Work out your fence
The block size is Median of 1786 house lots in Murwillumbah. The metres are an estimate; change them to match your property.
Murwillumbah 2484 · Tweed · New South Wales
A standard fence costs $150–$180/m installed. Your half of a typical dividing fence is about $6,850–$8,130.
Your 50/50 share · treated pine paling
$6,850–$8,130
91.3 m on a typical block · Wider-area fencers’ prices (3 fencers)
The block size is Median of 1786 house lots in Murwillumbah. The metres are an estimate; change them to match your property.
| Fence | Price per metre | Your 50/50 share | Whole dividing fence | Front fence |
|---|---|---|---|---|
| Treated pine palingMost commondividing, frontWider-area fencers’ prices (3 fencers) | $150–$180/m | $6,850–$8,130 | $13,700–$16,250 | $2,520–$2,990 |
| Colorbond steeldividing, frontWider-area fencers’ prices (3 fencers) | $120–$140/m | $5,390–$6,530 | $10,770–$13,060 | $1,980–$2,400 |
| Chain wire / chain linkdividingNational range (few local prices yet) | $30–$150/m | $1,370–$6,850 | $2,740–$13,700 | $500–$2,520 |
| PVC / vinylfront, dividingNational range (few local prices yet) | $40–$90/m | $1,830–$4,110 | $3,650–$8,220 | $670–$1,510 |
| Timber picketfrontNational range (few local prices yet) | $60–$350/m | $2,650–$15,980 | $5,300–$31,960 | $970–$5,880 |
| Aluminium slat / pool fencingpool, front, screen, dividingNational range (few local prices yet) | $80–$400/m | $3,650–$18,260 | $7,300–$36,520 | $1,340–$6,720 |
| Tubular metalfront, poolNational range (few local prices yet) | $180–$350/m | $8,220–$15,980 | $16,430–$31,960 | $3,020–$5,880 |
| Hardwood paling / lapped and cappeddividing, frontNSW median of fencers’ prices | $180–$320/m | $8,400–$14,430 | $16,800–$28,850 | $3,090–$5,310 |
| Semi-frameless glasspool, frontNational range (few local prices yet) | $200–$280/m | $9,130–$12,550 | $18,260–$25,110 | $3,360–$4,620 |
| Timber slat / horizontal slat screenscreen, front, dividingNational range (few local prices yet) | $250–$450/m | $11,410–$20,540 | $22,830–$41,090 | $4,200–$7,560 |
| Frameless glasspoolNational range (few local prices yet) | $280–$700+/m | $12,550–$31,960+ | $25,110–$63,910+ | $4,620–$11,760+ |
| Wrought iron / cast ironfrontNational range (few local prices yet) | $450–$1,000/m | $20,540–$45,650 | $41,090–$91,300 | $7,560–$16,800 |
| Brick, stone or rendered masonryfront, dividingNational range (few local prices yet) | $500–$1,200+/m | $22,830–$54,780+ | $45,650–$109,560+ | $8,400–$20,160+ |
| Sandstone and timberfrontNational range (few local prices yet) | $800–$1,200/m | $36,520–$54,780 | $73,040–$109,560 | $13,440–$20,160 |
Grey price-source rows use a state or national fallback. A national range is indicative and may have few local prices.
Old fence removal and disposal usually adds $20–$40 per metre, typically about $30. That’s around 20% of a typical Colorbond or paling price (usually 15–25%).
Rocky or hard ground usually adds $15–$45 per metre, typically about $25. That’s around 15% of a typical Colorbond or paling rate (usually 10–25%). Very hard ground sits at the high end.
A plinth or sleeper under the fence, for a small level change or to close the gap at the bottom, usually adds $10–$30 per metre, typically about $20.
Slopes, retaining, trees and tight access are confirmed by your fencer. Extras are calculated separately and do not compound.
Tweed fence rules · Read the full rules
A treated pine paling fence is $150–$180/m. Your typical 50/50 share for 91.3 m is $6,850–$8,130.
Neighbours generally split a sufficient dividing fence 50/50. If you want a higher standard, you pay the extra.
Up to 1.2 m in most residential zones without approval. A higher front fence needs a complying development certificate or a DA.
Yes. Removal is an optional per-metre extra. The fencer confirms the final cost and any licensed asbestos work.
Block-size source: NSW Cadastre (Lot layer) and NSW Administrative Boundaries (Suburb, LGA) © Spatial Services, NSW Department of Customer Service (CC BY 4.0). Last updated 17 Nov 2026. Cadastre: Vicmap © Department of Transport and Planning (Vic), NSW Spatial Services, Queensland Government (QSpatial), theLIST © State of Tasmania and ACTmapi, used under CC BY 4.0. SA, WA and NT block sizes are typical-block assumptions.
Your typical 50/50 share in Murwillumbah is $6,850–$8,130.
| Fencer | Fence | Height | Published rate | Source |
|---|---|---|---|---|
| No local source rows are published yet. | ||||
Price research is available in how we price.