Work out your fence
The block size is Median of 25 house lots in Wallendbeen. The metres are an estimate; change them to match your property.
Wallendbeen 2588 · Cootamundra-Gundagai Regional · New South Wales
A standard fence costs $150–$200/m installed. Your half of a typical dividing fence is about $7,700–$10,410.
Your 50/50 share · treated pine paling
$7,700–$10,410
104.1 m on a typical block · NSW median of fencers’ prices
The block size is Median of 25 house lots in Wallendbeen. The metres are an estimate; change them to match your property.
| Fence | Price per metre | Your 50/50 share | Whole dividing fence | Front fence |
|---|---|---|---|---|
| Treated pine palingMost commondividing, frontNSW median of fencers’ prices | $150–$200/m | $7,700–$10,410 | $15,410–$20,820 | $2,960–$4,000 |
| Colorbond steeldividing, frontNSW median of fencers’ prices | $130–$160/m | $6,510–$8,220 | $13,010–$16,450 | $2,500–$3,160 |
| Chain wire / chain linkdividingNational range (few local prices yet) | $30–$150/m | $1,560–$7,810 | $3,120–$15,620 | $600–$3,000 |
| PVC / vinylfront, dividingNational range (few local prices yet) | $40–$90/m | $2,080–$4,680 | $4,160–$9,370 | $800–$1,800 |
| Timber picketfrontNational range (few local prices yet) | $60–$350/m | $3,020–$18,220 | $6,040–$36,440 | $1,160–$7,000 |
| Aluminium slat / pool fencingpool, front, screen, dividingNational range (few local prices yet) | $80–$400/m | $4,160–$20,820 | $8,330–$41,640 | $1,600–$8,000 |
| Tubular metalfront, poolNational range (few local prices yet) | $180–$350/m | $9,370–$18,220 | $18,740–$36,440 | $3,600–$7,000 |
| Hardwood paling / lapped and cappeddividing, frontNSW median of fencers’ prices | $180–$320/m | $9,580–$16,450 | $19,150–$32,900 | $3,680–$6,320 |
| Semi-frameless glasspool, frontNational range (few local prices yet) | $200–$280/m | $10,410–$14,310 | $20,820–$28,630 | $4,000–$5,500 |
| Timber slat / horizontal slat screenscreen, front, dividingNational range (few local prices yet) | $250–$450/m | $13,010–$23,420 | $26,030–$46,850 | $5,000–$9,000 |
| Frameless glasspoolNational range (few local prices yet) | $280–$700+/m | $14,310–$36,440+ | $28,630–$72,870+ | $5,500–$14,000+ |
| Wrought iron / cast ironfrontNational range (few local prices yet) | $450–$1,000/m | $23,420–$52,050 | $46,850–$104,100 | $9,000–$20,000 |
| Brick, stone or rendered masonryfront, dividingNational range (few local prices yet) | $500–$1,200+/m | $26,030–$62,460+ | $52,050–$124,920+ | $10,000–$24,000+ |
| Sandstone and timberfrontNational range (few local prices yet) | $800–$1,200/m | $41,640–$62,460 | $83,280–$124,920 | $16,000–$24,000 |
Grey price-source rows use a state or national fallback. A national range is indicative and may have few local prices.
Old fence removal and disposal usually adds $20–$40 per metre, typically about $30. That’s around 20% of a typical Colorbond or paling price (usually 15–25%).
Rocky or hard ground usually adds $15–$45 per metre, typically about $25. That’s around 15% of a typical Colorbond or paling rate (usually 10–25%). Very hard ground sits at the high end.
A plinth or sleeper under the fence, for a small level change or to close the gap at the bottom, usually adds $10–$30 per metre, typically about $20.
Slopes, retaining, trees and tight access are confirmed by your fencer. Extras are calculated separately and do not compound.
Cootamundra-Gundagai Regional fence rules · Read the full rules
We’ve checked some of Cootamundra-Gundagai Regional’s pages, not all. Where there’s no council rule on file we show the New South Wales rule. Check with council before you build.
A treated pine paling fence is $150–$200/m. Your typical 50/50 share for 104.1 m is $7,700–$10,410.
Neighbours generally split a sufficient dividing fence 50/50. If you want a higher standard, you pay the extra.
Up to 1.2 m in most residential zones without approval. A higher front fence needs a complying development certificate or a DA.
Yes. Removal is an optional per-metre extra. The fencer confirms the final cost and any licensed asbestos work.
The property owner usually pays the full cost. About 64% of local lots have a laneway.
Block-size source: NSW Cadastre (Lot layer) and NSW Administrative Boundaries (Suburb, LGA) © Spatial Services, NSW Department of Customer Service (CC BY 4.0). Last updated 17 Nov 2026. Cadastre: Vicmap © Department of Transport and Planning (Vic), NSW Spatial Services, Queensland Government (QSpatial), theLIST © State of Tasmania and ACTmapi, used under CC BY 4.0. SA, WA and NT block sizes are typical-block assumptions.
Your typical 50/50 share in Wallendbeen is $7,700–$10,410.
| Fencer | Fence | Height | Published rate | Source |
|---|---|---|---|---|
| No local source rows are published yet. | ||||
Price research is available in how we price.