 2026

Heritage and character areas

The Whitehorse planning scheme maps 289 Heritage Overlay areas. A planning permit is often needed to build or change a front fence there. A Neighbourhood Character Overlay can also control front fence height or style.

Read the council’s wording
The Whitehorse Planning Scheme has 289 Heritage Overlay areas mapped. In a Heritage Overlay a planning permit is often required to build or change a front fence; check the property and the overlay schedule.
Source ↗ · checked 16 Nov 2026

Source: Official source · checked 17 Nov 2026

What a fence costs in Whitehorse

Mitcham has the most published lot data in Whitehorse.

FencePrice per metreYour 50/50 share
Treated pine paling in Mitcham$140–$150/m
Colorbond steel in Mitcham$170–$180/m

Fence rule FAQs

Do I need council approval for a fence in Whitehorse?

Side and rear fences under 2 m, more than 3 m from the front boundary, usually need no building permit. Masonry front fences over 1.2 m often do.

Who pays for a dividing fence in Whitehorse?

Neighbours usually split a sufficient dividing fence 50/50. If you want something better, you pay the difference.

How high does a pool fence need to be in Whitehorse?

Any pool or spa that can hold more than 30 cm of water needs a compliant barrier and must be registered with council. Barriers are re-inspected every 4 years.

Can I use a timber fence in a bushfire area?

About 5% of Whitehorse is a designated Bushfire Prone Area. Building work there needs at least BAL 12.5. The Bushfire Management Overlay also applies in parts, which can trigger a planning permit. Check your address on VicPlan.

How much does a fence cost in Mitcham?

Treated pine paling is $140–$150/m. Your half of a typical dividing fence is $6,690–$7,060.

Contact Whitehorse

Email [email protected]. Check the council website for current contact details.

Get quotes from Whitehorse fence builders

Compare local quotes with the typical price in Mitcham.

  1. Tell us the suburb, fence and length. It takes about 2 minutes.
  2. We send it to up to 3 local fencers. Free for homeowners.
  3. Compare their quotes with the estimate above. You choose who to hire.
Get up to 3 quotes →

Rule headings use published category labels. Official sources should be checked before building. General information only. These are estimates, not quotes, and not legal, planning, building or financial advice. Check your own title, council and neighbour situation before you build.