Work out your fence
The block size is the median of 2,235 house lots in Blackburn North. The metres are an estimate; change them to match your property.
Blackburn North 3130 · Whitehorse · Victoria
A standard fence costs $140–$150/m installed. Your half of a typical dividing fence is about $6,390–$6,750.
Your 50/50 share · treated pine paling
$6,390–$6,750
88.8 m on a typical block · Wider-area fencers’ prices (4 fencers)
The block size is the median of 2,235 house lots in Blackburn North. The metres are an estimate; change them to match your property.
| Fence | Per metre | Your share | Whole fence | Front fence |
|---|---|---|---|---|
| Treated pine palingMost commondividing, frontWider-area fencers’ prices (4 fencers) | $140–$150/m | $6,390–$6,750 | $12,790–$13,500 | $2,560–$2,710 |
| Colorbond steeldividing, frontWider-area fencers’ prices (3 fencers) | $170–$180/m | $7,460–$7,860 | $14,920–$15,720 | $2,990–$3,150 |
| Chain wire / chain linkdividingNational price | $30–$150/m | $1,330–$6,660 | $2,660–$13,320 | $530–$2,670 |
| PVC / vinylfront, dividingNational price | $40–$90/m | $1,780–$4,000 | $3,550–$7,990 | $710–$1,600 |
| Timber picketfrontNational price | $60–$350/m | $2,580–$15,540 | $5,150–$31,080 | $1,030–$6,230 |
| Hardwood paling / lapped and cappeddividing, frontNational price | $80–$220/m | $3,550–$9,770 | $7,100–$19,540 | $1,420–$3,920 |
| Tubular metalfront, poolNational price | $180–$350/m | $7,990–$15,540 | $15,980–$31,080 | $3,200–$6,230 |
| Semi-frameless glasspool, frontNational price | $200–$280/m | $8,880–$12,210 | $17,760–$24,420 | $3,560–$4,900 |
| Timber slat / horizontal slat screenscreen, front, dividingNational price | $250–$450/m | $11,100–$19,980 | $22,200–$39,960 | $4,450–$8,010 |
| Frameless glasspoolNational price | $280–$700+/m | $12,210–$31,080+ | $24,420–$62,160+ | $4,900–$12,460+ |
| Aluminium slat / pool fencingpool, front, screen, dividingVIC median of fencers’ prices | $350–$510/m | $15,540–$22,640 | $31,080–$45,290 | $6,230–$9,080 |
| Wrought iron / cast ironfrontNational price | $450–$1,000/m | $19,980–$44,400 | $39,960–$88,800 | $8,010–$17,800 |
| Brick, stone or rendered masonryfront, dividingNational price | $500–$1,200+/m | $22,200–$53,280+ | $44,400–$106,560+ | $8,900–$21,360+ |
| Sandstone and timberfrontNational price | $800–$1,200/m | $35,520–$53,280 | $71,040–$106,560 | $14,240–$21,360 |
Rows marked National price use the national range because we have fewer than 2 local fencer prices for that type. See published prices.
Old fence removal and disposal usually adds $20–$40 per metre, typically about $30. That’s around 20% of a typical Colorbond or paling price (usually 15–25%).
Rocky or hard ground usually adds $15–$45 per metre, typically about $25. That’s around 15% of a typical Colorbond or paling rate (usually 10–25%). Very hard ground sits at the high end.
A plinth or sleeper under the fence, for a small level change or to close the gap at the bottom, usually adds $10–$30 per metre, typically about $20.
Slopes, retaining, trees and tight access are confirmed by your fencer. Extras are calculated separately and do not compound.
Whitehorse fence rules · Read the full rules
A treated pine paling fence is $140–$150/m. Your typical 50/50 share for 88.8 m is $6,390–$6,750.
Neighbours usually split a sufficient dividing fence 50/50. If you want something better, you pay the difference.
Up to 1.5 m within 3 m of the street (2 m on a declared main road), unless your planning zone sets a lower limit, sometimes 1.2 m.
Yes. Removal is an optional per-metre extra. The fencer confirms the final cost and any licensed asbestos work.
Block-size source: Vicmap Property, Vicmap Admin and road casements © Department of Transport and Planning, CC BY 4.0. Last updated 17 Nov 2026. Cadastre: Vicmap © Department of Transport and Planning (Vic), NSW Spatial Services, Queensland Government (QSpatial), theLIST © State of Tasmania and ACTmapi, used under CC BY 4.0. SA, WA and NT block sizes are typical-block assumptions.
Your typical 50/50 share in Blackburn North is $6,390–$6,750.