Work out your fence
The block size is Median of 197 house lots in Richmond. The metres are an estimate; change them to match your property.
Richmond 7025 · Clarence · Tasmania
A standard fence costs $60–$190/m installed. Your half of a typical dividing fence is about $2,980–$9,750.
Your 50/50 share · treated pine paling
$2,980–$9,750
102.6 m on a typical block · National range (few local prices yet)
The block size is Median of 197 house lots in Richmond. The metres are an estimate; change them to match your property.
| Fence | Price per metre | Your 50/50 share | Whole dividing fence | Front fence |
|---|---|---|---|---|
| Treated pine palingMost commondividing, frontNational range (few local prices yet) | $60–$190/m | $2,980–$9,750 | $5,950–$19,490 | $1,060–$3,480 |
| Colorbond steeldividing, frontNational range (few local prices yet) | $80–$260/m | $4,100–$13,340 | $8,210–$26,680 | $1,460–$4,760 |
| Chain wire / chain linkdividingNational range (few local prices yet) | $30–$150/m | $1,540–$7,700 | $3,080–$15,390 | $550–$2,750 |
| PVC / vinylfront, dividingNational range (few local prices yet) | $40–$90/m | $2,050–$4,620 | $4,100–$9,230 | $730–$1,650 |
| Timber picketfrontNational range (few local prices yet) | $60–$350/m | $2,980–$17,960 | $5,950–$35,910 | $1,060–$6,410 |
| Hardwood paling / lapped and cappeddividing, frontNational range (few local prices yet) | $80–$220/m | $4,100–$11,290 | $8,210–$22,570 | $1,460–$4,030 |
| Aluminium slat / pool fencingpool, front, screen, dividingNational range (few local prices yet) | $80–$400/m | $4,100–$20,520 | $8,210–$41,040 | $1,460–$7,320 |
| Tubular metalfront, poolNational range (few local prices yet) | $180–$350/m | $9,230–$17,960 | $18,470–$35,910 | $3,290–$6,410 |
| Semi-frameless glasspool, frontNational range (few local prices yet) | $200–$280/m | $10,260–$14,110 | $20,520–$28,220 | $3,660–$5,030 |
| Timber slat / horizontal slat screenscreen, front, dividingNational range (few local prices yet) | $250–$450/m | $12,830–$23,090 | $25,650–$46,170 | $4,580–$8,240 |
| Frameless glasspoolNational range (few local prices yet) | $280–$700+/m | $14,110–$35,910+ | $28,220–$71,820+ | $5,030–$12,810+ |
| Wrought iron / cast ironfrontNational range (few local prices yet) | $450–$1,000/m | $23,090–$51,300 | $46,170–$102,600 | $8,240–$18,300 |
| Brick, stone or rendered masonryfront, dividingNational range (few local prices yet) | $500–$1,200+/m | $25,650–$61,560+ | $51,300–$123,120+ | $9,150–$21,960+ |
| Sandstone and timberfrontNational range (few local prices yet) | $800–$1,200/m | $41,040–$61,560 | $82,080–$123,120 | $14,640–$21,960 |
Grey price-source rows use a state or national fallback. A national range is indicative and may have few local prices.
Old fence removal and disposal usually adds $20–$40 per metre, typically about $30. That’s around 20% of a typical Colorbond or paling price (usually 15–25%).
Rocky or hard ground usually adds $15–$45 per metre, typically about $25. That’s around 15% of a typical Colorbond or paling rate (usually 10–25%). Very hard ground sits at the high end.
A plinth or sleeper under the fence, for a small level change or to close the gap at the bottom, usually adds $10–$30 per metre, typically about $20.
Slopes, retaining, trees and tight access are confirmed by your fencer. Extras are calculated separately and do not compound.
Clarence fence rules · Read the full rules
A treated pine paling fence is $60–$190/m. Your typical 50/50 share for 102.6 m is $2,980–$9,750.
Neighbours generally split a sufficient boundary fence 50/50, and share repairs.
Within 4.5 m of the street: solid up to 1.2 m, or up to 1.8 m if the part above 1.2 m is at least 30% see-through.
Yes. Removal is an optional per-metre extra. The fencer confirms the final cost and any licensed asbestos work.
Block-size source: Cadastral Parcels, Localities and Local Government Areas from the LIST © State of Tasmania (CC BY 4.0). Last updated 17 Nov 2026. Cadastre: Vicmap © Department of Transport and Planning (Vic), NSW Spatial Services, Queensland Government (QSpatial), theLIST © State of Tasmania and ACTmapi, used under CC BY 4.0. SA, WA and NT block sizes are typical-block assumptions.
Your typical 50/50 share in Richmond is $2,980–$9,750.
| Fencer | Fence | Height | Published rate | Source |
|---|---|---|---|---|
| No local source rows are published yet. | ||||
Price research is available in how we price.