Work out your fence
The block size is Median of 260 house lots in Colo Vale. The metres are an estimate; change them to match your property.
Colo Vale 2575 · Wingecarribee · New South Wales
A standard fence costs $150–$200/m installed. Your half of a typical dividing fence is about $8,570–$11,580.
Your 50/50 share · treated pine paling
$8,570–$11,580
115.8 m on a typical block · NSW median of fencers’ prices
The block size is Median of 260 house lots in Colo Vale. The metres are an estimate; change them to match your property.
| Fence | Price per metre | Your 50/50 share | Whole dividing fence | Front fence |
|---|---|---|---|---|
| Treated pine palingMost commondividing, frontNSW median of fencers’ prices | $150–$200/m | $8,570–$11,580 | $17,140–$23,160 | $2,260–$3,060 |
| Colorbond steeldividing, frontNSW median of fencers’ prices | $130–$160/m | $7,240–$9,150 | $14,480–$18,300 | $1,910–$2,420 |
| Chain wire / chain linkdividingNational range (few local prices yet) | $30–$150/m | $1,740–$8,690 | $3,470–$17,370 | $460–$2,300 |
| PVC / vinylfront, dividingNational range (few local prices yet) | $40–$90/m | $2,320–$5,210 | $4,630–$10,420 | $610–$1,380 |
| Timber picketfrontNational range (few local prices yet) | $60–$350/m | $3,360–$20,270 | $6,720–$40,530 | $890–$5,360 |
| Aluminium slat / pool fencingpool, front, screen, dividingNational range (few local prices yet) | $80–$400/m | $4,630–$23,160 | $9,260–$46,320 | $1,220–$6,120 |
| Tubular metalfront, poolNational range (few local prices yet) | $180–$350/m | $10,420–$20,270 | $20,840–$40,530 | $2,750–$5,360 |
| Hardwood paling / lapped and cappeddividing, frontNSW median of fencers’ prices | $180–$320/m | $10,650–$18,300 | $21,310–$36,590 | $2,820–$4,830 |
| Semi-frameless glasspool, frontNational range (few local prices yet) | $200–$280/m | $11,580–$15,920 | $23,160–$31,850 | $3,060–$4,210 |
| Timber slat / horizontal slat screenscreen, front, dividingNational range (few local prices yet) | $250–$450/m | $14,480–$26,060 | $28,950–$52,110 | $3,830–$6,890 |
| Frameless glasspoolNational range (few local prices yet) | $280–$700+/m | $15,920–$40,530+ | $31,850–$81,060+ | $4,210–$10,710+ |
| Wrought iron / cast ironfrontNational range (few local prices yet) | $450–$1,000/m | $26,060–$57,900 | $52,110–$115,800 | $6,890–$15,300 |
| Brick, stone or rendered masonryfront, dividingNational range (few local prices yet) | $500–$1,200+/m | $28,950–$69,480+ | $57,900–$138,960+ | $7,650–$18,360+ |
| Sandstone and timberfrontNational range (few local prices yet) | $800–$1,200/m | $46,320–$69,480 | $92,640–$138,960 | $12,240–$18,360 |
Grey price-source rows use a state or national fallback. A national range is indicative and may have few local prices.
Old fence removal and disposal usually adds $20–$40 per metre, typically about $30. That’s around 20% of a typical Colorbond or paling price (usually 15–25%).
Rocky or hard ground usually adds $15–$45 per metre, typically about $25. That’s around 15% of a typical Colorbond or paling rate (usually 10–25%). Very hard ground sits at the high end.
A plinth or sleeper under the fence, for a small level change or to close the gap at the bottom, usually adds $10–$30 per metre, typically about $20.
Slopes, retaining, trees and tight access are confirmed by your fencer. Extras are calculated separately and do not compound.
Wingecarribee fence rules · Read the full rules
A treated pine paling fence is $150–$200/m. Your typical 50/50 share for 115.8 m is $8,570–$11,580.
Neighbours generally split a sufficient dividing fence 50/50. If you want a higher standard, you pay the extra.
Up to 1.2 m in most residential zones without approval. A higher front fence needs a complying development certificate or a DA.
Yes. Removal is an optional per-metre extra. The fencer confirms the final cost and any licensed asbestos work.
Block-size source: NSW Cadastre (Lot layer) and NSW Administrative Boundaries (Suburb, LGA) © Spatial Services, NSW Department of Customer Service (CC BY 4.0). Last updated 17 Nov 2026. Cadastre: Vicmap © Department of Transport and Planning (Vic), NSW Spatial Services, Queensland Government (QSpatial), theLIST © State of Tasmania and ACTmapi, used under CC BY 4.0. SA, WA and NT block sizes are typical-block assumptions.
Your typical 50/50 share in Colo Vale is $8,570–$11,580.
| Fencer | Fence | Height | Published rate | Source |
|---|---|---|---|---|
| No local source rows are published yet. | ||||
Price research is available in how we price.