Work out your fence
The block size is Median of 602 house lots in Enfield. The metres are an estimate; change them to match your property.
Enfield 2136 · Burwood · New South Wales
A standard fence costs $150–$180/m installed. Your half of a typical dividing fence is about $7,140–$8,470.
Your 50/50 share · treated pine paling
$7,140–$8,470
95.2 m on a typical block · Wider-area fencers’ prices (3 fencers)
The block size is Median of 602 house lots in Enfield. The metres are an estimate; change them to match your property.
| Fence | Price per metre | Your 50/50 share | Whole dividing fence | Front fence |
|---|---|---|---|---|
| Treated pine palingMost commondividing, frontWider-area fencers’ prices (3 fencers) | $150–$180/m | $7,140–$8,470 | $14,280–$16,950 | $1,820–$2,150 |
| Colorbond steeldividing, frontWider-area fencers’ prices (3 fencers) | $120–$140/m | $5,620–$6,810 | $11,230–$13,610 | $1,430–$1,730 |
| Chain wire / chain linkdividingNational range (few local prices yet) | $30–$150/m | $1,430–$7,140 | $2,860–$14,280 | $360–$1,820 |
| PVC / vinylfront, dividingNational range (few local prices yet) | $40–$90/m | $1,900–$4,280 | $3,810–$8,570 | $480–$1,090 |
| Timber picketfrontNational range (few local prices yet) | $60–$350/m | $2,760–$16,660 | $5,520–$33,320 | $700–$4,240 |
| Aluminium slat / pool fencingpool, front, screen, dividingNational range (few local prices yet) | $80–$400/m | $3,810–$19,040 | $7,620–$38,080 | $970–$4,840 |
| Tubular metalfront, poolNational range (few local prices yet) | $180–$350/m | $8,570–$16,660 | $17,140–$33,320 | $2,180–$4,240 |
| Hardwood paling / lapped and cappeddividing, frontNSW median of fencers’ prices | $180–$320/m | $8,760–$15,040 | $17,520–$30,080 | $2,230–$3,820 |
| Semi-frameless glasspool, frontNational range (few local prices yet) | $200–$280/m | $9,520–$13,090 | $19,040–$26,180 | $2,420–$3,330 |
| Timber slat / horizontal slat screenscreen, front, dividingNational range (few local prices yet) | $250–$450/m | $11,900–$21,420 | $23,800–$42,840 | $3,030–$5,450 |
| Frameless glasspoolNational range (few local prices yet) | $280–$700+/m | $13,090–$33,320+ | $26,180–$66,640+ | $3,330–$8,470+ |
| Wrought iron / cast ironfrontNational range (few local prices yet) | $450–$1,000/m | $21,420–$47,600 | $42,840–$95,200 | $5,450–$12,100 |
| Brick, stone or rendered masonryfront, dividingNational range (few local prices yet) | $500–$1,200+/m | $23,800–$57,120+ | $47,600–$114,240+ | $6,050–$14,520+ |
| Sandstone and timberfrontNational range (few local prices yet) | $800–$1,200/m | $38,080–$57,120 | $76,160–$114,240 | $9,680–$14,520 |
Grey price-source rows use a state or national fallback. A national range is indicative and may have few local prices.
Old fence removal and disposal usually adds $20–$40 per metre, typically about $30. That’s around 20% of a typical Colorbond or paling price (usually 15–25%).
Rocky or hard ground usually adds $15–$45 per metre, typically about $25. That’s around 15% of a typical Colorbond or paling rate (usually 10–25%). Very hard ground sits at the high end.
A plinth or sleeper under the fence, for a small level change or to close the gap at the bottom, usually adds $10–$30 per metre, typically about $20.
Slopes, retaining, trees and tight access are confirmed by your fencer. Extras are calculated separately and do not compound.
Burwood fence rules · Read the full rules
A treated pine paling fence is $150–$180/m. Your typical 50/50 share for 95.2 m is $7,140–$8,470.
Neighbours generally split a sufficient dividing fence 50/50. If you want a higher standard, you pay the extra.
Up to 1.2 m in most residential zones without approval. A higher front fence needs a complying development certificate or a DA.
Yes. Removal is an optional per-metre extra. The fencer confirms the final cost and any licensed asbestos work.
Block-size source: NSW Cadastre (Lot layer) and NSW Administrative Boundaries (Suburb, LGA) © Spatial Services, NSW Department of Customer Service (CC BY 4.0). Last updated 17 Nov 2026. Cadastre: Vicmap © Department of Transport and Planning (Vic), NSW Spatial Services, Queensland Government (QSpatial), theLIST © State of Tasmania and ACTmapi, used under CC BY 4.0. SA, WA and NT block sizes are typical-block assumptions.
Your typical 50/50 share in Enfield is $7,140–$8,470.
| Fencer | Fence | Height | Published rate | Source |
|---|---|---|---|---|
| Best Fence | Treated pine paling | Not stated | $200 | bestfence.com.au · checked 16 Nov 2026 |
| Best Fence | Colorbond | Not stated | $160 | bestfence.com.au · checked 16 Nov 2026 |
Price research is available in how we price.