Work out your fence
The block size is Median of 920 house lots in Callala Beach. The metres are an estimate; change them to match your property.
Callala Beach 2540 · Shoalhaven · New South Wales
A standard fence costs $150–$200/m installed. Your half of a typical dividing fence is about $7,030–$9,500.
Your 50/50 share · treated pine paling
$7,030–$9,500
95 m on a typical block · NSW median of fencers’ prices
The block size is Median of 920 house lots in Callala Beach. The metres are an estimate; change them to match your property.
| Fence | Price per metre | Your 50/50 share | Whole dividing fence | Front fence |
|---|---|---|---|---|
| Treated pine palingMost commondividing, frontNSW median of fencers’ prices | $150–$200/m | $7,030–$9,500 | $14,060–$19,000 | $2,250–$3,040 |
| Colorbond steeldividing, frontNSW median of fencers’ prices | $130–$160/m | $5,940–$7,510 | $11,880–$15,010 | $1,900–$2,400 |
| Chain wire / chain linkdividingNational range (few local prices yet) | $30–$150/m | $1,430–$7,130 | $2,850–$14,250 | $460–$2,280 |
| PVC / vinylfront, dividingNational range (few local prices yet) | $40–$90/m | $1,900–$4,280 | $3,800–$8,550 | $610–$1,370 |
| Timber picketfrontNational range (few local prices yet) | $60–$350/m | $2,760–$16,630 | $5,510–$33,250 | $880–$5,320 |
| Aluminium slat / pool fencingpool, front, screen, dividingNational range (few local prices yet) | $80–$400/m | $3,800–$19,000 | $7,600–$38,000 | $1,220–$6,080 |
| Tubular metalfront, poolNational range (few local prices yet) | $180–$350/m | $8,550–$16,630 | $17,100–$33,250 | $2,740–$5,320 |
| Hardwood paling / lapped and cappeddividing, frontNSW median of fencers’ prices | $180–$320/m | $8,740–$15,010 | $17,480–$30,020 | $2,800–$4,800 |
| Semi-frameless glasspool, frontNational range (few local prices yet) | $200–$280/m | $9,500–$13,060 | $19,000–$26,130 | $3,040–$4,180 |
| Timber slat / horizontal slat screenscreen, front, dividingNational range (few local prices yet) | $250–$450/m | $11,880–$21,380 | $23,750–$42,750 | $3,800–$6,840 |
| Frameless glasspoolNational range (few local prices yet) | $280–$700+/m | $13,060–$33,250+ | $26,130–$66,500+ | $4,180–$10,640+ |
| Wrought iron / cast ironfrontNational range (few local prices yet) | $450–$1,000/m | $21,380–$47,500 | $42,750–$95,000 | $6,840–$15,200 |
| Brick, stone or rendered masonryfront, dividingNational range (few local prices yet) | $500–$1,200+/m | $23,750–$57,000+ | $47,500–$114,000+ | $7,600–$18,240+ |
| Sandstone and timberfrontNational range (few local prices yet) | $800–$1,200/m | $38,000–$57,000 | $76,000–$114,000 | $12,160–$18,240 |
Grey price-source rows use a state or national fallback. A national range is indicative and may have few local prices.
Old fence removal and disposal usually adds $20–$40 per metre, typically about $30. That’s around 20% of a typical Colorbond or paling price (usually 15–25%).
Rocky or hard ground usually adds $15–$45 per metre, typically about $25. That’s around 15% of a typical Colorbond or paling rate (usually 10–25%). Very hard ground sits at the high end.
A plinth or sleeper under the fence, for a small level change or to close the gap at the bottom, usually adds $10–$30 per metre, typically about $20.
Slopes, retaining, trees and tight access are confirmed by your fencer. Extras are calculated separately and do not compound.
Shoalhaven fence rules · Read the full rules
A treated pine paling fence is $150–$200/m. Your typical 50/50 share for 95 m is $7,030–$9,500.
Neighbours generally split a sufficient dividing fence 50/50. If you want a higher standard, you pay the extra.
Up to 1.2 m in most residential zones without approval. A higher front fence needs a complying development certificate or a DA.
Yes. Removal is an optional per-metre extra. The fencer confirms the final cost and any licensed asbestos work.
Block-size source: NSW Cadastre (Lot layer) and NSW Administrative Boundaries (Suburb, LGA) © Spatial Services, NSW Department of Customer Service (CC BY 4.0). Last updated 17 Nov 2026. Cadastre: Vicmap © Department of Transport and Planning (Vic), NSW Spatial Services, Queensland Government (QSpatial), theLIST © State of Tasmania and ACTmapi, used under CC BY 4.0. SA, WA and NT block sizes are typical-block assumptions.
Your typical 50/50 share in Callala Beach is $7,030–$9,500.
| Fencer | Fence | Height | Published rate | Source |
|---|---|---|---|---|
| No local source rows are published yet. | ||||
Price research is available in how we price.