Work out your fence
The block size is Median of 395 house lots in Milton. The metres are an estimate; change them to match your property.
Milton 2538 · Shoalhaven · New South Wales
A standard fence costs $150–$200/m installed. Your half of a typical dividing fence is about $7,190–$9,710.
Your 50/50 share · treated pine paling
$7,190–$9,710
97.1 m on a typical block · NSW median of fencers’ prices
The block size is Median of 395 house lots in Milton. The metres are an estimate; change them to match your property.
| Fence | Price per metre | Your 50/50 share | Whole dividing fence | Front fence |
|---|---|---|---|---|
| Treated pine palingMost commondividing, frontNSW median of fencers’ prices | $150–$200/m | $7,190–$9,710 | $14,370–$19,420 | $2,580–$3,480 |
| Colorbond steeldividing, frontNSW median of fencers’ prices | $130–$160/m | $6,070–$7,670 | $12,140–$15,340 | $2,180–$2,750 |
| Chain wire / chain linkdividingNational range (few local prices yet) | $30–$150/m | $1,460–$7,280 | $2,910–$14,570 | $520–$2,610 |
| PVC / vinylfront, dividingNational range (few local prices yet) | $40–$90/m | $1,940–$4,370 | $3,880–$8,740 | $700–$1,570 |
| Timber picketfrontNational range (few local prices yet) | $60–$350/m | $2,820–$16,990 | $5,630–$33,990 | $1,010–$6,090 |
| Aluminium slat / pool fencingpool, front, screen, dividingNational range (few local prices yet) | $80–$400/m | $3,880–$19,420 | $7,770–$38,840 | $1,390–$6,960 |
| Tubular metalfront, poolNational range (few local prices yet) | $180–$350/m | $8,740–$16,990 | $17,480–$33,990 | $3,130–$6,090 |
| Hardwood paling / lapped and cappeddividing, frontNSW median of fencers’ prices | $180–$320/m | $8,930–$15,340 | $17,870–$30,680 | $3,200–$5,500 |
| Semi-frameless glasspool, frontNational range (few local prices yet) | $200–$280/m | $9,710–$13,350 | $19,420–$26,700 | $3,480–$4,790 |
| Timber slat / horizontal slat screenscreen, front, dividingNational range (few local prices yet) | $250–$450/m | $12,140–$21,850 | $24,280–$43,700 | $4,350–$7,830 |
| Frameless glasspoolNational range (few local prices yet) | $280–$700+/m | $13,350–$33,990+ | $26,700–$67,970+ | $4,790–$12,180+ |
| Wrought iron / cast ironfrontNational range (few local prices yet) | $450–$1,000/m | $21,850–$48,550 | $43,700–$97,100 | $7,830–$17,400 |
| Brick, stone or rendered masonryfront, dividingNational range (few local prices yet) | $500–$1,200+/m | $24,280–$58,260+ | $48,550–$116,520+ | $8,700–$20,880+ |
| Sandstone and timberfrontNational range (few local prices yet) | $800–$1,200/m | $38,840–$58,260 | $77,680–$116,520 | $13,920–$20,880 |
Grey price-source rows use a state or national fallback. A national range is indicative and may have few local prices.
Old fence removal and disposal usually adds $20–$40 per metre, typically about $30. That’s around 20% of a typical Colorbond or paling price (usually 15–25%).
Rocky or hard ground usually adds $15–$45 per metre, typically about $25. That’s around 15% of a typical Colorbond or paling rate (usually 10–25%). Very hard ground sits at the high end.
A plinth or sleeper under the fence, for a small level change or to close the gap at the bottom, usually adds $10–$30 per metre, typically about $20.
Slopes, retaining, trees and tight access are confirmed by your fencer. Extras are calculated separately and do not compound.
Shoalhaven fence rules · Read the full rules
A treated pine paling fence is $150–$200/m. Your typical 50/50 share for 97.1 m is $7,190–$9,710.
Neighbours generally split a sufficient dividing fence 50/50. If you want a higher standard, you pay the extra.
Up to 1.2 m in most residential zones without approval. A higher front fence needs a complying development certificate or a DA.
Yes. Removal is an optional per-metre extra. The fencer confirms the final cost and any licensed asbestos work.
Block-size source: NSW Cadastre (Lot layer) and NSW Administrative Boundaries (Suburb, LGA) © Spatial Services, NSW Department of Customer Service (CC BY 4.0). Last updated 17 Nov 2026. Cadastre: Vicmap © Department of Transport and Planning (Vic), NSW Spatial Services, Queensland Government (QSpatial), theLIST © State of Tasmania and ACTmapi, used under CC BY 4.0. SA, WA and NT block sizes are typical-block assumptions.
Your typical 50/50 share in Milton is $7,190–$9,710.
| Fencer | Fence | Height | Published rate | Source |
|---|---|---|---|---|
| No local source rows are published yet. | ||||
Price research is available in how we price.