Work out your fence
The block size is Median of 29 house lots in Penrose. The metres are an estimate; change them to match your property.
Penrose 2579 · Wingecarribee · New South Wales
A standard fence costs $150–$200/m installed. Your half of a typical dividing fence is about $9,390–$12,690.
Your 50/50 share · treated pine paling
$9,390–$12,690
126.9 m on a typical block · NSW median of fencers’ prices
The block size is Median of 29 house lots in Penrose. The metres are an estimate; change them to match your property.
| Fence | Price per metre | Your 50/50 share | Whole dividing fence | Front fence |
|---|---|---|---|---|
| Treated pine palingMost commondividing, frontNSW median of fencers’ prices | $150–$200/m | $9,390–$12,690 | $18,780–$25,380 | $2,440–$3,300 |
| Colorbond steeldividing, frontNSW median of fencers’ prices | $130–$160/m | $7,930–$10,030 | $15,860–$20,050 | $2,060–$2,610 |
| Chain wire / chain linkdividingNational range (few local prices yet) | $30–$150/m | $1,900–$9,520 | $3,810–$19,040 | $500–$2,480 |
| PVC / vinylfront, dividingNational range (few local prices yet) | $40–$90/m | $2,540–$5,710 | $5,080–$11,420 | $660–$1,490 |
| Timber picketfrontNational range (few local prices yet) | $60–$350/m | $3,680–$22,210 | $7,360–$44,420 | $960–$5,780 |
| Aluminium slat / pool fencingpool, front, screen, dividingNational range (few local prices yet) | $80–$400/m | $5,080–$25,380 | $10,150–$50,760 | $1,320–$6,600 |
| Tubular metalfront, poolNational range (few local prices yet) | $180–$350/m | $11,420–$22,210 | $22,840–$44,420 | $2,970–$5,780 |
| Hardwood paling / lapped and cappeddividing, frontNSW median of fencers’ prices | $180–$320/m | $11,670–$20,050 | $23,350–$40,100 | $3,040–$5,210 |
| Semi-frameless glasspool, frontNational range (few local prices yet) | $200–$280/m | $12,690–$17,450 | $25,380–$34,900 | $3,300–$4,540 |
| Timber slat / horizontal slat screenscreen, front, dividingNational range (few local prices yet) | $250–$450/m | $15,860–$28,550 | $31,730–$57,110 | $4,130–$7,430 |
| Frameless glasspoolNational range (few local prices yet) | $280–$700+/m | $17,450–$44,420+ | $34,900–$88,830+ | $4,540–$11,550+ |
| Wrought iron / cast ironfrontNational range (few local prices yet) | $450–$1,000/m | $28,550–$63,450 | $57,110–$126,900 | $7,430–$16,500 |
| Brick, stone or rendered masonryfront, dividingNational range (few local prices yet) | $500–$1,200+/m | $31,730–$76,140+ | $63,450–$152,280+ | $8,250–$19,800+ |
| Sandstone and timberfrontNational range (few local prices yet) | $800–$1,200/m | $50,760–$76,140 | $101,520–$152,280 | $13,200–$19,800 |
Grey price-source rows use a state or national fallback. A national range is indicative and may have few local prices.
Old fence removal and disposal usually adds $20–$40 per metre, typically about $30. That’s around 20% of a typical Colorbond or paling price (usually 15–25%).
Rocky or hard ground usually adds $15–$45 per metre, typically about $25. That’s around 15% of a typical Colorbond or paling rate (usually 10–25%). Very hard ground sits at the high end.
A plinth or sleeper under the fence, for a small level change or to close the gap at the bottom, usually adds $10–$30 per metre, typically about $20.
Slopes, retaining, trees and tight access are confirmed by your fencer. Extras are calculated separately and do not compound.
Wingecarribee fence rules · Read the full rules
A treated pine paling fence is $150–$200/m. Your typical 50/50 share for 126.9 m is $9,390–$12,690.
Neighbours generally split a sufficient dividing fence 50/50. If you want a higher standard, you pay the extra.
Up to 1.2 m in most residential zones without approval. A higher front fence needs a complying development certificate or a DA.
Yes. Removal is an optional per-metre extra. The fencer confirms the final cost and any licensed asbestos work.
Block-size source: NSW Cadastre (Lot layer) and NSW Administrative Boundaries (Suburb, LGA) © Spatial Services, NSW Department of Customer Service (CC BY 4.0). Last updated 17 Nov 2026. Cadastre: Vicmap © Department of Transport and Planning (Vic), NSW Spatial Services, Queensland Government (QSpatial), theLIST © State of Tasmania and ACTmapi, used under CC BY 4.0. SA, WA and NT block sizes are typical-block assumptions.
Your typical 50/50 share in Penrose is $9,390–$12,690.
| Fencer | Fence | Height | Published rate | Source |
|---|---|---|---|---|
| No local source rows are published yet. | ||||
Price research is available in how we price.