Work out your fence
The block size is the median of 1 house lots in Tapitallee. The metres are an estimate; change them to match your property.
Tapitallee 2540 · Shoalhaven · New South Wales
A standard fence costs $150–$200/m installed. Your half of a typical dividing fence is about $6,190–$8,370.
Your 50/50 share · treated pine paling
$6,190–$8,370
83.7 m on a typical block · NSW median of fencers’ prices
The block size is the median of 1 house lots in Tapitallee. The metres are an estimate; change them to match your property.
| Fence | Per metre | Your share | Whole fence | Front fence |
|---|---|---|---|---|
| Treated pine palingMost commondividing, frontNSW median of fencers’ prices | $150–$200/m | $6,190–$8,370 | $12,390–$16,740 | $3,610–$4,880 |
| Colorbond steeldividing, frontNSW median of fencers’ prices | $130–$160/m | $5,230–$6,610 | $10,460–$13,220 | $3,050–$3,860 |
| Chain wire / chain linkdividingNational price | $30–$150/m | $1,260–$6,280 | $2,510–$12,560 | $730–$3,660 |
| PVC / vinylfront, dividingNational price | $40–$90/m | $1,670–$3,770 | $3,350–$7,530 | $980–$2,200 |
| Timber picketfrontNational price | $60–$350/m | $2,430–$14,650 | $4,850–$29,300 | $1,420–$8,540 |
| Aluminium slat / pool fencingpool, front, screen, dividingNational price | $80–$400/m | $3,350–$16,740 | $6,700–$33,480 | $1,950–$9,760 |
| Tubular metalfront, poolNational price | $180–$350/m | $7,530–$14,650 | $15,070–$29,300 | $4,390–$8,540 |
| Hardwood paling / lapped and cappeddividing, frontNSW median of fencers’ prices | $180–$320/m | $7,700–$13,220 | $15,400–$26,450 | $4,490–$7,710 |
| Semi-frameless glasspool, frontNational price | $200–$280/m | $8,370–$11,510 | $16,740–$23,020 | $4,880–$6,710 |
| Timber slat / horizontal slat screenscreen, front, dividingNational price | $250–$450/m | $10,460–$18,830 | $20,930–$37,670 | $6,100–$10,980 |
| Frameless glasspoolNational price | $280–$700+/m | $11,510–$29,300+ | $23,020–$58,590+ | $6,710–$17,080+ |
| Wrought iron / cast ironfrontNational price | $450–$1,000/m | $18,830–$41,850 | $37,670–$83,700 | $10,980–$24,400 |
| Brick, stone or rendered masonryfront, dividingNational price | $500–$1,200+/m | $20,930–$50,220+ | $41,850–$100,440+ | $12,200–$29,280+ |
| Sandstone and timberfrontNational price | $800–$1,200/m | $33,480–$50,220 | $66,960–$100,440 | $19,520–$29,280 |
Rows marked National price use the national range because we have fewer than 2 local fencer prices for that type. See published prices.
Old fence removal and disposal usually adds $20–$40 per metre, typically about $30. That’s around 20% of a typical Colorbond or paling price (usually 15–25%).
Rocky or hard ground usually adds $15–$45 per metre, typically about $25. That’s around 15% of a typical Colorbond or paling rate (usually 10–25%). Very hard ground sits at the high end.
A plinth or sleeper under the fence, for a small level change or to close the gap at the bottom, usually adds $10–$30 per metre, typically about $20.
Slopes, retaining, trees and tight access are confirmed by your fencer. Extras are calculated separately and do not compound.
Shoalhaven fence rules · Read the full rules
A treated pine paling fence is $150–$200/m. Your typical 50/50 share for 83.7 m is $6,190–$8,370.
Neighbours generally split a sufficient dividing fence 50/50. If you want a higher standard, you pay the extra.
Up to 1.2 m in most residential zones without approval. A higher front fence needs a complying development certificate or a DA.
Yes. Removal is an optional per-metre extra. The fencer confirms the final cost and any licensed asbestos work.
Block-size source: NSW Cadastre (Lot layer) and NSW Administrative Boundaries (Suburb, LGA) © Spatial Services, NSW Department of Customer Service (CC BY 4.0). Last updated 17 Nov 2026. Cadastre: Vicmap © Department of Transport and Planning (Vic), NSW Spatial Services, Queensland Government (QSpatial), theLIST © State of Tasmania and ACTmapi, used under CC BY 4.0. SA, WA and NT block sizes are typical-block assumptions.
Your typical 50/50 share in Tapitallee is $6,190–$8,370.