Work out your fence
The block size is Median of 1 house lots in Pumpenbil. The metres are an estimate; change them to match your property.
Pumpenbil 2484 · Tweed · New South Wales
A standard fence costs $150–$180/m installed. Your half of a typical dividing fence is about $9,050–$10,730.
Your 50/50 share · treated pine paling
$9,050–$10,730
120.6 m on a typical block · Wider-area fencers’ prices (3 fencers)
The block size is Median of 1 house lots in Pumpenbil. The metres are an estimate; change them to match your property.
| Fence | Price per metre | Your 50/50 share | Whole dividing fence | Front fence |
|---|---|---|---|---|
| Treated pine palingMost commondividing, frontWider-area fencers’ prices (3 fencers) | $150–$180/m | $9,050–$10,730 | $18,090–$21,470 | $3,020–$3,580 |
| Colorbond steeldividing, frontWider-area fencers’ prices (3 fencers) | $120–$140/m | $7,120–$8,620 | $14,230–$17,250 | $2,370–$2,870 |
| Chain wire / chain linkdividingNational range (few local prices yet) | $30–$150/m | $1,810–$9,050 | $3,620–$18,090 | $600–$3,020 |
| PVC / vinylfront, dividingNational range (few local prices yet) | $40–$90/m | $2,410–$5,430 | $4,820–$10,850 | $800–$1,810 |
| Timber picketfrontNational range (few local prices yet) | $60–$350/m | $3,500–$21,110 | $6,990–$42,210 | $1,170–$7,040 |
| Aluminium slat / pool fencingpool, front, screen, dividingNational range (few local prices yet) | $80–$400/m | $4,820–$24,120 | $9,650–$48,240 | $1,610–$8,040 |
| Tubular metalfront, poolNational range (few local prices yet) | $180–$350/m | $10,850–$21,110 | $21,710–$42,210 | $3,620–$7,040 |
| Hardwood paling / lapped and cappeddividing, frontNSW median of fencers’ prices | $180–$320/m | $11,100–$19,050 | $22,190–$38,110 | $3,700–$6,350 |
| Semi-frameless glasspool, frontNational range (few local prices yet) | $200–$280/m | $12,060–$16,580 | $24,120–$33,170 | $4,020–$5,530 |
| Timber slat / horizontal slat screenscreen, front, dividingNational range (few local prices yet) | $250–$450/m | $15,080–$27,140 | $30,150–$54,270 | $5,030–$9,050 |
| Frameless glasspoolNational range (few local prices yet) | $280–$700+/m | $16,580–$42,210+ | $33,170–$84,420+ | $5,530–$14,070+ |
| Wrought iron / cast ironfrontNational range (few local prices yet) | $450–$1,000/m | $27,140–$60,300 | $54,270–$120,600 | $9,050–$20,100 |
| Brick, stone or rendered masonryfront, dividingNational range (few local prices yet) | $500–$1,200+/m | $30,150–$72,360+ | $60,300–$144,720+ | $10,050–$24,120+ |
| Sandstone and timberfrontNational range (few local prices yet) | $800–$1,200/m | $48,240–$72,360 | $96,480–$144,720 | $16,080–$24,120 |
Grey price-source rows use a state or national fallback. A national range is indicative and may have few local prices.
Old fence removal and disposal usually adds $20–$40 per metre, typically about $30. That’s around 20% of a typical Colorbond or paling price (usually 15–25%).
Rocky or hard ground usually adds $15–$45 per metre, typically about $25. That’s around 15% of a typical Colorbond or paling rate (usually 10–25%). Very hard ground sits at the high end.
A plinth or sleeper under the fence, for a small level change or to close the gap at the bottom, usually adds $10–$30 per metre, typically about $20.
Slopes, retaining, trees and tight access are confirmed by your fencer. Extras are calculated separately and do not compound.
Tweed fence rules · Read the full rules
A treated pine paling fence is $150–$180/m. Your typical 50/50 share for 120.6 m is $9,050–$10,730.
Neighbours generally split a sufficient dividing fence 50/50. If you want a higher standard, you pay the extra.
Up to 1.2 m in most residential zones without approval. A higher front fence needs a complying development certificate or a DA.
Yes. Removal is an optional per-metre extra. The fencer confirms the final cost and any licensed asbestos work.
Block-size source: NSW Cadastre (Lot layer) and NSW Administrative Boundaries (Suburb, LGA) © Spatial Services, NSW Department of Customer Service (CC BY 4.0). Last updated 17 Nov 2026. Cadastre: Vicmap © Department of Transport and Planning (Vic), NSW Spatial Services, Queensland Government (QSpatial), theLIST © State of Tasmania and ACTmapi, used under CC BY 4.0. SA, WA and NT block sizes are typical-block assumptions.
Your typical 50/50 share in Pumpenbil is $9,050–$10,730.
| Fencer | Fence | Height | Published rate | Source |
|---|---|---|---|---|
| No local source rows are published yet. | ||||
Price research is available in how we price.