Work out your fence
The block size is Median of 78 house lots in Swanhaven. The metres are an estimate; change them to match your property.
Swanhaven 2540 · Shoalhaven · New South Wales
A standard fence costs $150–$200/m installed. Your half of a typical dividing fence is about $7,310–$9,880.
Your 50/50 share · treated pine paling
$7,310–$9,880
98.8 m on a typical block · NSW median of fencers’ prices
The block size is Median of 78 house lots in Swanhaven. The metres are an estimate; change them to match your property.
| Fence | Price per metre | Your 50/50 share | Whole dividing fence | Front fence |
|---|---|---|---|---|
| Treated pine palingMost commondividing, frontNSW median of fencers’ prices | $150–$200/m | $7,310–$9,880 | $14,620–$19,760 | $2,710–$3,660 |
| Colorbond steeldividing, frontNSW median of fencers’ prices | $130–$160/m | $6,180–$7,810 | $12,350–$15,610 | $2,290–$2,890 |
| Chain wire / chain linkdividingNational range (few local prices yet) | $30–$150/m | $1,480–$7,410 | $2,960–$14,820 | $550–$2,750 |
| PVC / vinylfront, dividingNational range (few local prices yet) | $40–$90/m | $1,980–$4,450 | $3,950–$8,890 | $730–$1,650 |
| Timber picketfrontNational range (few local prices yet) | $60–$350/m | $2,870–$17,290 | $5,730–$34,580 | $1,060–$6,410 |
| Aluminium slat / pool fencingpool, front, screen, dividingNational range (few local prices yet) | $80–$400/m | $3,950–$19,760 | $7,900–$39,520 | $1,460–$7,320 |
| Tubular metalfront, poolNational range (few local prices yet) | $180–$350/m | $8,890–$17,290 | $17,780–$34,580 | $3,290–$6,410 |
| Hardwood paling / lapped and cappeddividing, frontNSW median of fencers’ prices | $180–$320/m | $9,090–$15,610 | $18,180–$31,220 | $3,370–$5,780 |
| Semi-frameless glasspool, frontNational range (few local prices yet) | $200–$280/m | $9,880–$13,590 | $19,760–$27,170 | $3,660–$5,030 |
| Timber slat / horizontal slat screenscreen, front, dividingNational range (few local prices yet) | $250–$450/m | $12,350–$22,230 | $24,700–$44,460 | $4,580–$8,240 |
| Frameless glasspoolNational range (few local prices yet) | $280–$700+/m | $13,590–$34,580+ | $27,170–$69,160+ | $5,030–$12,810+ |
| Wrought iron / cast ironfrontNational range (few local prices yet) | $450–$1,000/m | $22,230–$49,400 | $44,460–$98,800 | $8,240–$18,300 |
| Brick, stone or rendered masonryfront, dividingNational range (few local prices yet) | $500–$1,200+/m | $24,700–$59,280+ | $49,400–$118,560+ | $9,150–$21,960+ |
| Sandstone and timberfrontNational range (few local prices yet) | $800–$1,200/m | $39,520–$59,280 | $79,040–$118,560 | $14,640–$21,960 |
Grey price-source rows use a state or national fallback. A national range is indicative and may have few local prices.
Old fence removal and disposal usually adds $20–$40 per metre, typically about $30. That’s around 20% of a typical Colorbond or paling price (usually 15–25%).
Rocky or hard ground usually adds $15–$45 per metre, typically about $25. That’s around 15% of a typical Colorbond or paling rate (usually 10–25%). Very hard ground sits at the high end.
A plinth or sleeper under the fence, for a small level change or to close the gap at the bottom, usually adds $10–$30 per metre, typically about $20.
Slopes, retaining, trees and tight access are confirmed by your fencer. Extras are calculated separately and do not compound.
Shoalhaven fence rules · Read the full rules
A treated pine paling fence is $150–$200/m. Your typical 50/50 share for 98.8 m is $7,310–$9,880.
Neighbours generally split a sufficient dividing fence 50/50. If you want a higher standard, you pay the extra.
Up to 1.2 m in most residential zones without approval. A higher front fence needs a complying development certificate or a DA.
Yes. Removal is an optional per-metre extra. The fencer confirms the final cost and any licensed asbestos work.
Block-size source: NSW Cadastre (Lot layer) and NSW Administrative Boundaries (Suburb, LGA) © Spatial Services, NSW Department of Customer Service (CC BY 4.0). Last updated 17 Nov 2026. Cadastre: Vicmap © Department of Transport and Planning (Vic), NSW Spatial Services, Queensland Government (QSpatial), theLIST © State of Tasmania and ACTmapi, used under CC BY 4.0. SA, WA and NT block sizes are typical-block assumptions.
Your typical 50/50 share in Swanhaven is $7,310–$9,880.
| Fencer | Fence | Height | Published rate | Source |
|---|---|---|---|---|
| No local source rows are published yet. | ||||
Price research is available in how we price.