Work out your fence
The block size is the median of 1,655 house lots in Burwood. The metres are an estimate; change them to match your property.
Burwood 2134 · Burwood · New South Wales
A standard fence costs $150–$180/m installed. Your half of a typical dividing fence is about $6,890–$8,170.
Your 50/50 share · treated pine paling
$6,890–$8,170
91.8 m on a typical block · Wider-area fencers’ prices (3 fencers)
The block size is the median of 1,655 house lots in Burwood. The metres are an estimate; change them to match your property.
| Fence | Per metre | Your share | Whole fence | Front fence |
|---|---|---|---|---|
| Treated pine palingMost commondividing, frontWider-area fencers’ prices (3 fencers) | $150–$180/m | $6,890–$8,170 | $13,770–$16,340 | $1,950–$2,310 |
| Colorbond steeldividing, frontWider-area fencers’ prices (3 fencers) | $120–$140/m | $5,420–$6,560 | $10,830–$13,130 | $1,530–$1,860 |
| Chain wire / chain linkdividingNational price | $30–$150/m | $1,380–$6,890 | $2,750–$13,770 | $390–$1,950 |
| PVC / vinylfront, dividingNational price | $40–$90/m | $1,840–$4,130 | $3,670–$8,260 | $520–$1,170 |
| Timber picketfrontNational price | $60–$350/m | $2,660–$16,070 | $5,320–$32,130 | $750–$4,550 |
| Aluminium slat / pool fencingpool, front, screen, dividingNational price | $80–$400/m | $3,670–$18,360 | $7,340–$36,720 | $1,040–$5,200 |
| Tubular metalfront, poolNational price | $180–$350/m | $8,260–$16,070 | $16,520–$32,130 | $2,340–$4,550 |
| Hardwood paling / lapped and cappeddividing, frontNSW median of fencers’ prices | $180–$320/m | $8,450–$14,500 | $16,890–$29,010 | $2,390–$4,110 |
| Semi-frameless glasspool, frontNational price | $200–$280/m | $9,180–$12,620 | $18,360–$25,250 | $2,600–$3,580 |
| Timber slat / horizontal slat screenscreen, front, dividingNational price | $250–$450/m | $11,480–$20,660 | $22,950–$41,310 | $3,250–$5,850 |
| Frameless glasspoolNational price | $280–$700+/m | $12,620–$32,130+ | $25,250–$64,260+ | $3,580–$9,100+ |
| Wrought iron / cast ironfrontNational price | $450–$1,000/m | $20,660–$45,900 | $41,310–$91,800 | $5,850–$13,000 |
| Brick, stone or rendered masonryfront, dividingNational price | $500–$1,200+/m | $22,950–$55,080+ | $45,900–$110,160+ | $6,500–$15,600+ |
| Sandstone and timberfrontNational price | $800–$1,200/m | $36,720–$55,080 | $73,440–$110,160 | $10,400–$15,600 |
Rows marked National price use the national range because we have fewer than 2 local fencer prices for that type. See published prices.
Old fence removal and disposal usually adds $20–$40 per metre, typically about $30. That’s around 20% of a typical Colorbond or paling price (usually 15–25%).
Rocky or hard ground usually adds $15–$45 per metre, typically about $25. That’s around 15% of a typical Colorbond or paling rate (usually 10–25%). Very hard ground sits at the high end.
A plinth or sleeper under the fence, for a small level change or to close the gap at the bottom, usually adds $10–$30 per metre, typically about $20.
Slopes, retaining, trees and tight access are confirmed by your fencer. Extras are calculated separately and do not compound.
Burwood fence rules · Read the full rules
A treated pine paling fence is $150–$180/m. Your typical 50/50 share for 91.8 m is $6,890–$8,170.
Neighbours generally split a sufficient dividing fence 50/50. If you want a higher standard, you pay the extra.
Up to 1.2 m in most residential zones without approval. A higher front fence needs a complying development certificate or a DA.
Yes. Removal is an optional per-metre extra. The fencer confirms the final cost and any licensed asbestos work.
Block-size source: NSW Cadastre (Lot layer) and NSW Administrative Boundaries (Suburb, LGA) © Spatial Services, NSW Department of Customer Service (CC BY 4.0). Last updated 17 Nov 2026. Cadastre: Vicmap © Department of Transport and Planning (Vic), NSW Spatial Services, Queensland Government (QSpatial), theLIST © State of Tasmania and ACTmapi, used under CC BY 4.0. SA, WA and NT block sizes are typical-block assumptions.
Your typical 50/50 share in Burwood is $6,890–$8,170.