Work out your fence
The block size is the median of 262 house lots in Derwent Park. The metres are an estimate; change them to match your property.
Derwent Park 7009 · Glenorchy · Tasmania
A standard fence costs $60–$190/m installed. Your half of a typical dividing fence is about $2,680–$8,790.
Your 50/50 share · treated pine paling
$2,680–$8,790
92.5 m on a typical block · National price
The block size is the median of 262 house lots in Derwent Park. The metres are an estimate; change them to match your property.
| Fence | Per metre | Your share | Whole fence | Front fence |
|---|---|---|---|---|
| Treated pine palingMost commondividing, frontNational price | $60–$190/m | $2,680–$8,790 | $5,370–$17,580 | $970–$3,190 |
| Colorbond steeldividing, frontNational price | $80–$260/m | $3,700–$12,030 | $7,400–$24,050 | $1,340–$4,370 |
| Chain wire / chain linkdividingNational price | $30–$150/m | $1,390–$6,940 | $2,780–$13,880 | $500–$2,520 |
| PVC / vinylfront, dividingNational price | $40–$90/m | $1,850–$4,160 | $3,700–$8,330 | $670–$1,510 |
| Timber picketfrontNational price | $60–$350/m | $2,680–$16,190 | $5,370–$32,380 | $970–$5,880 |
| Hardwood paling / lapped and cappeddividing, frontNational price | $80–$220/m | $3,700–$10,180 | $7,400–$20,350 | $1,340–$3,700 |
| Aluminium slat / pool fencingpool, front, screen, dividingNational price | $80–$400/m | $3,700–$18,500 | $7,400–$37,000 | $1,340–$6,720 |
| Tubular metalfront, poolNational price | $180–$350/m | $8,330–$16,190 | $16,650–$32,380 | $3,020–$5,880 |
| Semi-frameless glasspool, frontNational price | $200–$280/m | $9,250–$12,720 | $18,500–$25,440 | $3,360–$4,620 |
| Timber slat / horizontal slat screenscreen, front, dividingNational price | $250–$450/m | $11,560–$20,810 | $23,130–$41,630 | $4,200–$7,560 |
| Frameless glasspoolNational price | $280–$700+/m | $12,720–$32,380+ | $25,440–$64,750+ | $4,620–$11,760+ |
| Wrought iron / cast ironfrontNational price | $450–$1,000/m | $20,810–$46,250 | $41,630–$92,500 | $7,560–$16,800 |
| Brick, stone or rendered masonryfront, dividingNational price | $500–$1,200+/m | $23,130–$55,500+ | $46,250–$111,000+ | $8,400–$20,160+ |
| Sandstone and timberfrontNational price | $800–$1,200/m | $37,000–$55,500 | $74,000–$111,000 | $13,440–$20,160 |
Rows marked National price use the national range because we have fewer than 2 local fencer prices for that type. See published prices.
Old fence removal and disposal usually adds $20–$40 per metre, typically about $30. That’s around 20% of a typical Colorbond or paling price (usually 15–25%).
Rocky or hard ground usually adds $15–$45 per metre, typically about $25. That’s around 15% of a typical Colorbond or paling rate (usually 10–25%). Very hard ground sits at the high end.
A plinth or sleeper under the fence, for a small level change or to close the gap at the bottom, usually adds $10–$30 per metre, typically about $20.
Slopes, retaining, trees and tight access are confirmed by your fencer. Extras are calculated separately and do not compound.
Glenorchy fence rules · Read the full rules
We’ve checked some of Glenorchy’s pages, not all. Where there’s no council rule on file we show the Tasmania rule. Check with council before you build.
A treated pine paling fence is $60–$190/m. Your typical 50/50 share for 92.5 m is $2,680–$8,790.
Neighbours generally split a sufficient boundary fence 50/50, and share repairs.
Within 4.5 m of the street: solid up to 1.2 m, or up to 1.8 m if the part above 1.2 m is at least 30% see-through.
Yes. Removal is an optional per-metre extra. The fencer confirms the final cost and any licensed asbestos work.
Block-size source: Cadastral Parcels, Localities and Local Government Areas from the LIST © State of Tasmania (CC BY 4.0). Last updated 17 Nov 2026. Cadastre: Vicmap © Department of Transport and Planning (Vic), NSW Spatial Services, Queensland Government (QSpatial), theLIST © State of Tasmania and ACTmapi, used under CC BY 4.0. SA, WA and NT block sizes are typical-block assumptions.
Your typical 50/50 share in Derwent Park is $2,680–$8,790.