Work out your fence
The block size is Median of 229 house lots in Yerrinbool. The metres are an estimate; change them to match your property.
Yerrinbool 2575 · Wingecarribee · New South Wales
A standard fence costs $150–$200/m installed. Your half of a typical dividing fence is about $8,290–$11,200.
Your 50/50 share · treated pine paling
$8,290–$11,200
112 m on a typical block · NSW median of fencers’ prices
The block size is Median of 229 house lots in Yerrinbool. The metres are an estimate; change them to match your property.
| Fence | Price per metre | Your 50/50 share | Whole dividing fence | Front fence |
|---|---|---|---|---|
| Treated pine palingMost commondividing, frontNSW median of fencers’ prices | $150–$200/m | $8,290–$11,200 | $16,580–$22,400 | $2,710–$3,660 |
| Colorbond steeldividing, frontNSW median of fencers’ prices | $130–$160/m | $7,000–$8,850 | $14,000–$17,700 | $2,290–$2,890 |
| Chain wire / chain linkdividingNational range (few local prices yet) | $30–$150/m | $1,680–$8,400 | $3,360–$16,800 | $550–$2,750 |
| PVC / vinylfront, dividingNational range (few local prices yet) | $40–$90/m | $2,240–$5,040 | $4,480–$10,080 | $730–$1,650 |
| Timber picketfrontNational range (few local prices yet) | $60–$350/m | $3,250–$19,600 | $6,500–$39,200 | $1,060–$6,410 |
| Aluminium slat / pool fencingpool, front, screen, dividingNational range (few local prices yet) | $80–$400/m | $4,480–$22,400 | $8,960–$44,800 | $1,460–$7,320 |
| Tubular metalfront, poolNational range (few local prices yet) | $180–$350/m | $10,080–$19,600 | $20,160–$39,200 | $3,290–$6,410 |
| Hardwood paling / lapped and cappeddividing, frontNSW median of fencers’ prices | $180–$320/m | $10,300–$17,700 | $20,610–$35,390 | $3,370–$5,780 |
| Semi-frameless glasspool, frontNational range (few local prices yet) | $200–$280/m | $11,200–$15,400 | $22,400–$30,800 | $3,660–$5,030 |
| Timber slat / horizontal slat screenscreen, front, dividingNational range (few local prices yet) | $250–$450/m | $14,000–$25,200 | $28,000–$50,400 | $4,580–$8,240 |
| Frameless glasspoolNational range (few local prices yet) | $280–$700+/m | $15,400–$39,200+ | $30,800–$78,400+ | $5,030–$12,810+ |
| Wrought iron / cast ironfrontNational range (few local prices yet) | $450–$1,000/m | $25,200–$56,000 | $50,400–$112,000 | $8,240–$18,300 |
| Brick, stone or rendered masonryfront, dividingNational range (few local prices yet) | $500–$1,200+/m | $28,000–$67,200+ | $56,000–$134,400+ | $9,150–$21,960+ |
| Sandstone and timberfrontNational range (few local prices yet) | $800–$1,200/m | $44,800–$67,200 | $89,600–$134,400 | $14,640–$21,960 |
Grey price-source rows use a state or national fallback. A national range is indicative and may have few local prices.
Old fence removal and disposal usually adds $20–$40 per metre, typically about $30. That’s around 20% of a typical Colorbond or paling price (usually 15–25%).
Rocky or hard ground usually adds $15–$45 per metre, typically about $25. That’s around 15% of a typical Colorbond or paling rate (usually 10–25%). Very hard ground sits at the high end.
A plinth or sleeper under the fence, for a small level change or to close the gap at the bottom, usually adds $10–$30 per metre, typically about $20.
Slopes, retaining, trees and tight access are confirmed by your fencer. Extras are calculated separately and do not compound.
Wingecarribee fence rules · Read the full rules
A treated pine paling fence is $150–$200/m. Your typical 50/50 share for 112 m is $8,290–$11,200.
Neighbours generally split a sufficient dividing fence 50/50. If you want a higher standard, you pay the extra.
Up to 1.2 m in most residential zones without approval. A higher front fence needs a complying development certificate or a DA.
Yes. Removal is an optional per-metre extra. The fencer confirms the final cost and any licensed asbestos work.
Block-size source: NSW Cadastre (Lot layer) and NSW Administrative Boundaries (Suburb, LGA) © Spatial Services, NSW Department of Customer Service (CC BY 4.0). Last updated 17 Nov 2026. Cadastre: Vicmap © Department of Transport and Planning (Vic), NSW Spatial Services, Queensland Government (QSpatial), theLIST © State of Tasmania and ACTmapi, used under CC BY 4.0. SA, WA and NT block sizes are typical-block assumptions.
Your typical 50/50 share in Yerrinbool is $8,290–$11,200.
| Fencer | Fence | Height | Published rate | Source |
|---|---|---|---|---|
| No local source rows are published yet. | ||||
Price research is available in how we price.