Work out your fence
The block size is Median of 3732 house lots in Sanctuary Point. The metres are an estimate; change them to match your property.
Sanctuary Point 2540 · Shoalhaven · New South Wales
A standard fence costs $150–$200/m installed. Your half of a typical dividing fence is about $7,010–$9,470.
Your 50/50 share · treated pine paling
$7,010–$9,470
94.7 m on a typical block · NSW median of fencers’ prices
The block size is Median of 3732 house lots in Sanctuary Point. The metres are an estimate; change them to match your property.
| Fence | Price per metre | Your 50/50 share | Whole dividing fence | Front fence |
|---|---|---|---|---|
| Treated pine palingMost commondividing, frontNSW median of fencers’ prices | $150–$200/m | $7,010–$9,470 | $14,020–$18,940 | $2,250–$3,040 |
| Colorbond steeldividing, frontNSW median of fencers’ prices | $130–$160/m | $5,920–$7,480 | $11,840–$14,960 | $1,900–$2,400 |
| Chain wire / chain linkdividingNational range (few local prices yet) | $30–$150/m | $1,420–$7,100 | $2,840–$14,210 | $460–$2,280 |
| PVC / vinylfront, dividingNational range (few local prices yet) | $40–$90/m | $1,890–$4,260 | $3,790–$8,520 | $610–$1,370 |
| Timber picketfrontNational range (few local prices yet) | $60–$350/m | $2,750–$16,570 | $5,490–$33,150 | $880–$5,320 |
| Aluminium slat / pool fencingpool, front, screen, dividingNational range (few local prices yet) | $80–$400/m | $3,790–$18,940 | $7,580–$37,880 | $1,220–$6,080 |
| Tubular metalfront, poolNational range (few local prices yet) | $180–$350/m | $8,520–$16,570 | $17,050–$33,150 | $2,740–$5,320 |
| Hardwood paling / lapped and cappeddividing, frontNSW median of fencers’ prices | $180–$320/m | $8,710–$14,960 | $17,420–$29,930 | $2,800–$4,800 |
| Semi-frameless glasspool, frontNational range (few local prices yet) | $200–$280/m | $9,470–$13,020 | $18,940–$26,040 | $3,040–$4,180 |
| Timber slat / horizontal slat screenscreen, front, dividingNational range (few local prices yet) | $250–$450/m | $11,840–$21,310 | $23,680–$42,620 | $3,800–$6,840 |
| Frameless glasspoolNational range (few local prices yet) | $280–$700+/m | $13,020–$33,150+ | $26,040–$66,290+ | $4,180–$10,640+ |
| Wrought iron / cast ironfrontNational range (few local prices yet) | $450–$1,000/m | $21,310–$47,350 | $42,620–$94,700 | $6,840–$15,200 |
| Brick, stone or rendered masonryfront, dividingNational range (few local prices yet) | $500–$1,200+/m | $23,680–$56,820+ | $47,350–$113,640+ | $7,600–$18,240+ |
| Sandstone and timberfrontNational range (few local prices yet) | $800–$1,200/m | $37,880–$56,820 | $75,760–$113,640 | $12,160–$18,240 |
Grey price-source rows use a state or national fallback. A national range is indicative and may have few local prices.
Old fence removal and disposal usually adds $20–$40 per metre, typically about $30. That’s around 20% of a typical Colorbond or paling price (usually 15–25%).
Rocky or hard ground usually adds $15–$45 per metre, typically about $25. That’s around 15% of a typical Colorbond or paling rate (usually 10–25%). Very hard ground sits at the high end.
A plinth or sleeper under the fence, for a small level change or to close the gap at the bottom, usually adds $10–$30 per metre, typically about $20.
Slopes, retaining, trees and tight access are confirmed by your fencer. Extras are calculated separately and do not compound.
Shoalhaven fence rules · Read the full rules
A treated pine paling fence is $150–$200/m. Your typical 50/50 share for 94.7 m is $7,010–$9,470.
Neighbours generally split a sufficient dividing fence 50/50. If you want a higher standard, you pay the extra.
Up to 1.2 m in most residential zones without approval. A higher front fence needs a complying development certificate or a DA.
Yes. Removal is an optional per-metre extra. The fencer confirms the final cost and any licensed asbestos work.
Block-size source: NSW Cadastre (Lot layer) and NSW Administrative Boundaries (Suburb, LGA) © Spatial Services, NSW Department of Customer Service (CC BY 4.0). Last updated 17 Nov 2026. Cadastre: Vicmap © Department of Transport and Planning (Vic), NSW Spatial Services, Queensland Government (QSpatial), theLIST © State of Tasmania and ACTmapi, used under CC BY 4.0. SA, WA and NT block sizes are typical-block assumptions.
Your typical 50/50 share in Sanctuary Point is $7,010–$9,470.
| Fencer | Fence | Height | Published rate | Source |
|---|---|---|---|---|
| No local source rows are published yet. | ||||
Price research is available in how we price.