Work out your fence
The block size is the median of 1,802 house lots in Claremont. The metres are an estimate; change them to match your property.
Claremont 7011 · Glenorchy · Tasmania
A standard fence costs $60–$190/m installed. Your half of a typical dividing fence is about $2,730–$8,930.
Your 50/50 share · treated pine paling
$2,730–$8,930
94 m on a typical block · National price
The block size is the median of 1,802 house lots in Claremont. The metres are an estimate; change them to match your property.
| Fence | Per metre | Your share | Whole fence | Front fence |
|---|---|---|---|---|
| Treated pine palingMost commondividing, frontNational price | $60–$190/m | $2,730–$8,930 | $5,450–$17,860 | $1,060–$3,480 |
| Colorbond steeldividing, frontNational price | $80–$260/m | $3,760–$12,220 | $7,520–$24,440 | $1,460–$4,760 |
| Chain wire / chain linkdividingNational price | $30–$150/m | $1,410–$7,050 | $2,820–$14,100 | $550–$2,750 |
| PVC / vinylfront, dividingNational price | $40–$90/m | $1,880–$4,230 | $3,760–$8,460 | $730–$1,650 |
| Timber picketfrontNational price | $60–$350/m | $2,730–$16,450 | $5,450–$32,900 | $1,060–$6,410 |
| Hardwood paling / lapped and cappeddividing, frontNational price | $80–$220/m | $3,760–$10,340 | $7,520–$20,680 | $1,460–$4,030 |
| Aluminium slat / pool fencingpool, front, screen, dividingNational price | $80–$400/m | $3,760–$18,800 | $7,520–$37,600 | $1,460–$7,320 |
| Tubular metalfront, poolNational price | $180–$350/m | $8,460–$16,450 | $16,920–$32,900 | $3,290–$6,410 |
| Semi-frameless glasspool, frontNational price | $200–$280/m | $9,400–$12,930 | $18,800–$25,850 | $3,660–$5,030 |
| Timber slat / horizontal slat screenscreen, front, dividingNational price | $250–$450/m | $11,750–$21,150 | $23,500–$42,300 | $4,580–$8,240 |
| Frameless glasspoolNational price | $280–$700+/m | $12,930–$32,900+ | $25,850–$65,800+ | $5,030–$12,810+ |
| Wrought iron / cast ironfrontNational price | $450–$1,000/m | $21,150–$47,000 | $42,300–$94,000 | $8,240–$18,300 |
| Brick, stone or rendered masonryfront, dividingNational price | $500–$1,200+/m | $23,500–$56,400+ | $47,000–$112,800+ | $9,150–$21,960+ |
| Sandstone and timberfrontNational price | $800–$1,200/m | $37,600–$56,400 | $75,200–$112,800 | $14,640–$21,960 |
Rows marked National price use the national range because we have fewer than 2 local fencer prices for that type. See published prices.
Old fence removal and disposal usually adds $20–$40 per metre, typically about $30. That’s around 20% of a typical Colorbond or paling price (usually 15–25%).
Rocky or hard ground usually adds $15–$45 per metre, typically about $25. That’s around 15% of a typical Colorbond or paling rate (usually 10–25%). Very hard ground sits at the high end.
A plinth or sleeper under the fence, for a small level change or to close the gap at the bottom, usually adds $10–$30 per metre, typically about $20.
Slopes, retaining, trees and tight access are confirmed by your fencer. Extras are calculated separately and do not compound.
Glenorchy fence rules · Read the full rules
We’ve checked some of Glenorchy’s pages, not all. Where there’s no council rule on file we show the Tasmania rule. Check with council before you build.
A treated pine paling fence is $60–$190/m. Your typical 50/50 share for 94 m is $2,730–$8,930.
Neighbours generally split a sufficient boundary fence 50/50, and share repairs.
Within 4.5 m of the street: solid up to 1.2 m, or up to 1.8 m if the part above 1.2 m is at least 30% see-through.
Yes. Removal is an optional per-metre extra. The fencer confirms the final cost and any licensed asbestos work.
Block-size source: Cadastral Parcels, Localities and Local Government Areas from the LIST © State of Tasmania (CC BY 4.0). Last updated 17 Nov 2026. Cadastre: Vicmap © Department of Transport and Planning (Vic), NSW Spatial Services, Queensland Government (QSpatial), theLIST © State of Tasmania and ACTmapi, used under CC BY 4.0. SA, WA and NT block sizes are typical-block assumptions.
Your typical 50/50 share in Claremont is $2,730–$8,930.