Work out your fence
The block size is Median of 20 house lots in Terara. The metres are an estimate; change them to match your property.
Terara 2540 · Shoalhaven · New South Wales
A standard fence costs $150–$200/m installed. Your half of a typical dividing fence is about $6,980–$9,430.
Your 50/50 share · treated pine paling
$6,980–$9,430
94.3 m on a typical block · NSW median of fencers’ prices
The block size is Median of 20 house lots in Terara. The metres are an estimate; change them to match your property.
| Fence | Price per metre | Your 50/50 share | Whole dividing fence | Front fence |
|---|---|---|---|---|
| Treated pine palingMost commondividing, frontNSW median of fencers’ prices | $150–$200/m | $6,980–$9,430 | $13,960–$18,860 | $2,310–$3,120 |
| Colorbond steeldividing, frontNSW median of fencers’ prices | $130–$160/m | $5,890–$7,450 | $11,790–$14,900 | $1,950–$2,460 |
| Chain wire / chain linkdividingNational range (few local prices yet) | $30–$150/m | $1,410–$7,070 | $2,830–$14,150 | $470–$2,340 |
| PVC / vinylfront, dividingNational range (few local prices yet) | $40–$90/m | $1,890–$4,240 | $3,770–$8,490 | $620–$1,400 |
| Timber picketfrontNational range (few local prices yet) | $60–$350/m | $2,730–$16,500 | $5,470–$33,010 | $900–$5,460 |
| Aluminium slat / pool fencingpool, front, screen, dividingNational range (few local prices yet) | $80–$400/m | $3,770–$18,860 | $7,540–$37,720 | $1,250–$6,240 |
| Tubular metalfront, poolNational range (few local prices yet) | $180–$350/m | $8,490–$16,500 | $16,970–$33,010 | $2,810–$5,460 |
| Hardwood paling / lapped and cappeddividing, frontNSW median of fencers’ prices | $180–$320/m | $8,680–$14,900 | $17,350–$29,800 | $2,870–$4,930 |
| Semi-frameless glasspool, frontNational range (few local prices yet) | $200–$280/m | $9,430–$12,970 | $18,860–$25,930 | $3,120–$4,290 |
| Timber slat / horizontal slat screenscreen, front, dividingNational range (few local prices yet) | $250–$450/m | $11,790–$21,220 | $23,580–$42,440 | $3,900–$7,020 |
| Frameless glasspoolNational range (few local prices yet) | $280–$700+/m | $12,970–$33,010+ | $25,930–$66,010+ | $4,290–$10,920+ |
| Wrought iron / cast ironfrontNational range (few local prices yet) | $450–$1,000/m | $21,220–$47,150 | $42,440–$94,300 | $7,020–$15,600 |
| Brick, stone or rendered masonryfront, dividingNational range (few local prices yet) | $500–$1,200+/m | $23,580–$56,580+ | $47,150–$113,160+ | $7,800–$18,720+ |
| Sandstone and timberfrontNational range (few local prices yet) | $800–$1,200/m | $37,720–$56,580 | $75,440–$113,160 | $12,480–$18,720 |
Grey price-source rows use a state or national fallback. A national range is indicative and may have few local prices.
Old fence removal and disposal usually adds $20–$40 per metre, typically about $30. That’s around 20% of a typical Colorbond or paling price (usually 15–25%).
Rocky or hard ground usually adds $15–$45 per metre, typically about $25. That’s around 15% of a typical Colorbond or paling rate (usually 10–25%). Very hard ground sits at the high end.
A plinth or sleeper under the fence, for a small level change or to close the gap at the bottom, usually adds $10–$30 per metre, typically about $20.
Slopes, retaining, trees and tight access are confirmed by your fencer. Extras are calculated separately and do not compound.
Shoalhaven fence rules · Read the full rules
A treated pine paling fence is $150–$200/m. Your typical 50/50 share for 94.3 m is $6,980–$9,430.
Neighbours generally split a sufficient dividing fence 50/50. If you want a higher standard, you pay the extra.
Up to 1.2 m in most residential zones without approval. A higher front fence needs a complying development certificate or a DA.
Yes. Removal is an optional per-metre extra. The fencer confirms the final cost and any licensed asbestos work.
Block-size source: NSW Cadastre (Lot layer) and NSW Administrative Boundaries (Suburb, LGA) © Spatial Services, NSW Department of Customer Service (CC BY 4.0). Last updated 17 Nov 2026. Cadastre: Vicmap © Department of Transport and Planning (Vic), NSW Spatial Services, Queensland Government (QSpatial), theLIST © State of Tasmania and ACTmapi, used under CC BY 4.0. SA, WA and NT block sizes are typical-block assumptions.
Your typical 50/50 share in Terara is $6,980–$9,430.
| Fencer | Fence | Height | Published rate | Source |
|---|---|---|---|---|
| No local source rows are published yet. | ||||
Price research is available in how we price.