Work out your fence
The block size is Median of 24 house lots in Burradoo. The metres are an estimate; change them to match your property.
Burradoo 2576 · Wingecarribee · New South Wales
A standard fence costs $150–$200/m installed. Your half of a typical dividing fence is about $8,730–$11,800.
Your 50/50 share · treated pine paling
$8,730–$11,800
118 m on a typical block · NSW median of fencers’ prices
The block size is Median of 24 house lots in Burradoo. The metres are an estimate; change them to match your property.
| Fence | Price per metre | Your 50/50 share | Whole dividing fence | Front fence |
|---|---|---|---|---|
| Treated pine palingMost commondividing, frontNSW median of fencers’ prices | $150–$200/m | $8,730–$11,800 | $17,460–$23,600 | $2,550–$3,440 |
| Colorbond steeldividing, frontNSW median of fencers’ prices | $130–$160/m | $7,380–$9,320 | $14,750–$18,640 | $2,150–$2,720 |
| Chain wire / chain linkdividingNational range (few local prices yet) | $30–$150/m | $1,770–$8,850 | $3,540–$17,700 | $520–$2,580 |
| PVC / vinylfront, dividingNational range (few local prices yet) | $40–$90/m | $2,360–$5,310 | $4,720–$10,620 | $690–$1,550 |
| Timber picketfrontNational range (few local prices yet) | $60–$350/m | $3,420–$20,650 | $6,840–$41,300 | $1,000–$6,020 |
| Aluminium slat / pool fencingpool, front, screen, dividingNational range (few local prices yet) | $80–$400/m | $4,720–$23,600 | $9,440–$47,200 | $1,380–$6,880 |
| Tubular metalfront, poolNational range (few local prices yet) | $180–$350/m | $10,620–$20,650 | $21,240–$41,300 | $3,100–$6,020 |
| Hardwood paling / lapped and cappeddividing, frontNSW median of fencers’ prices | $180–$320/m | $10,860–$18,640 | $21,710–$37,290 | $3,160–$5,440 |
| Semi-frameless glasspool, frontNational range (few local prices yet) | $200–$280/m | $11,800–$16,230 | $23,600–$32,450 | $3,440–$4,730 |
| Timber slat / horizontal slat screenscreen, front, dividingNational range (few local prices yet) | $250–$450/m | $14,750–$26,550 | $29,500–$53,100 | $4,300–$7,740 |
| Frameless glasspoolNational range (few local prices yet) | $280–$700+/m | $16,230–$41,300+ | $32,450–$82,600+ | $4,730–$12,040+ |
| Wrought iron / cast ironfrontNational range (few local prices yet) | $450–$1,000/m | $26,550–$59,000 | $53,100–$118,000 | $7,740–$17,200 |
| Brick, stone or rendered masonryfront, dividingNational range (few local prices yet) | $500–$1,200+/m | $29,500–$70,800+ | $59,000–$141,600+ | $8,600–$20,640+ |
| Sandstone and timberfrontNational range (few local prices yet) | $800–$1,200/m | $47,200–$70,800 | $94,400–$141,600 | $13,760–$20,640 |
Grey price-source rows use a state or national fallback. A national range is indicative and may have few local prices.
Old fence removal and disposal usually adds $20–$40 per metre, typically about $30. That’s around 20% of a typical Colorbond or paling price (usually 15–25%).
Rocky or hard ground usually adds $15–$45 per metre, typically about $25. That’s around 15% of a typical Colorbond or paling rate (usually 10–25%). Very hard ground sits at the high end.
A plinth or sleeper under the fence, for a small level change or to close the gap at the bottom, usually adds $10–$30 per metre, typically about $20.
Slopes, retaining, trees and tight access are confirmed by your fencer. Extras are calculated separately and do not compound.
Wingecarribee fence rules · Read the full rules
A treated pine paling fence is $150–$200/m. Your typical 50/50 share for 118 m is $8,730–$11,800.
Neighbours generally split a sufficient dividing fence 50/50. If you want a higher standard, you pay the extra.
Up to 1.2 m in most residential zones without approval. A higher front fence needs a complying development certificate or a DA.
Yes. Removal is an optional per-metre extra. The fencer confirms the final cost and any licensed asbestos work.
Block-size source: NSW Cadastre (Lot layer) and NSW Administrative Boundaries (Suburb, LGA) © Spatial Services, NSW Department of Customer Service (CC BY 4.0). Last updated 17 Nov 2026. Cadastre: Vicmap © Department of Transport and Planning (Vic), NSW Spatial Services, Queensland Government (QSpatial), theLIST © State of Tasmania and ACTmapi, used under CC BY 4.0. SA, WA and NT block sizes are typical-block assumptions.
Your typical 50/50 share in Burradoo is $8,730–$11,800.
| Fencer | Fence | Height | Published rate | Source |
|---|---|---|---|---|
| No local source rows are published yet. | ||||
Price research is available in how we price.