Work out your fence
The block size is the median of 2 house lots in Canyonleigh. The metres are an estimate; change them to match your property.
Canyonleigh 2577 · Wingecarribee · New South Wales
A standard fence costs $150–$200/m installed. Your half of a typical dividing fence is about $4,570–$6,180.
Your 50/50 share · treated pine paling
$4,570–$6,180
61.8 m on a typical block · NSW median of fencers’ prices
The block size is the median of 2 house lots in Canyonleigh. The metres are an estimate; change them to match your property.
| Fence | Per metre | Your share | Whole fence | Front fence |
|---|---|---|---|---|
| Treated pine palingMost commondividing, frontNSW median of fencers’ prices | $150–$200/m | $4,570–$6,180 | $9,150–$12,360 | $1,860–$2,520 |
| Colorbond steeldividing, frontNSW median of fencers’ prices | $130–$160/m | $3,860–$4,880 | $7,730–$9,760 | $1,580–$1,990 |
| Chain wire / chain linkdividingNational price | $30–$150/m | $930–$4,640 | $1,850–$9,270 | $380–$1,890 |
| PVC / vinylfront, dividingNational price | $40–$90/m | $1,240–$2,780 | $2,470–$5,560 | $500–$1,130 |
| Timber picketfrontNational price | $60–$350/m | $1,790–$10,820 | $3,580–$21,630 | $730–$4,410 |
| Aluminium slat / pool fencingpool, front, screen, dividingNational price | $80–$400/m | $2,470–$12,360 | $4,940–$24,720 | $1,010–$5,040 |
| Tubular metalfront, poolNational price | $180–$350/m | $5,560–$10,820 | $11,120–$21,630 | $2,270–$4,410 |
| Hardwood paling / lapped and cappeddividing, frontNSW median of fencers’ prices | $180–$320/m | $5,690–$9,760 | $11,370–$19,530 | $2,320–$3,980 |
| Semi-frameless glasspool, frontNational price | $200–$280/m | $6,180–$8,500 | $12,360–$17,000 | $2,520–$3,470 |
| Timber slat / horizontal slat screenscreen, front, dividingNational price | $250–$450/m | $7,730–$13,910 | $15,450–$27,810 | $3,150–$5,670 |
| Frameless glasspoolNational price | $280–$700+/m | $8,500–$21,630+ | $17,000–$43,260+ | $3,470–$8,820+ |
| Wrought iron / cast ironfrontNational price | $450–$1,000/m | $13,910–$30,900 | $27,810–$61,800 | $5,670–$12,600 |
| Brick, stone or rendered masonryfront, dividingNational price | $500–$1,200+/m | $15,450–$37,080+ | $30,900–$74,160+ | $6,300–$15,120+ |
| Sandstone and timberfrontNational price | $800–$1,200/m | $24,720–$37,080 | $49,440–$74,160 | $10,080–$15,120 |
Rows marked National price use the national range because we have fewer than 2 local fencer prices for that type. See published prices.
Old fence removal and disposal usually adds $20–$40 per metre, typically about $30. That’s around 20% of a typical Colorbond or paling price (usually 15–25%).
Rocky or hard ground usually adds $15–$45 per metre, typically about $25. That’s around 15% of a typical Colorbond or paling rate (usually 10–25%). Very hard ground sits at the high end.
A plinth or sleeper under the fence, for a small level change or to close the gap at the bottom, usually adds $10–$30 per metre, typically about $20.
Slopes, retaining, trees and tight access are confirmed by your fencer. Extras are calculated separately and do not compound.
Wingecarribee fence rules · Read the full rules
A treated pine paling fence is $150–$200/m. Your typical 50/50 share for 61.8 m is $4,570–$6,180.
Neighbours generally split a sufficient dividing fence 50/50. If you want a higher standard, you pay the extra.
Up to 1.2 m in most residential zones without approval. A higher front fence needs a complying development certificate or a DA.
Yes. Removal is an optional per-metre extra. The fencer confirms the final cost and any licensed asbestos work.
Block-size source: NSW Cadastre (Lot layer) and NSW Administrative Boundaries (Suburb, LGA) © Spatial Services, NSW Department of Customer Service (CC BY 4.0). Last updated 17 Nov 2026. Cadastre: Vicmap © Department of Transport and Planning (Vic), NSW Spatial Services, Queensland Government (QSpatial), theLIST © State of Tasmania and ACTmapi, used under CC BY 4.0. SA, WA and NT block sizes are typical-block assumptions.
Your typical 50/50 share in Canyonleigh is $4,570–$6,180.