Work out your fence
The block size is the median of 6 house lots in Paddys River. The metres are an estimate; change them to match your property.
Paddys River 2577 · Wingecarribee · New South Wales
A standard fence costs $150–$200/m installed. Your half of a typical dividing fence is about $5,410–$7,310.
Your 50/50 share · treated pine paling
$5,410–$7,310
73.1 m on a typical block · NSW median of fencers’ prices
The block size is the median of 6 house lots in Paddys River. The metres are an estimate; change them to match your property.
| Fence | Per metre | Your share | Whole fence | Front fence |
|---|---|---|---|---|
| Treated pine palingMost commondividing, frontNSW median of fencers’ prices | $150–$200/m | $5,410–$7,310 | $10,820–$14,620 | $3,090–$4,180 |
| Colorbond steeldividing, frontNSW median of fencers’ prices | $130–$160/m | $4,570–$5,770 | $9,140–$11,550 | $2,610–$3,300 |
| Chain wire / chain linkdividingNational price | $30–$150/m | $1,100–$5,480 | $2,190–$10,970 | $630–$3,140 |
| PVC / vinylfront, dividingNational price | $40–$90/m | $1,460–$3,290 | $2,920–$6,580 | $840–$1,880 |
| Timber picketfrontNational price | $60–$350/m | $2,120–$12,790 | $4,240–$25,580 | $1,210–$7,310 |
| Aluminium slat / pool fencingpool, front, screen, dividingNational price | $80–$400/m | $2,920–$14,620 | $5,850–$29,240 | $1,670–$8,360 |
| Tubular metalfront, poolNational price | $180–$350/m | $6,580–$12,790 | $13,160–$25,580 | $3,760–$7,310 |
| Hardwood paling / lapped and cappeddividing, frontNSW median of fencers’ prices | $180–$320/m | $6,730–$11,550 | $13,450–$23,100 | $3,850–$6,600 |
| Semi-frameless glasspool, frontNational price | $200–$280/m | $7,310–$10,050 | $14,620–$20,100 | $4,180–$5,750 |
| Timber slat / horizontal slat screenscreen, front, dividingNational price | $250–$450/m | $9,140–$16,450 | $18,280–$32,900 | $5,230–$9,410 |
| Frameless glasspoolNational price | $280–$700+/m | $10,050–$25,580+ | $20,100–$51,170+ | $5,750–$14,630+ |
| Wrought iron / cast ironfrontNational price | $450–$1,000/m | $16,450–$36,550 | $32,900–$73,100 | $9,410–$20,900 |
| Brick, stone or rendered masonryfront, dividingNational price | $500–$1,200+/m | $18,280–$43,860+ | $36,550–$87,720+ | $10,450–$25,080+ |
| Sandstone and timberfrontNational price | $800–$1,200/m | $29,240–$43,860 | $58,480–$87,720 | $16,720–$25,080 |
Rows marked National price use the national range because we have fewer than 2 local fencer prices for that type. See published prices.
Old fence removal and disposal usually adds $20–$40 per metre, typically about $30. That’s around 20% of a typical Colorbond or paling price (usually 15–25%).
Rocky or hard ground usually adds $15–$45 per metre, typically about $25. That’s around 15% of a typical Colorbond or paling rate (usually 10–25%). Very hard ground sits at the high end.
A plinth or sleeper under the fence, for a small level change or to close the gap at the bottom, usually adds $10–$30 per metre, typically about $20.
Slopes, retaining, trees and tight access are confirmed by your fencer. Extras are calculated separately and do not compound.
Wingecarribee fence rules · Read the full rules
A treated pine paling fence is $150–$200/m. Your typical 50/50 share for 73.1 m is $5,410–$7,310.
Neighbours generally split a sufficient dividing fence 50/50. If you want a higher standard, you pay the extra.
Up to 1.2 m in most residential zones without approval. A higher front fence needs a complying development certificate or a DA.
Yes. Removal is an optional per-metre extra. The fencer confirms the final cost and any licensed asbestos work.
Block-size source: NSW Cadastre (Lot layer) and NSW Administrative Boundaries (Suburb, LGA) © Spatial Services, NSW Department of Customer Service (CC BY 4.0). Last updated 17 Nov 2026. Cadastre: Vicmap © Department of Transport and Planning (Vic), NSW Spatial Services, Queensland Government (QSpatial), theLIST © State of Tasmania and ACTmapi, used under CC BY 4.0. SA, WA and NT block sizes are typical-block assumptions.
Your typical 50/50 share in Paddys River is $5,410–$7,310.