Work out your fence
The block size is Median of 1125 house lots in Bellerive. The metres are an estimate; change them to match your property.
Bellerive 7018 · Clarence · Tasmania
A standard fence costs $60–$190/m installed. Your half of a typical dividing fence is about $2,830–$9,260.
Your 50/50 share · treated pine paling
$2,830–$9,260
97.5 m on a typical block · National range (few local prices yet)
The block size is Median of 1125 house lots in Bellerive. The metres are an estimate; change them to match your property.
| Fence | Price per metre | Your 50/50 share | Whole dividing fence | Front fence |
|---|---|---|---|---|
| Treated pine palingMost commondividing, frontNational range (few local prices yet) | $60–$190/m | $2,830–$9,260 | $5,660–$18,530 | $1,050–$3,440 |
| Colorbond steeldividing, frontNational range (few local prices yet) | $80–$260/m | $3,900–$12,680 | $7,800–$25,350 | $1,450–$4,710 |
| Chain wire / chain linkdividingNational range (few local prices yet) | $30–$150/m | $1,460–$7,310 | $2,930–$14,630 | $540–$2,720 |
| PVC / vinylfront, dividingNational range (few local prices yet) | $40–$90/m | $1,950–$4,390 | $3,900–$8,780 | $720–$1,630 |
| Timber picketfrontNational range (few local prices yet) | $60–$350/m | $2,830–$17,060 | $5,660–$34,130 | $1,050–$6,340 |
| Hardwood paling / lapped and cappeddividing, frontNational range (few local prices yet) | $80–$220/m | $3,900–$10,730 | $7,800–$21,450 | $1,450–$3,980 |
| Aluminium slat / pool fencingpool, front, screen, dividingNational range (few local prices yet) | $80–$400/m | $3,900–$19,500 | $7,800–$39,000 | $1,450–$7,240 |
| Tubular metalfront, poolNational range (few local prices yet) | $180–$350/m | $8,780–$17,060 | $17,550–$34,130 | $3,260–$6,340 |
| Semi-frameless glasspool, frontNational range (few local prices yet) | $200–$280/m | $9,750–$13,410 | $19,500–$26,810 | $3,620–$4,980 |
| Timber slat / horizontal slat screenscreen, front, dividingNational range (few local prices yet) | $250–$450/m | $12,190–$21,940 | $24,380–$43,880 | $4,530–$8,150 |
| Frameless glasspoolNational range (few local prices yet) | $280–$700+/m | $13,410–$34,130+ | $26,810–$68,250+ | $4,980–$12,670+ |
| Wrought iron / cast ironfrontNational range (few local prices yet) | $450–$1,000/m | $21,940–$48,750 | $43,880–$97,500 | $8,150–$18,100 |
| Brick, stone or rendered masonryfront, dividingNational range (few local prices yet) | $500–$1,200+/m | $24,380–$58,500+ | $48,750–$117,000+ | $9,050–$21,720+ |
| Sandstone and timberfrontNational range (few local prices yet) | $800–$1,200/m | $39,000–$58,500 | $78,000–$117,000 | $14,480–$21,720 |
Grey price-source rows use a state or national fallback. A national range is indicative and may have few local prices.
Old fence removal and disposal usually adds $20–$40 per metre, typically about $30. That’s around 20% of a typical Colorbond or paling price (usually 15–25%).
Rocky or hard ground usually adds $15–$45 per metre, typically about $25. That’s around 15% of a typical Colorbond or paling rate (usually 10–25%). Very hard ground sits at the high end.
A plinth or sleeper under the fence, for a small level change or to close the gap at the bottom, usually adds $10–$30 per metre, typically about $20.
Slopes, retaining, trees and tight access are confirmed by your fencer. Extras are calculated separately and do not compound.
Clarence fence rules · Read the full rules
A treated pine paling fence is $60–$190/m. Your typical 50/50 share for 97.5 m is $2,830–$9,260.
Neighbours generally split a sufficient boundary fence 50/50, and share repairs.
Within 4.5 m of the street: solid up to 1.2 m, or up to 1.8 m if the part above 1.2 m is at least 30% see-through.
Yes. Removal is an optional per-metre extra. The fencer confirms the final cost and any licensed asbestos work.
Block-size source: Cadastral Parcels, Localities and Local Government Areas from the LIST © State of Tasmania (CC BY 4.0). Last updated 17 Nov 2026. Cadastre: Vicmap © Department of Transport and Planning (Vic), NSW Spatial Services, Queensland Government (QSpatial), theLIST © State of Tasmania and ACTmapi, used under CC BY 4.0. SA, WA and NT block sizes are typical-block assumptions.
Your typical 50/50 share in Bellerive is $2,830–$9,260.
| Fencer | Fence | Height | Published rate | Source |
|---|---|---|---|---|
| No local source rows are published yet. | ||||
Price research is available in how we price.