Work out your fence
The block size is Median of 2 house lots in Upper Burringbar. The metres are an estimate; change them to match your property.
Upper Burringbar 2483 · Tweed · New South Wales
A standard fence costs $150–$180/m installed. Your half of a typical dividing fence is about $7,440–$8,830.
Your 50/50 share · treated pine paling
$7,440–$8,830
99.2 m on a typical block · Wider-area fencers’ prices (3 fencers)
The block size is Median of 2 house lots in Upper Burringbar. The metres are an estimate; change them to match your property.
| Fence | Price per metre | Your 50/50 share | Whole dividing fence | Front fence |
|---|---|---|---|---|
| Treated pine palingMost commondividing, frontWider-area fencers’ prices (3 fencers) | $150–$180/m | $7,440–$8,830 | $14,880–$17,660 | $2,880–$3,420 |
| Colorbond steeldividing, frontWider-area fencers’ prices (3 fencers) | $120–$140/m | $5,850–$7,090 | $11,710–$14,190 | $2,270–$2,750 |
| Chain wire / chain linkdividingNational range (few local prices yet) | $30–$150/m | $1,490–$7,440 | $2,980–$14,880 | $580–$2,880 |
| PVC / vinylfront, dividingNational range (few local prices yet) | $40–$90/m | $1,980–$4,460 | $3,970–$8,930 | $770–$1,730 |
| Timber picketfrontNational range (few local prices yet) | $60–$350/m | $2,880–$17,360 | $5,750–$34,720 | $1,110–$6,720 |
| Aluminium slat / pool fencingpool, front, screen, dividingNational range (few local prices yet) | $80–$400/m | $3,970–$19,840 | $7,940–$39,680 | $1,540–$7,680 |
| Tubular metalfront, poolNational range (few local prices yet) | $180–$350/m | $8,930–$17,360 | $17,860–$34,720 | $3,460–$6,720 |
| Hardwood paling / lapped and cappeddividing, frontNSW median of fencers’ prices | $180–$320/m | $9,130–$15,670 | $18,250–$31,350 | $3,530–$6,070 |
| Semi-frameless glasspool, frontNational range (few local prices yet) | $200–$280/m | $9,920–$13,640 | $19,840–$27,280 | $3,840–$5,280 |
| Timber slat / horizontal slat screenscreen, front, dividingNational range (few local prices yet) | $250–$450/m | $12,400–$22,320 | $24,800–$44,640 | $4,800–$8,640 |
| Frameless glasspoolNational range (few local prices yet) | $280–$700+/m | $13,640–$34,720+ | $27,280–$69,440+ | $5,280–$13,440+ |
| Wrought iron / cast ironfrontNational range (few local prices yet) | $450–$1,000/m | $22,320–$49,600 | $44,640–$99,200 | $8,640–$19,200 |
| Brick, stone or rendered masonryfront, dividingNational range (few local prices yet) | $500–$1,200+/m | $24,800–$59,520+ | $49,600–$119,040+ | $9,600–$23,040+ |
| Sandstone and timberfrontNational range (few local prices yet) | $800–$1,200/m | $39,680–$59,520 | $79,360–$119,040 | $15,360–$23,040 |
Grey price-source rows use a state or national fallback. A national range is indicative and may have few local prices.
Old fence removal and disposal usually adds $20–$40 per metre, typically about $30. That’s around 20% of a typical Colorbond or paling price (usually 15–25%).
Rocky or hard ground usually adds $15–$45 per metre, typically about $25. That’s around 15% of a typical Colorbond or paling rate (usually 10–25%). Very hard ground sits at the high end.
A plinth or sleeper under the fence, for a small level change or to close the gap at the bottom, usually adds $10–$30 per metre, typically about $20.
Slopes, retaining, trees and tight access are confirmed by your fencer. Extras are calculated separately and do not compound.
Tweed fence rules · Read the full rules
A treated pine paling fence is $150–$180/m. Your typical 50/50 share for 99.2 m is $7,440–$8,830.
Neighbours generally split a sufficient dividing fence 50/50. If you want a higher standard, you pay the extra.
Up to 1.2 m in most residential zones without approval. A higher front fence needs a complying development certificate or a DA.
Yes. Removal is an optional per-metre extra. The fencer confirms the final cost and any licensed asbestos work.
Block-size source: NSW Cadastre (Lot layer) and NSW Administrative Boundaries (Suburb, LGA) © Spatial Services, NSW Department of Customer Service (CC BY 4.0). Last updated 17 Nov 2026. Cadastre: Vicmap © Department of Transport and Planning (Vic), NSW Spatial Services, Queensland Government (QSpatial), theLIST © State of Tasmania and ACTmapi, used under CC BY 4.0. SA, WA and NT block sizes are typical-block assumptions.
Your typical 50/50 share in Upper Burringbar is $7,440–$8,830.
| Fencer | Fence | Height | Published rate | Source |
|---|---|---|---|---|
| No local source rows are published yet. | ||||
Price research is available in how we price.