Work out your fence
The block size is Median of 1796 house lots in Bowral. The metres are an estimate; change them to match your property.
Bowral 2576 · Wingecarribee · New South Wales
A standard fence costs $150–$200/m installed. Your half of a typical dividing fence is about $8,060–$10,890.
Your 50/50 share · treated pine paling
$8,060–$10,890
108.9 m on a typical block · NSW median of fencers’ prices
The block size is Median of 1796 house lots in Bowral. The metres are an estimate; change them to match your property.
| Fence | Price per metre | Your 50/50 share | Whole dividing fence | Front fence |
|---|---|---|---|---|
| Treated pine palingMost commondividing, frontNSW median of fencers’ prices | $150–$200/m | $8,060–$10,890 | $16,120–$21,780 | $2,960–$4,000 |
| Colorbond steeldividing, frontNSW median of fencers’ prices | $130–$160/m | $6,810–$8,600 | $13,610–$17,210 | $2,500–$3,160 |
| Chain wire / chain linkdividingNational range (few local prices yet) | $30–$150/m | $1,630–$8,170 | $3,270–$16,340 | $600–$3,000 |
| PVC / vinylfront, dividingNational range (few local prices yet) | $40–$90/m | $2,180–$4,900 | $4,360–$9,800 | $800–$1,800 |
| Timber picketfrontNational range (few local prices yet) | $60–$350/m | $3,160–$19,060 | $6,320–$38,120 | $1,160–$7,000 |
| Aluminium slat / pool fencingpool, front, screen, dividingNational range (few local prices yet) | $80–$400/m | $4,360–$21,780 | $8,710–$43,560 | $1,600–$8,000 |
| Tubular metalfront, poolNational range (few local prices yet) | $180–$350/m | $9,800–$19,060 | $19,600–$38,120 | $3,600–$7,000 |
| Hardwood paling / lapped and cappeddividing, frontNSW median of fencers’ prices | $180–$320/m | $10,020–$17,210 | $20,040–$34,410 | $3,680–$6,320 |
| Semi-frameless glasspool, frontNational range (few local prices yet) | $200–$280/m | $10,890–$14,970 | $21,780–$29,950 | $4,000–$5,500 |
| Timber slat / horizontal slat screenscreen, front, dividingNational range (few local prices yet) | $250–$450/m | $13,610–$24,500 | $27,230–$49,010 | $5,000–$9,000 |
| Frameless glasspoolNational range (few local prices yet) | $280–$700+/m | $14,970–$38,120+ | $29,950–$76,230+ | $5,500–$14,000+ |
| Wrought iron / cast ironfrontNational range (few local prices yet) | $450–$1,000/m | $24,500–$54,450 | $49,010–$108,900 | $9,000–$20,000 |
| Brick, stone or rendered masonryfront, dividingNational range (few local prices yet) | $500–$1,200+/m | $27,230–$65,340+ | $54,450–$130,680+ | $10,000–$24,000+ |
| Sandstone and timberfrontNational range (few local prices yet) | $800–$1,200/m | $43,560–$65,340 | $87,120–$130,680 | $16,000–$24,000 |
Grey price-source rows use a state or national fallback. A national range is indicative and may have few local prices.
Old fence removal and disposal usually adds $20–$40 per metre, typically about $30. That’s around 20% of a typical Colorbond or paling price (usually 15–25%).
Rocky or hard ground usually adds $15–$45 per metre, typically about $25. That’s around 15% of a typical Colorbond or paling rate (usually 10–25%). Very hard ground sits at the high end.
A plinth or sleeper under the fence, for a small level change or to close the gap at the bottom, usually adds $10–$30 per metre, typically about $20.
Slopes, retaining, trees and tight access are confirmed by your fencer. Extras are calculated separately and do not compound.
Wingecarribee fence rules · Read the full rules
A treated pine paling fence is $150–$200/m. Your typical 50/50 share for 108.9 m is $8,060–$10,890.
Neighbours generally split a sufficient dividing fence 50/50. If you want a higher standard, you pay the extra.
Up to 1.2 m in most residential zones without approval. A higher front fence needs a complying development certificate or a DA.
Yes. Removal is an optional per-metre extra. The fencer confirms the final cost and any licensed asbestos work.
Block-size source: NSW Cadastre (Lot layer) and NSW Administrative Boundaries (Suburb, LGA) © Spatial Services, NSW Department of Customer Service (CC BY 4.0). Last updated 17 Nov 2026. Cadastre: Vicmap © Department of Transport and Planning (Vic), NSW Spatial Services, Queensland Government (QSpatial), theLIST © State of Tasmania and ACTmapi, used under CC BY 4.0. SA, WA and NT block sizes are typical-block assumptions.
Your typical 50/50 share in Bowral is $8,060–$10,890.
| Fencer | Fence | Height | Published rate | Source |
|---|---|---|---|---|
| No local source rows are published yet. | ||||
Price research is available in how we price.