Work out your fence
The block size is the median of 854 house lots in St Georges Basin. The metres are an estimate; change them to match your property.
St Georges Basin 2540 · Shoalhaven · New South Wales
A standard fence costs $150–$200/m installed. Your half of a typical dividing fence is about $7,100–$9,600.
Your 50/50 share · treated pine paling
$7,100–$9,600
96 m on a typical block · NSW median of fencers’ prices
The block size is the median of 854 house lots in St Georges Basin. The metres are an estimate; change them to match your property.
| Fence | Per metre | Your share | Whole fence | Front fence |
|---|---|---|---|---|
| Treated pine palingMost commondividing, frontNSW median of fencers’ prices | $150–$200/m | $7,100–$9,600 | $14,210–$19,200 | $2,460–$3,320 |
| Colorbond steeldividing, frontNSW median of fencers’ prices | $130–$160/m | $6,000–$7,580 | $12,000–$15,170 | $2,080–$2,620 |
| Chain wire / chain linkdividingNational price | $30–$150/m | $1,440–$7,200 | $2,880–$14,400 | $500–$2,490 |
| PVC / vinylfront, dividingNational price | $40–$90/m | $1,920–$4,320 | $3,840–$8,640 | $660–$1,490 |
| Timber picketfrontNational price | $60–$350/m | $2,780–$16,800 | $5,570–$33,600 | $960–$5,810 |
| Aluminium slat / pool fencingpool, front, screen, dividingNational price | $80–$400/m | $3,840–$19,200 | $7,680–$38,400 | $1,330–$6,640 |
| Tubular metalfront, poolNational price | $180–$350/m | $8,640–$16,800 | $17,280–$33,600 | $2,990–$5,810 |
| Hardwood paling / lapped and cappeddividing, frontNSW median of fencers’ prices | $180–$320/m | $8,830–$15,170 | $17,660–$30,340 | $3,050–$5,250 |
| Semi-frameless glasspool, frontNational price | $200–$280/m | $9,600–$13,200 | $19,200–$26,400 | $3,320–$4,570 |
| Timber slat / horizontal slat screenscreen, front, dividingNational price | $250–$450/m | $12,000–$21,600 | $24,000–$43,200 | $4,150–$7,470 |
| Frameless glasspoolNational price | $280–$700+/m | $13,200–$33,600+ | $26,400–$67,200+ | $4,570–$11,620+ |
| Wrought iron / cast ironfrontNational price | $450–$1,000/m | $21,600–$48,000 | $43,200–$96,000 | $7,470–$16,600 |
| Brick, stone or rendered masonryfront, dividingNational price | $500–$1,200+/m | $24,000–$57,600+ | $48,000–$115,200+ | $8,300–$19,920+ |
| Sandstone and timberfrontNational price | $800–$1,200/m | $38,400–$57,600 | $76,800–$115,200 | $13,280–$19,920 |
Rows marked National price use the national range because we have fewer than 2 local fencer prices for that type. See published prices.
Old fence removal and disposal usually adds $20–$40 per metre, typically about $30. That’s around 20% of a typical Colorbond or paling price (usually 15–25%).
Rocky or hard ground usually adds $15–$45 per metre, typically about $25. That’s around 15% of a typical Colorbond or paling rate (usually 10–25%). Very hard ground sits at the high end.
A plinth or sleeper under the fence, for a small level change or to close the gap at the bottom, usually adds $10–$30 per metre, typically about $20.
Slopes, retaining, trees and tight access are confirmed by your fencer. Extras are calculated separately and do not compound.
Shoalhaven fence rules · Read the full rules
A treated pine paling fence is $150–$200/m. Your typical 50/50 share for 96 m is $7,100–$9,600.
Neighbours generally split a sufficient dividing fence 50/50. If you want a higher standard, you pay the extra.
Up to 1.2 m in most residential zones without approval. A higher front fence needs a complying development certificate or a DA.
Yes. Removal is an optional per-metre extra. The fencer confirms the final cost and any licensed asbestos work.
Block-size source: NSW Cadastre (Lot layer) and NSW Administrative Boundaries (Suburb, LGA) © Spatial Services, NSW Department of Customer Service (CC BY 4.0). Last updated 17 Nov 2026. Cadastre: Vicmap © Department of Transport and Planning (Vic), NSW Spatial Services, Queensland Government (QSpatial), theLIST © State of Tasmania and ACTmapi, used under CC BY 4.0. SA, WA and NT block sizes are typical-block assumptions.
Your typical 50/50 share in St Georges Basin is $7,100–$9,600.