The state pool barrier summary lists a minimum height of 1.2 m. Check your pool, boundary and local approval requirements before building.
Published state rule
1.2 m
Barriers at least 1.2 m high. A boundary fence used as the barrier must be 1.8 m on the pool side. Pool fences need approval with the pool.
Pool or spaBarrier standards apply
Check firstRegistration and inspections vary
01Key rules
South Australia pool barrier rules
Minimum height
1.2 m
Published summary
Barriers at least 1.2 m high. A boundary fence used as the barrier must be 1.8 m on the pool side. Pool fences need approval with the pool.
Official wording
Read the official wording
Pools and spas must have a permanent safety barrier at least 1.2 m high that children cannot climb over or crawl under; a boundary fence forming part of the barrier must be 1.8 m high on the pool side with a 900 mm non-climbable zone; gates must swing outward and self-close and self-latch. Pool fences need development approval with the pool. When selling, no certificate is needed for an existing pool, but pools built before 1 July 1993 must meet Ministerial Building Standard MBS 004 before settlement.