Work out your fence
The block size is Median of 256 house lots in Burnie. The metres are an estimate; change them to match your property.
Burnie 7320 · Burnie · Tasmania
A standard fence costs $60–$190/m installed. Your half of a typical dividing fence is about $2,450–$8,020.
Your 50/50 share · treated pine paling
$2,450–$8,020
84.4 m on a typical block · National range (few local prices yet)
The block size is Median of 256 house lots in Burnie. The metres are an estimate; change them to match your property.
| Fence | Price per metre | Your 50/50 share | Whole dividing fence | Front fence |
|---|---|---|---|---|
| Treated pine palingMost commondividing, frontNational range (few local prices yet) | $60–$190/m | $2,450–$8,020 | $4,900–$16,040 | $880–$2,890 |
| Colorbond steeldividing, frontNational range (few local prices yet) | $80–$260/m | $3,380–$10,970 | $6,750–$21,940 | $1,220–$3,950 |
| Chain wire / chain linkdividingNational range (few local prices yet) | $30–$150/m | $1,270–$6,330 | $2,530–$12,660 | $460–$2,280 |
| PVC / vinylfront, dividingNational range (few local prices yet) | $40–$90/m | $1,690–$3,800 | $3,380–$7,600 | $610–$1,370 |
| Timber picketfrontNational range (few local prices yet) | $60–$350/m | $2,450–$14,770 | $4,900–$29,540 | $880–$5,320 |
| Hardwood paling / lapped and cappeddividing, frontNational range (few local prices yet) | $80–$220/m | $3,380–$9,280 | $6,750–$18,570 | $1,220–$3,340 |
| Aluminium slat / pool fencingpool, front, screen, dividingNational range (few local prices yet) | $80–$400/m | $3,380–$16,880 | $6,750–$33,760 | $1,220–$6,080 |
| Tubular metalfront, poolNational range (few local prices yet) | $180–$350/m | $7,600–$14,770 | $15,190–$29,540 | $2,740–$5,320 |
| Semi-frameless glasspool, frontNational range (few local prices yet) | $200–$280/m | $8,440–$11,610 | $16,880–$23,210 | $3,040–$4,180 |
| Timber slat / horizontal slat screenscreen, front, dividingNational range (few local prices yet) | $250–$450/m | $10,550–$18,990 | $21,100–$37,980 | $3,800–$6,840 |
| Frameless glasspoolNational range (few local prices yet) | $280–$700+/m | $11,610–$29,540+ | $23,210–$59,080+ | $4,180–$10,640+ |
| Wrought iron / cast ironfrontNational range (few local prices yet) | $450–$1,000/m | $18,990–$42,200 | $37,980–$84,400 | $6,840–$15,200 |
| Brick, stone or rendered masonryfront, dividingNational range (few local prices yet) | $500–$1,200+/m | $21,100–$50,640+ | $42,200–$101,280+ | $7,600–$18,240+ |
| Sandstone and timberfrontNational range (few local prices yet) | $800–$1,200/m | $33,760–$50,640 | $67,520–$101,280 | $12,160–$18,240 |
Grey price-source rows use a state or national fallback. A national range is indicative and may have few local prices.
Old fence removal and disposal usually adds $20–$40 per metre, typically about $30. That’s around 20% of a typical Colorbond or paling price (usually 15–25%).
Rocky or hard ground usually adds $15–$45 per metre, typically about $25. That’s around 15% of a typical Colorbond or paling rate (usually 10–25%). Very hard ground sits at the high end.
A plinth or sleeper under the fence, for a small level change or to close the gap at the bottom, usually adds $10–$30 per metre, typically about $20.
Slopes, retaining, trees and tight access are confirmed by your fencer. Extras are calculated separately and do not compound.
Burnie fence rules · Read the full rules
A treated pine paling fence is $60–$190/m. Your typical 50/50 share for 84.4 m is $2,450–$8,020.
Neighbours generally split a sufficient boundary fence 50/50, and share repairs.
Within 4.5 m of the street: solid up to 1.2 m, then at least 30% see-through up to 1.8 m, with no planning permit.
Yes. Removal is an optional per-metre extra. The fencer confirms the final cost and any licensed asbestos work.
Block-size source: Cadastral Parcels, Localities and Local Government Areas from the LIST © State of Tasmania (CC BY 4.0). Last updated 17 Nov 2026. Cadastre: Vicmap © Department of Transport and Planning (Vic), NSW Spatial Services, Queensland Government (QSpatial), theLIST © State of Tasmania and ACTmapi, used under CC BY 4.0. SA, WA and NT block sizes are typical-block assumptions.
Your typical 50/50 share in Burnie is $2,450–$8,020.
| Fencer | Fence | Height | Published rate | Source |
|---|---|---|---|---|
| VIT Construction | Treated pine paling | 1.8 m | $100–$130 | vitconstruction.com · checked 16 Nov 2026 |
| VIT Construction | Colorbond | 1.8 m | $110–$160 | vitconstruction.com · checked 16 Nov 2026 |
Price research is available in how we price.