Work out your fence
The block size is Median of 3 house lots in Bilambil. The metres are an estimate; change them to match your property.
Bilambil 2486 · Tweed · New South Wales
A standard fence costs $150–$180/m installed. Your half of a typical dividing fence is about $8,000–$9,490.
Your 50/50 share · treated pine paling
$8,000–$9,490
106.6 m on a typical block · Wider-area fencers’ prices (3 fencers)
The block size is Median of 3 house lots in Bilambil. The metres are an estimate; change them to match your property.
| Fence | Price per metre | Your 50/50 share | Whole dividing fence | Front fence |
|---|---|---|---|---|
| Treated pine palingMost commondividing, frontWider-area fencers’ prices (3 fencers) | $150–$180/m | $8,000–$9,490 | $15,990–$18,970 | $2,900–$3,440 |
| Colorbond steeldividing, frontWider-area fencers’ prices (3 fencers) | $120–$140/m | $6,290–$7,620 | $12,580–$15,240 | $2,280–$2,760 |
| Chain wire / chain linkdividingNational range (few local prices yet) | $30–$150/m | $1,600–$8,000 | $3,200–$15,990 | $580–$2,900 |
| PVC / vinylfront, dividingNational range (few local prices yet) | $40–$90/m | $2,130–$4,800 | $4,260–$9,590 | $770–$1,740 |
| Timber picketfrontNational range (few local prices yet) | $60–$350/m | $3,090–$18,660 | $6,180–$37,310 | $1,120–$6,760 |
| Aluminium slat / pool fencingpool, front, screen, dividingNational range (few local prices yet) | $80–$400/m | $4,260–$21,320 | $8,530–$42,640 | $1,540–$7,720 |
| Tubular metalfront, poolNational range (few local prices yet) | $180–$350/m | $9,590–$18,660 | $19,190–$37,310 | $3,470–$6,760 |
| Hardwood paling / lapped and cappeddividing, frontNSW median of fencers’ prices | $180–$320/m | $9,810–$16,840 | $19,610–$33,690 | $3,550–$6,100 |
| Semi-frameless glasspool, frontNational range (few local prices yet) | $200–$280/m | $10,660–$14,660 | $21,320–$29,320 | $3,860–$5,310 |
| Timber slat / horizontal slat screenscreen, front, dividingNational range (few local prices yet) | $250–$450/m | $13,330–$23,990 | $26,650–$47,970 | $4,830–$8,690 |
| Frameless glasspoolNational range (few local prices yet) | $280–$700+/m | $14,660–$37,310+ | $29,320–$74,620+ | $5,310–$13,510+ |
| Wrought iron / cast ironfrontNational range (few local prices yet) | $450–$1,000/m | $23,990–$53,300 | $47,970–$106,600 | $8,690–$19,300 |
| Brick, stone or rendered masonryfront, dividingNational range (few local prices yet) | $500–$1,200+/m | $26,650–$63,960+ | $53,300–$127,920+ | $9,650–$23,160+ |
| Sandstone and timberfrontNational range (few local prices yet) | $800–$1,200/m | $42,640–$63,960 | $85,280–$127,920 | $15,440–$23,160 |
Grey price-source rows use a state or national fallback. A national range is indicative and may have few local prices.
Old fence removal and disposal usually adds $20–$40 per metre, typically about $30. That’s around 20% of a typical Colorbond or paling price (usually 15–25%).
Rocky or hard ground usually adds $15–$45 per metre, typically about $25. That’s around 15% of a typical Colorbond or paling rate (usually 10–25%). Very hard ground sits at the high end.
A plinth or sleeper under the fence, for a small level change or to close the gap at the bottom, usually adds $10–$30 per metre, typically about $20.
Slopes, retaining, trees and tight access are confirmed by your fencer. Extras are calculated separately and do not compound.
Tweed fence rules · Read the full rules
A treated pine paling fence is $150–$180/m. Your typical 50/50 share for 106.6 m is $8,000–$9,490.
Neighbours generally split a sufficient dividing fence 50/50. If you want a higher standard, you pay the extra.
Up to 1.2 m in most residential zones without approval. A higher front fence needs a complying development certificate or a DA.
Yes. Removal is an optional per-metre extra. The fencer confirms the final cost and any licensed asbestos work.
Block-size source: NSW Cadastre (Lot layer) and NSW Administrative Boundaries (Suburb, LGA) © Spatial Services, NSW Department of Customer Service (CC BY 4.0). Last updated 17 Nov 2026. Cadastre: Vicmap © Department of Transport and Planning (Vic), NSW Spatial Services, Queensland Government (QSpatial), theLIST © State of Tasmania and ACTmapi, used under CC BY 4.0. SA, WA and NT block sizes are typical-block assumptions.
Your typical 50/50 share in Bilambil is $8,000–$9,490.
| Fencer | Fence | Height | Published rate | Source |
|---|---|---|---|---|
| No local source rows are published yet. | ||||
Price research is available in how we price.