Work out your fence
The block size is Median of 26 house lots in Uki. The metres are an estimate; change them to match your property.
Uki 2484 · Tweed · New South Wales
A standard fence costs $150–$180/m installed. Your half of a typical dividing fence is about $7,220–$8,560.
Your 50/50 share · treated pine paling
$7,220–$8,560
96.2 m on a typical block · Wider-area fencers’ prices (3 fencers)
The block size is Median of 26 house lots in Uki. The metres are an estimate; change them to match your property.
| Fence | Price per metre | Your 50/50 share | Whole dividing fence | Front fence |
|---|---|---|---|---|
| Treated pine palingMost commondividing, frontWider-area fencers’ prices (3 fencers) | $150–$180/m | $7,220–$8,560 | $14,430–$17,120 | $2,820–$3,350 |
| Colorbond steeldividing, frontWider-area fencers’ prices (3 fencers) | $120–$140/m | $5,680–$6,880 | $11,350–$13,760 | $2,220–$2,690 |
| Chain wire / chain linkdividingNational range (few local prices yet) | $30–$150/m | $1,440–$7,220 | $2,890–$14,430 | $560–$2,820 |
| PVC / vinylfront, dividingNational range (few local prices yet) | $40–$90/m | $1,920–$4,330 | $3,850–$8,660 | $750–$1,690 |
| Timber picketfrontNational range (few local prices yet) | $60–$350/m | $2,790–$16,840 | $5,580–$33,670 | $1,090–$6,580 |
| Aluminium slat / pool fencingpool, front, screen, dividingNational range (few local prices yet) | $80–$400/m | $3,850–$19,240 | $7,700–$38,480 | $1,500–$7,520 |
| Tubular metalfront, poolNational range (few local prices yet) | $180–$350/m | $8,660–$16,840 | $17,320–$33,670 | $3,380–$6,580 |
| Hardwood paling / lapped and cappeddividing, frontNSW median of fencers’ prices | $180–$320/m | $8,850–$15,200 | $17,700–$30,400 | $3,460–$5,940 |
| Semi-frameless glasspool, frontNational range (few local prices yet) | $200–$280/m | $9,620–$13,230 | $19,240–$26,460 | $3,760–$5,170 |
| Timber slat / horizontal slat screenscreen, front, dividingNational range (few local prices yet) | $250–$450/m | $12,030–$21,650 | $24,050–$43,290 | $4,700–$8,460 |
| Frameless glasspoolNational range (few local prices yet) | $280–$700+/m | $13,230–$33,670+ | $26,460–$67,340+ | $5,170–$13,160+ |
| Wrought iron / cast ironfrontNational range (few local prices yet) | $450–$1,000/m | $21,650–$48,100 | $43,290–$96,200 | $8,460–$18,800 |
| Brick, stone or rendered masonryfront, dividingNational range (few local prices yet) | $500–$1,200+/m | $24,050–$57,720+ | $48,100–$115,440+ | $9,400–$22,560+ |
| Sandstone and timberfrontNational range (few local prices yet) | $800–$1,200/m | $38,480–$57,720 | $76,960–$115,440 | $15,040–$22,560 |
Grey price-source rows use a state or national fallback. A national range is indicative and may have few local prices.
Old fence removal and disposal usually adds $20–$40 per metre, typically about $30. That’s around 20% of a typical Colorbond or paling price (usually 15–25%).
Rocky or hard ground usually adds $15–$45 per metre, typically about $25. That’s around 15% of a typical Colorbond or paling rate (usually 10–25%). Very hard ground sits at the high end.
A plinth or sleeper under the fence, for a small level change or to close the gap at the bottom, usually adds $10–$30 per metre, typically about $20.
Slopes, retaining, trees and tight access are confirmed by your fencer. Extras are calculated separately and do not compound.
Tweed fence rules · Read the full rules
A treated pine paling fence is $150–$180/m. Your typical 50/50 share for 96.2 m is $7,220–$8,560.
Neighbours generally split a sufficient dividing fence 50/50. If you want a higher standard, you pay the extra.
Up to 1.2 m in most residential zones without approval. A higher front fence needs a complying development certificate or a DA.
Yes. Removal is an optional per-metre extra. The fencer confirms the final cost and any licensed asbestos work.
The property owner usually pays the full cost. About 27% of local lots have a laneway.
Block-size source: NSW Cadastre (Lot layer) and NSW Administrative Boundaries (Suburb, LGA) © Spatial Services, NSW Department of Customer Service (CC BY 4.0). Last updated 17 Nov 2026. Cadastre: Vicmap © Department of Transport and Planning (Vic), NSW Spatial Services, Queensland Government (QSpatial), theLIST © State of Tasmania and ACTmapi, used under CC BY 4.0. SA, WA and NT block sizes are typical-block assumptions.
Your typical 50/50 share in Uki is $7,220–$8,560.
| Fencer | Fence | Height | Published rate | Source |
|---|---|---|---|---|
| No local source rows are published yet. | ||||
Price research is available in how we price.