Work out your fence
The block size is Median of 461 house lots in Bawley Point. The metres are an estimate; change them to match your property.
Bawley Point 2539 · Shoalhaven · New South Wales
A standard fence costs $150–$200/m installed. Your half of a typical dividing fence is about $6,830–$9,230.
Your 50/50 share · treated pine paling
$6,830–$9,230
92.3 m on a typical block · NSW median of fencers’ prices
The block size is Median of 461 house lots in Bawley Point. The metres are an estimate; change them to match your property.
| Fence | Price per metre | Your 50/50 share | Whole dividing fence | Front fence |
|---|---|---|---|---|
| Treated pine palingMost commondividing, frontNSW median of fencers’ prices | $150–$200/m | $6,830–$9,230 | $13,660–$18,460 | $2,620–$3,540 |
| Colorbond steeldividing, frontNSW median of fencers’ prices | $130–$160/m | $5,770–$7,290 | $11,540–$14,580 | $2,210–$2,800 |
| Chain wire / chain linkdividingNational range (few local prices yet) | $30–$150/m | $1,380–$6,920 | $2,770–$13,850 | $530–$2,660 |
| PVC / vinylfront, dividingNational range (few local prices yet) | $40–$90/m | $1,850–$4,150 | $3,690–$8,310 | $710–$1,590 |
| Timber picketfrontNational range (few local prices yet) | $60–$350/m | $2,680–$16,150 | $5,350–$32,310 | $1,030–$6,200 |
| Aluminium slat / pool fencingpool, front, screen, dividingNational range (few local prices yet) | $80–$400/m | $3,690–$18,460 | $7,380–$36,920 | $1,420–$7,080 |
| Tubular metalfront, poolNational range (few local prices yet) | $180–$350/m | $8,310–$16,150 | $16,610–$32,310 | $3,190–$6,200 |
| Hardwood paling / lapped and cappeddividing, frontNSW median of fencers’ prices | $180–$320/m | $8,490–$14,580 | $16,980–$29,170 | $3,260–$5,590 |
| Semi-frameless glasspool, frontNational range (few local prices yet) | $200–$280/m | $9,230–$12,690 | $18,460–$25,380 | $3,540–$4,870 |
| Timber slat / horizontal slat screenscreen, front, dividingNational range (few local prices yet) | $250–$450/m | $11,540–$20,770 | $23,080–$41,540 | $4,430–$7,970 |
| Frameless glasspoolNational range (few local prices yet) | $280–$700+/m | $12,690–$32,310+ | $25,380–$64,610+ | $4,870–$12,390+ |
| Wrought iron / cast ironfrontNational range (few local prices yet) | $450–$1,000/m | $20,770–$46,150 | $41,540–$92,300 | $7,970–$17,700 |
| Brick, stone or rendered masonryfront, dividingNational range (few local prices yet) | $500–$1,200+/m | $23,080–$55,380+ | $46,150–$110,760+ | $8,850–$21,240+ |
| Sandstone and timberfrontNational range (few local prices yet) | $800–$1,200/m | $36,920–$55,380 | $73,840–$110,760 | $14,160–$21,240 |
Grey price-source rows use a state or national fallback. A national range is indicative and may have few local prices.
Old fence removal and disposal usually adds $20–$40 per metre, typically about $30. That’s around 20% of a typical Colorbond or paling price (usually 15–25%).
Rocky or hard ground usually adds $15–$45 per metre, typically about $25. That’s around 15% of a typical Colorbond or paling rate (usually 10–25%). Very hard ground sits at the high end.
A plinth or sleeper under the fence, for a small level change or to close the gap at the bottom, usually adds $10–$30 per metre, typically about $20.
Slopes, retaining, trees and tight access are confirmed by your fencer. Extras are calculated separately and do not compound.
Shoalhaven fence rules · Read the full rules
A treated pine paling fence is $150–$200/m. Your typical 50/50 share for 92.3 m is $6,830–$9,230.
Neighbours generally split a sufficient dividing fence 50/50. If you want a higher standard, you pay the extra.
Up to 1.2 m in most residential zones without approval. A higher front fence needs a complying development certificate or a DA.
Yes. Removal is an optional per-metre extra. The fencer confirms the final cost and any licensed asbestos work.
Block-size source: NSW Cadastre (Lot layer) and NSW Administrative Boundaries (Suburb, LGA) © Spatial Services, NSW Department of Customer Service (CC BY 4.0). Last updated 17 Nov 2026. Cadastre: Vicmap © Department of Transport and Planning (Vic), NSW Spatial Services, Queensland Government (QSpatial), theLIST © State of Tasmania and ACTmapi, used under CC BY 4.0. SA, WA and NT block sizes are typical-block assumptions.
Your typical 50/50 share in Bawley Point is $6,830–$9,230.
| Fencer | Fence | Height | Published rate | Source |
|---|---|---|---|---|
| No local source rows are published yet. | ||||
Price research is available in how we price.