Tasmania · local fence rules · checked 17 Nov 2026

Fence rules in Burnie.

Most fences here don’t need council approval: front fences up to 1.8 m and side or rear fences up to 2.1 m. Neighbours split a dividing fence 50/50.

Who pays for a dividing fence?

Neighbours generally split a sufficient boundary fence 50/50, and share repairs.

Source: Official source · checked 17 Nov 2026

Front fence height limits

Within 4.5 m of the street: solid up to 1.2 m, then at least 30% see-through up to 1.8 m, with no planning permit.

Read the council’s wording
Council page: "The following fences do not require a Planning Permit from Council Planning Officer : Front fences (fences within 4.5m of a frontage): may be solid up to 1.2 metres in height and then from the height above 1.2 metres up to 1.8 metres must have a uniform transparency of at least 30%." "Fences not within 4.5m of a frontage: not more than a height of 1.8 metres if adjoining public land or 2.1 metres if not adjoining public land Fences other than those listed above may be constructed if a Discretionary Planning Permit is provided by Council: Apply for a Planning Permit The following "
Source ↗ · checked 17 Nov 2026

Source: Official source · checked 17 Nov 2026

When you need approval

Side and rear fences up to 2.1 m (1.8 m next to public land) need no planning permit. Masonry fences over 1.2 m need building assessment.

Read the council’s wording
Council page: "Fence Construction Fences must be appropriate to the location and may include: Rabbit Proof Colorbond Chainwire Timber Post and Rail The minimum construction requirements are as follows: Height In accordance with policy: Minimum 1,500mm – Maximum 1,800mm." "Beneath the fence, minimum of 200mm wide x 100mm deep, from ground level and the palings are to be lapped over the face of the plinth."
Source ↗ · checked 17 Nov 2026

Source: Official source · checked 17 Nov 2026

Pool fence rules

Pools and spas that hold 300 mm or more, installed from 1994, need a compliant safety barrier.

Source: Official source · checked 17 Nov 2026

Fences in bushfire-prone areas

Land is bushfire-prone if it's in the bushfire overlay, or within 100 m of 1 ha of bushland. Building work there needs a BAL assessment.

Source: Official source · checked 17 Nov 2026

What a fence costs in Burnie

Park Grove has the most published lot data in Burnie.

FencePrice per metreYour 50/50 share
Treated pine paling in Park Grove$60–$190/m
Colorbond steel in Park Grove$80–$260/m

Fence rule FAQs

Do I need council approval for a fence in Burnie?

Side and rear fences up to 2.1 m (1.8 m next to public land) need no planning permit. Masonry fences over 1.2 m need building assessment.

Who pays for a dividing fence in Burnie?

Neighbours generally split a sufficient boundary fence 50/50, and share repairs.

How high does a pool fence need to be in Burnie?

Pools and spas that hold 300 mm or more, installed from 1994, need a compliant safety barrier.

Can I use a timber fence in a bushfire area?

Land is bushfire-prone if it's in the bushfire overlay, or within 100 m of 1 ha of bushland. Building work there needs a BAL assessment.

How much does a fence cost in Park Grove?

Treated pine paling is $60–$190/m. Your half of a typical dividing fence is $2,890–$9,450.

Contact Burnie

Email [email protected]. Visit the council website.

Get quotes from Burnie fence builders

Compare local quotes with the typical price in Park Grove.

  1. Tell us the suburb, fence and length. It takes about 2 minutes.
  2. We send it to up to 3 local fencers. Free for homeowners.
  3. Compare their quotes with the estimate above. You choose who to hire.
Get up to 3 quotes →

Rule headings use published category labels. Official sources should be checked before building. General information only. These are estimates, not quotes, and not legal, planning, building or financial advice. Check your own title, council and neighbour situation before you build.