Work out your fence
The block size is Median of 87 house lots in Coolac. The metres are an estimate; change them to match your property.
Coolac 2727 · Cootamundra-Gundagai Regional · New South Wales
A standard fence costs $150–$200/m installed. Your half of a typical dividing fence is about $7,440–$10,060.
Your 50/50 share · treated pine paling
$7,440–$10,060
100.6 m on a typical block · NSW median of fencers’ prices
The block size is Median of 87 house lots in Coolac. The metres are an estimate; change them to match your property.
| Fence | Price per metre | Your 50/50 share | Whole dividing fence | Front fence |
|---|---|---|---|---|
| Treated pine palingMost commondividing, frontNSW median of fencers’ prices | $150–$200/m | $7,440–$10,060 | $14,890–$20,120 | $2,970–$4,020 |
| Colorbond steeldividing, frontNSW median of fencers’ prices | $130–$160/m | $6,290–$7,950 | $12,580–$15,890 | $2,510–$3,180 |
| Chain wire / chain linkdividingNational range (few local prices yet) | $30–$150/m | $1,510–$7,550 | $3,020–$15,090 | $600–$3,020 |
| PVC / vinylfront, dividingNational range (few local prices yet) | $40–$90/m | $2,010–$4,530 | $4,020–$9,050 | $800–$1,810 |
| Timber picketfrontNational range (few local prices yet) | $60–$350/m | $2,920–$17,610 | $5,830–$35,210 | $1,170–$7,040 |
| Aluminium slat / pool fencingpool, front, screen, dividingNational range (few local prices yet) | $80–$400/m | $4,020–$20,120 | $8,050–$40,240 | $1,610–$8,040 |
| Tubular metalfront, poolNational range (few local prices yet) | $180–$350/m | $9,050–$17,610 | $18,110–$35,210 | $3,620–$7,040 |
| Hardwood paling / lapped and cappeddividing, frontNSW median of fencers’ prices | $180–$320/m | $9,260–$15,890 | $18,510–$31,790 | $3,700–$6,350 |
| Semi-frameless glasspool, frontNational range (few local prices yet) | $200–$280/m | $10,060–$13,830 | $20,120–$27,670 | $4,020–$5,530 |
| Timber slat / horizontal slat screenscreen, front, dividingNational range (few local prices yet) | $250–$450/m | $12,580–$22,640 | $25,150–$45,270 | $5,030–$9,050 |
| Frameless glasspoolNational range (few local prices yet) | $280–$700+/m | $13,830–$35,210+ | $27,670–$70,420+ | $5,530–$14,070+ |
| Wrought iron / cast ironfrontNational range (few local prices yet) | $450–$1,000/m | $22,640–$50,300 | $45,270–$100,600 | $9,050–$20,100 |
| Brick, stone or rendered masonryfront, dividingNational range (few local prices yet) | $500–$1,200+/m | $25,150–$60,360+ | $50,300–$120,720+ | $10,050–$24,120+ |
| Sandstone and timberfrontNational range (few local prices yet) | $800–$1,200/m | $40,240–$60,360 | $80,480–$120,720 | $16,080–$24,120 |
Grey price-source rows use a state or national fallback. A national range is indicative and may have few local prices.
Old fence removal and disposal usually adds $20–$40 per metre, typically about $30. That’s around 20% of a typical Colorbond or paling price (usually 15–25%).
Rocky or hard ground usually adds $15–$45 per metre, typically about $25. That’s around 15% of a typical Colorbond or paling rate (usually 10–25%). Very hard ground sits at the high end.
A plinth or sleeper under the fence, for a small level change or to close the gap at the bottom, usually adds $10–$30 per metre, typically about $20.
Slopes, retaining, trees and tight access are confirmed by your fencer. Extras are calculated separately and do not compound.
Cootamundra-Gundagai Regional fence rules · Read the full rules
We’ve checked some of Cootamundra-Gundagai Regional’s pages, not all. Where there’s no council rule on file we show the New South Wales rule. Check with council before you build.
A treated pine paling fence is $150–$200/m. Your typical 50/50 share for 100.6 m is $7,440–$10,060.
Neighbours generally split a sufficient dividing fence 50/50. If you want a higher standard, you pay the extra.
Up to 1.2 m in most residential zones without approval. A higher front fence needs a complying development certificate or a DA.
Yes. Removal is an optional per-metre extra. The fencer confirms the final cost and any licensed asbestos work.
The property owner usually pays the full cost. About 54% of local lots have a laneway.
Block-size source: NSW Cadastre (Lot layer) and NSW Administrative Boundaries (Suburb, LGA) © Spatial Services, NSW Department of Customer Service (CC BY 4.0). Last updated 17 Nov 2026. Cadastre: Vicmap © Department of Transport and Planning (Vic), NSW Spatial Services, Queensland Government (QSpatial), theLIST © State of Tasmania and ACTmapi, used under CC BY 4.0. SA, WA and NT block sizes are typical-block assumptions.
Your typical 50/50 share in Coolac is $7,440–$10,060.
| Fencer | Fence | Height | Published rate | Source |
|---|---|---|---|---|
| No local source rows are published yet. | ||||
Price research is available in how we price.